{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "3030-t-slot-extrusion-inch",
 "name": "3030 T-slot extrusion, 3 × 3 in (15-series inch)",
 "kind": "hardware",
 "category": "Hardware",
 "group": "Framing",
 "year": null,
 "question": "What are the exact dimensions of 3030 T-slot extrusion (3 × 3 in)?",
 "tags": [
  "extrusion",
  "t-slot",
  "aluminum extrusion",
  "frame",
  "3030",
  "1.5 in 15-series"
 ],
 "aliases": [
  "3030 extrusion step",
  "3030 extrusion dxf",
  "3030 extrusion dimensions",
  "3030 aluminum extrusion cad",
  "3x3 extrusion profile",
  "3030 t slot profile",
  "3x3 extrusion",
  "2x2 square t-slot extrusion",
  "double square extrusion",
  "8020 3030 cad",
  "80/20 3030 dimensions",
  "3030 t-slot step file"
 ],
 "overall_mm": {
  "length": null,
  "width": 76.2,
  "height": 76.2
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": false,
 "free_files": 16,
 "url": "https://xemstudio.com/objects/3030-t-slot-extrusion-inch/",
 "sheet_txt": "https://xemstudio.com/objects/3030-t-slot-extrusion-inch/sheet.txt",
 "sheet": {
  "basis": "80/20 Inc. 15 series (1.5 in), from 80/20's dimensioned drawing of this profile; every slot, lip, cavity, bore and outline number is the drawing's",
  "overall_mm": {
   "length": null,
   "width": 76.2,
   "height": 76.2
  },
  "notes": [
   "3030 T-slot extrusion, 3 × 3 in (15-series inch): 3 × 3 in, 8 slots on a 1.500 in = 38.100 mm pitch (80/20 Inc. 15 series (1.5 in)). Source: 80/20's dimensioned drawing of this profile. Files: STEP and STL at 100, 1000 mm and 6, 8, 10, 12, 15, 18, 20, 24, 30, 36, 42, 48, 60, 72 in with square ends, and a DXF of the exact cross-section (mm), the master to extrude to any length. The section is centred on the origin and extruded along +Z from z = 0.",
   "Slot: opening 0.320 in = 8.128 mm, lip 0.160 in = 4.064 mm thick at the opening under a 2° drop-lock slope (0.169 in = 4.281 mm at the cavity wall), cavity 0.810 in = 20.574 mm wide under the lips, 0.484 in = 12.294 mm from the face to the cavity floor. Centre bore Ø0.262 in = 6.655 mm per cell (the largest thread whose tap drill fits inside: 5/16-18, 6.53 mm).",
   "Cavity side walls: the cavity is 0.810 in = 20.574 mm wide under the lips, then follows the diagonal webs (0.160 in = 4.064 mm thick, stated) down to the floor; the webs lie on the cell diagonals (45°), as drawn.",
   "The closed hollows between cells are not fully dimensioned on the drawing, so they are drawn filled: the outline, slots and bores are exact, the bar is heavier than the real one.",
   "The drawing does not dimension the outer corner radii, so the corners are square: a pocket cut from this file clears the real rounded corners. The small alignment grooves on the faces are not dimensioned and are left off (the faces are flat).",
   "Wrapping it: to make a part that fits around the bar, subtract the 1000 mm file (or extrude the DXF) from your solid; the outline is the drawing's 3 × 3 in with no allowance, so open the pocket by your process's socket fit (see Mating features).",
   "Attachments: the 1.5 in 15-series T-nuts, end caps, feet, brackets, gussets, plates and slot covers are cut from these same numbers; the fit check (tools/asm_extrusion_fit.py) placed each one on this profile with zero overlap."
