{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "ag35-airfoil",
 "name": "AG35 airfoil (Drela AG series)",
 "kind": "standard",
 "category": "Airfoils",
 "group": "Other airfoils",
 "year": null,
 "question": "What are the AG35-AG38 airfoils?",
 "tags": [
  "airfoil",
  "wing section",
  "rc plane",
  "aerodynamics",
  "cambered airfoil"
 ],
 "aliases": [
  "ag35",
  "ag35 airfoil",
  "drela ag35",
  "ag series airfoil",
  "ag35 ag36 ag37 ag38",
  "bubble dancer airfoil",
  "rudder elevator spoiler glider airfoil",
  "drela airfoil",
  "ag35 coordinates",
  "res glider airfoil",
  "AG35 airfoil",
  "AG35 coordinates",
  "AG35 dat",
  "AG35 STEP",
  "AG35 STL",
  "AG35 profile"
 ],
 "overall_mm": {
  "length": 100,
  "width": 20,
  "height": 8.72
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": false,
 "free_files": 1,
 "url": "https://xemstudio.com/objects/ag35-airfoil/",
 "sheet_txt": "https://xemstudio.com/objects/ag35-airfoil/sheet.txt",
 "sheet": {
  "basis": "Coordinates from the UIUC Airfoil Coordinates Database; thickness, camber and section by Xem Studio",
  "overall_mm": {
   "length": 100,
   "width": 20,
   "height": 8.72
  },
  "notes": [
   "AG35-AG38 are Mark Drela's thin airfoils used across the wing of the Bubble Dancer 3 m RES sailplane, with ht21 for the tail surfaces (CRRC).",
   "The design combined the Allegro layout with 'some new thin airfoils' for easy building as a thermal glider that can still handle wind and winch launches; the model weighs about 31 oz with a sink rate of about 0.8 ft/s (CRRC).",
   "AG35: Mark Drela (AG series). Maximum thickness 8.72 % of chord at 27.9 % chord; maximum camber 4.37 % of chord at 26.6 % chord.",
   "Coordinates from the UIUC Airfoil Coordinates Database (M. Selig, UIUC Applied Aerodynamics Group), file ag35.dat, titled 'AG35'. Thickness and camber are computed by Xem Studio from those points (vertical distance at equal x, linear between points).",
   "The published trailing edge is open (0.249 % chord thick). As on the NACA pages, the file uses a single sharp trailing-edge point: each surface is shifted linearly from zero at the leading edge to meet at the mid point of the published trailing edge, a change of at most 0.124 % chord, at the trailing edge itself.",
   "The file is a 100 mm chord section, 20 mm deep: scale it uniformly to your chord, or import the STEP and sweep or loft it into a wing. Thickness scales with chord; the shape is the same at any size.",
   "Used on: Bubble Dancer (RC sailplane), Allegro-Lite (prototype wing)."
  ],
  "table": {
   "columns": [
    "parameter",
    "value",
    "source"
   ],
   "rows": [
    [
     "Max thickness",
     "8.72 % chord at 27.9 % chord",
     "computed from the UIUC coordinates"
    ],
    [
     "Max camber",
     "4.37 % chord at 26.6 % chord",
     "computed from the UIUC coordinates"
    ],
    [
     "Published points",
     "180 (92 upper, 89 lower, shared leading edge)",
     "UIUC coordinates"
    ],
    [
     "Trailing edge as published",
     "open, 0.249 % chord thick",
     "UIUC coordinates"
    ],
    [
     "y at x = 1.25 % chord",
     "upper +4.404 / lower +1.715 % chord",
     "linear between the published points (UIUC coordinates)"
    ],
    [
     "y at x = 2.5 % chord",
     "upper +5.151 / lower +1.359 % chord",
     "linear between the published points (UIUC coordinates)"
    ],
    [
     "y at x = 5 % chord",
     "upper +6.180 / lower +0.925 % chord",
     "linear between the published points (UIUC coordinates)"
    ],
    [
     "y at x = 7.5 % chord",
     "upper +6.896 / lower +0.648 % chord",
     "linear between the published points (UIUC coordinates)"
    ],
    [
     "y at x = 10 % chord",
     "upper +7.431 / lower +0.453 % chord",
     "linear between the published points (UIUC coordinates)"
    ],
    [
     "y at x = 15 % chord",
     "upper +8.139 / lower +0.205 % chord",
     "linear between the published points (UIUC coordinates)"
    ],
    [
     "y at x = 20 % chord",
     "upper +8.530 / lower +0.077 % chord",
     "linear between the published points (UIUC coordinates)"
    ],
    [
     "y at x = 25 % chord",
     "upper +8.706 / lower +0.018 % chord",
     "linear between the published points (UIUC coordinates)"
    ],
    [
     "y at x = 30 % chord",
     "upper +8.707 / lower +0.000 % chord",
     "linear between the published points (UIUC coordinates)"
    ],
    [
     "y at x = 40 % chord",
     "upper +8.260 / lower -0.000 % chord",
     "linear between the published points (UIUC coordinates)"
    ],
    [
     "y at x = 50 % chord",
     "upper +7.328 / lower -0.000 % chord",
     "linear between the published points (UIUC coordinates)"
    ],
    [
     "y at x = 60 % chord",
     "upper +6.282 / lower -0.000 % chord",
     "linear between the published points (UIUC coordinates)"
    ],
    [
     "y at x = 70 % chord",
     "upper +4.997 / lower -0.000 % chord",
     "linear between the published points (UIUC coordinates)"
    ],
    [
     "y at x = 80 % chord",
     "upper +3.489 / lower -0.000 % chord",
     "linear between the published points (UIUC coordinates)"
    ],
    [
     "y at x = 90 % chord",
     "upper +1.884 / lower -0.000 % chord",
     "linear between the published points (UIUC coordinates)"
    ],
    [
     "y at x = 95 % chord",
     "upper +1.067 / lower -0.000 % chord",
     "linear between the published points (UIUC coordinates)"
    ],
    [
     "Bubble Dancer wing airfoils",
     "ag35, ag36, ag37, ag38",
     "CRRC"
    ],
    [
     "Tail airfoil",
     "ht21",
     "CRRC"
    ],
    [
     "Span / area",
     "120 in / 1000 in^2",
     "CRRC"
    ],
    [
     "Weight / sink",
     "