  ],
  "table": {
   "columns": [
    "feature",
    "size",
    "from"
   ],
   "rows": [
    [
     "outline",
     "3 × 3 in",
     "drawing"
    ],
    [
     "slot pitch",
     "1.500 in = 38.100 mm",
     "drawing"
    ],
    [
     "slot opening",
     "0.320 in = 8.128 mm",
     "drawing"
    ],
    [
     "lip thickness at the opening",
     "0.160 in = 4.064 mm",
     "drawing"
    ],
    [
     "lip underside slope (drop lock)",
     "2°",
     "maker's page"
    ],
    [
     "cavity width under the lips",
     "0.810 in = 20.574 mm",
     "drawing"
    ],
    [
     "face to cavity floor",
     "0.484 in = 12.294 mm",
     "drawing"
    ],
    [
     "cavity depth under the lip (at the cavity wall)",
     "0.315 in = 8.012 mm",
     "drawing"
    ],
    [
     "core between opposite floors",
     "0.532 in = 13.513 mm",
     "pitch − 2 × face-to-floor (drawing: 0.531 in)"
    ],
    [
     "diagonal web",
     "0.160 in = 4.064 mm",
     "drawing"
    ],
    [
     "centre bore",
     "Ø0.262 in = 6.655 mm × 4",
     "drawing"
    ],
    [
     "cross-section area",
     "3.212 in² (2072 mm²)",
     "maker's page"
    ],
    [
     "weight",
     "0.3132 lb/in (3.758 lb/ft; 5.59 kg/m)",
     "maker's page (ft and kg/m converted)"
    ],
    [
     "Ix / Iy",
     "3.4133 / 3.4133 in⁴",
     "maker's page"
    ],
    [
     "area of this model's section",
     "4387.5 mm² (6.801 in²)",
     "computed from the DXF"
    ]
   ]
  }
 },
 "sheet_text": "3030 T-slot extrusion, 3 × 3 in (15-series inch) — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/3030-t-slot-extrusion-inch/  (sheet CC BY 4.0)\nBasis: 80/20 Inc. 15 series (1.5 in), from 80/20's dimensioned drawing of this profile; every slot, lip, cavity, bore and outline number is the drawing's\nCatalog version: 2026-10-20\n\nOverall (mm): width 76.2, height 76.2\n- 3030 T-slot extrusion, 3 × 3 in (15-series inch): 3 × 3 in, 8 slots on a 1.500 in = 38.100 mm pitch (80/20 Inc. 15 series (1.5 in)). Source: 80/20's dimensioned drawing of this profile. Files: STEP and STL at 100, 1000 mm and 6, 8, 10, 12, 15, 18, 20, 24, 30, 36, 42, 48, 60, 72 in with square ends, and a DXF of the exact cross-section (mm), the master to extrude to any length. The section is centred on the origin and extruded along +Z from z = 0.\n- Slot: opening 0.320 in = 8.128 mm, lip 0.160 in = 4.064 mm thick at the opening under a 2° drop-lock slope (0.169 in = 4.281 mm at the cavity wall), cavity 0.810 in = 20.574 mm wide under the lips, 0.484 in = 12.294 mm from the face to the cavity floor. Centre bore Ø0.262 in = 6.655 mm per cell (the largest thread whose tap drill fits inside: 5/16-18, 6.53 mm).\n- Cavity side walls: the cavity is 0.810 in = 20.574 mm wide under the lips, then follows the diagonal webs (0.160 in = 4.064 mm thick, stated) down to the floor; the webs lie on the cell diagonals (45°), as drawn.\n- The closed hollows between cells are not fully dimensioned on the drawing, so they are drawn filled: the outline, slots and bores are exact, the bar is heavier than the real one.\n- The drawing does not dimension the outer corner radii, so the corners are square: a pocket cut from this file clears the real rounded corners. The small alignment grooves on the faces are not dimensioned and are left off (the faces are flat).\n- Wrapping it: to make a part that fits around the bar, subtract the 1000 mm file (or extrude the DXF) from your solid; the outline is the drawing's 3 × 3 in with no allowance, so open the pocket by your process's socket fit (see Mating features).\n- Attachments: the 1.5 in 15-series T-nuts, end caps, feet, brackets, gussets, plates and slot covers are cut from these same numbers; the fit check (tools/asm_extrusion_fit.py) placed each one on this profile with zero overlap.\n\nfeature  size  from\noutline  3 × 3 in  drawing\nslot pitch  1.500 in = 38.100 mm  drawing\nslot opening  0.320 in = 8.128 mm  drawing\nlip thickness at the opening  0.160 in = 4.064 mm  drawing\nlip underside slope (drop lock)  2°  maker's page\ncavity width under the lips  0.810 in = 20.574 mm  drawing\nface to cavity floor  0.484 in = 12.294 mm  drawing\ncavity depth under the lip (at the cavity wall)  0.315 in = 8.012 mm  drawing\ncore between opposite floors  0.532 in = 13.513 mm  pitch − 2 × face-to-floor (drawing: 0.531 in)\ndiagonal web  0.160 in = 4.064 mm  drawing\ncentre bore  Ø0.262 in = 6.655 mm × 4  drawing\ncross-section area  3.212 in² (2072 mm²)  maker's page\nweight  0.3132 lb/in (3.758 lb/ft; 5.59 kg/m)  maker's page (ft and kg/m converted)\nIx / Iy  3.4133 / 3.4133 in⁴  maker's page\narea of this model's section  4387.5 mm² (6.801 in²)  computed from the DXF\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- 80/20 Inc.: 3030: 3.00 x 3.00 T-slotted profile, eight open T-slots: product page with the cross-section drawing and section properties — web — 80/20 site terms [verify license at link] — https://8020.net/3030.html\n- 80/20 Inc.: 3030 dimensioned cross-section drawing — image — 80/20 site terms [verify license at link] — https://8020.net/media/catalog/product/3/0/3030_dimensional.png\n\nFree files (CC BY 4.0, Xem Studio; STEP + STL, 16 parts): https://xemstudio.com/files/hardware/3030-t-slot-extrusion-inch/index.json\nAPI: https://xemstudio.com/api/geometry?object=3030-t-slot-extrusion-inch\n",
 "sources": [
  {
   "publisher": "80/20 Inc.",
   "title": "3030: 3.00 x 3.00 T-slotted profile, eight open T-slots: product page with the cross-section drawing and section properties",
   "url": "https://8020.net/3030.html",
   "formats": [
    "web"
   ],
   "license": "80/20 site terms",
   "license_verified": false,
   "hosted": false
  },
  {
   "publisher": "80/20 Inc.",
   "title": "3030 dimensioned cross-section drawing",
   "url": "https://8020.net/media/catalog/product/3/0/3030_dimensional.png",
   "formats": [
    "image"
   ],
   "license": "80/20 site terms",
   "license_verified": false,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "1515-t-slot-extrusion-inch",
  "1530-t-slot-extrusion-inch",
  "1545-t-slot-extrusion-inch",
  "3060-t-slot-extrusion-inch",
  "slide-in-t-nuts",
  "drop-in-t-nuts",
  "t-slot-end-caps",
  "t-slot-corner-brackets"
 ],
 "fits": [
  {
   "role": "Parts that fit it",
   "items": [
    {
     "slug": "slide-in-t-nuts",
     "why": "tongue in the opening, body in the cavity (slide)"
    },
    {
     "slug": "drop-in-t-nuts",
     "why": "drops through the opening, turns 90° in the cavity"
    },
    {
     "slug": "t-slot-corner-brackets",
     "why": "legs flat on two profile faces at 90°"
    },
    {
     "slug": "t-slot-gussets",
     "why": "legs on two profile faces in the inside corner"
    },
    {
     "slug": "t-slot-covers",
     "why": "stem in the slot opening, barb behind the lips"
    },
    {
     "slug": "t-slot-joining-plates",
     "why": "holes over the slot centrelines on the profile pitch"
    },
    {
     "slug": "t-slot-end-caps",
     "why": "end-cap-15in-2x2: pins in the centre bores (press)"
    }
   ]
  },
  {
   "role": "Alternatives",
   "items": [
    {
     "slug": "1515-t-slot-extrusion-inch",
     "why": "same 1.5 in 15-series slot, 1.5 × 1.5 in"
    },
    {
     "slug": "1530-t-slot-extrusion-inch",
     "why": "same 1.5 in 15-series slot, 1.5 × 3 in"
    },
    {
     "slug": "1545-t-slot-extrusion-inch",
     "why": "same 1.5 in 15-series slot, 1.5 × 4.5 in"
    }
   ]
  }
 ],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "slot opening",
   "exact": "0.320 in (8.13)",
   "mates": "T-nut tongue, slot-cover stem (1.5 in 15-series)",
   "fit": "slide",
   "files": "all"
  },
  {
   "feature": "slot cavity",
   "exact": "0.810 in (20.57) wide under the lips, face to floor 0.484 in (12.29), lip 0.160 in (4.06)",
   "mates": "T-nut body (slide-in, drop-in)",
   "fit": "slide",
   "files": "all"
  },
  {
   "feature": "centre bore",
   "exact": "Ø0.262 in (6.65)",
   "mates": "5/16-18 thread (tap drill 6.53); end-cap pin",
   "fit": "designed",
   "files": "all"
  },
  {
   "feature": "outline",
   "exact": "3 × 3 in, square corners",
   "mates": "end-cap outline, foot socket, a pocket that wraps the bar",
   "fit": "socket",
   "files": "all"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "What is the slot size of 3030 extrusion?",
   "a": "Opening 0.320 in = 8.128 mm, lip 0.160 in = 4.064 mm, cavity 0.810 in = 20.574 mm wide under the lips and 0.484 in = 12.294 mm deep from the face to the floor, per 80/20 Inc. 15 series (1.5 in)'s drawing."
  },
  {
   "q": "What T-nuts fit 3030 extrusion?",
   "a": "The 1.5 in 15-series nuts: slide-in (tnut-slide-15in-5-16-18, tnut-slide-15in-1-4-20) and drop-in versions, threaded 5/16-18, 1/4-20 as tap-drill holes, cut to this slot's exact space."
  },
  {
   "q": "Can I subtract this file to make a part that fits the extrusion exactly?",
   "a": "Yes: the outline is exactly 3 × 3 in with square corners (the real bar's corners are rounded, so the pocket clears them); extrude the DXF or subtract the 1000 mm STEP, then open the pocket by your fit."
  },
  {
   "q": "How heavy is 3030 extrusion?",
   "a": "0.3132 lb/in (3.758 lb/ft), 3.212 in² section, as 80/20 states. This model's section is larger because closed hollows / cavity details the drawing leaves undimensioned are drawn filled; use the stated weight, not the model's volume."
  },
  {
   "q": "What in this model is not taken straight from the drawing?",
   "a": "The closed hollows between cells are not fully dimensioned on the drawing, so they are drawn filled: the outline, slots and bores are exact, the bar is heavier than the real one. The drawing does not dimension the outer corner radii, so the corners are square: a pocket cut from this file clears the real rounded corners. Face grooves are left off."
  }
 ],
 "files_license": null,
 "offers": [
  {
   "file": "3030in-100",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/3030-t-slot-extrusion-inch/3030in-100.step",
   "stl": "https://xemstudio.com/files/hardware/3030-t-slot-extrusion-inch/3030in-100.stl",
   "note": "3030 T-slot extrusion, 3 × 3 in (15-series inch): 3 × 3 in section, 100 mm long, square ends; DXF = the exact cross-section in mm"
  },
  {
   "file": "3030in-1000",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/3030-t-slot-extrusion-inch/3030in-1000.step",
   "stl": "https://xemstudio.com/files/hardware/3030-t-slot-extrusion-inch/3030in-1000.stl",
   "note": "3030 T-slot extrusion, 3 × 3 in (15-series inch): 3 × 3 in section, 1000 mm long, square ends; DXF = the exact cross-section in mm"
  },
  {
   "file": "3030in-6in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/3030-t-slot-extrusion-inch/3030in-6in.step",
   "stl": "https://xemstudio.com/files/hardware/3030-t-slot-extrusion-inch/3030in-6in.stl",
   "note": "3030 T-slot extrusion, 3 × 3 in (15-series inch): 3 × 3 in section, 6 in (152.4 mm) long, square ends; DXF = the exact cross-section in mm"
  },
  {
   "file": "3030in-8in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/3030-t-slot-extrusion-inch/3030in-8in.step",
   "stl": "https://xemstudio.com/files/hardware/3030-t-slot-extrusion-inch/3030in-8in.stl",
   "note": "3030 T-slot extrusion, 3 × 3 in (15-series inch): 3 × 3 in section, 8 in (203.2 mm) long, square ends; DXF = the exact cross-section in mm"
  },
  {
   "file": "3030in-10in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/3030-t-slot-extrusion-inch/3030in-10in.step",
   "stl": "https://xemstudio.com/files/hardware/3030-t-slot-extrusion-inch/3030in-10in.stl",
   "note": "3030 T-slot extrusion, 3 × 3 in (15-series inch): 3 × 3 in section, 10 in (254 mm) long, square ends; DXF = the exact cross-section in mm"
  },
  {
   "file": "3030in-12in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/3030-t-slot-extrusion-inch/3030in-12in.step",
   "stl": "https://xemstudio.com/files/hardware/3030-t-slot-extrusion-inch/3030in-12in.stl",
   "note": "3030 T-slot extrusion, 3 × 3 in (15-series inch): 3 × 3 in section, 12 in (304.8 mm) long, square ends; DXF = the exact cross-section in mm"
  },
  {
   "file": "3030in-15in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/3030-t-slot-extrusion-inch/3030in-15in.step",
   "stl": "https://xemstudio.com/files/hardware/3030-t-slot-extrusion-inch/3030in-15in.stl",
   "note": "3030 T-slot extrusion, 3 × 3 in (15-series inch): 3 × 3 in section, 15 in (381 mm) long, square ends; DXF = the exact cross-section in mm"
  },
  {
   "file": "3030in-18in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/3030-t-slot-extrusion-inch/3030in-18in.step",
   "stl": "https://xemstudio.com/files/hardware/3030-t-slot-extrusion-inch/3030in-18in.stl",
   "note": "3030 T-slot extrusion, 3 × 3 in (15-series inch): 3 × 3 in section, 18 in (457.2 mm) long, square ends; DXF = the exact cross-section in mm"
  },
  {
   "file": "3030in-20in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/3030-t-slot-extrusion-inch/3030in-20in.step",
   "stl": "https://xemstudio.com/files/hardware/3030-t-slot-extrusion-inch/3030in-20in.stl",
   "note": "3030 T-slot extrusion, 3 × 3 in (15-series inch): 3 × 3 in section, 20 in (508 mm) long, square ends; DXF = the exact cross-section in mm"
  },
  {
   "file": "3030in-24in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/3030-t-slot-extrusion-inch/3030in-24in.step",
   "stl": "https://xemstudio.com/files/hardware/3030-t-slot-extrusion-inch/3030in-24in.stl",
   "note": "3030 T-slot extrusion, 3 × 3 in (15-series inch): 3 × 3 in section, 24 in (609.6 mm) long, square ends; DXF = the exact cross-section in mm"
  },
  {
   "file": "3030in-30in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/3030-t-slot-extrusion-inch/3030in-30in.step",
   "stl": "https://xemstudio.com/files/hardware/3030-t-slot-extrusion-inch/3030in-30in.stl",
   "note": "3030 T-slot extrusion, 3 × 3 in (15-series inch): 3 × 3 in section, 30 in (762 mm) long, square ends; DXF = the exact cross-section in mm"
  },
  {
   "file": "3030in-36in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/3030-t-slot-extrusion-inch/3030in-36in.step",
   "stl": "https://xemstudio.com/files/hardware/3030-t-slot-extrusion-inch/3030in-36in.stl",
   "note": "3030 T-slot extrusion, 3 × 3 in (15-series inch): 3 × 3 in section, 36 in (914.4 mm) long, square ends; DXF = the exact cross-section in mm"
  },
  {
   "file": "3030in-42in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/3030-t-slot-extrusion-inch/3030in-42in.step",
   "stl": "https://xemstudio.com/files/hardware/3030-t-slot-extrusion-inch/3030in-42in.stl",
   "note": "3030 T-slot extrusion, 3 × 3 in (15-series inch): 3 × 3 in section, 42 in (1066.8 mm) long, square ends; DXF = the exact cross-section in mm"
  },
  {
   "file": "3030in-48in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/3030-t-slot-extrusion-inch/3030in-48in.step",
   "stl": "https://xemstudio.com/files/hardware/3030-t-slot-extrusion-inch/3030in-48in.stl",
   "note": "3030 T-slot extrusion, 3 × 3 in (15-series inch): 3 × 3 in section, 48 in (1219.2 mm) long, square ends; DXF = the exact cross-section in mm"
  },
  {
   "file": "3030in-60in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/3030-t-slot-extrusion-inch/3030in-60in.step",
   "stl": "https://xemstudio.com/files/hardware/3030-t-slot-extrusion-inch/3030in-60in.stl",
   "note": "3030 T-slot extrusion, 3 × 3 in (15-series inch): 3 × 3 in section, 60 in (1524 mm) long, square ends; DXF = the exact cross-section in mm"
  },
  {
   "file": "3030in-72in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/3030-t-slot-extrusion-inch/3030in-72in.step",
   "stl": "https://xemstudio.com/files/hardware/3030-t-slot-extrusion-inch/3030in-72in.stl",
   "note": "3030 T-slot extrusion, 3 × 3 in (15-series inch): 3 × 3 in section, 72 in (1828.8 mm) long, square ends; DXF = the exact cross-section in mm"
  }
 ],
 "markdown": "https://xemstudio.com/objects/3030-t-slot-extrusion-inch/index.md"
}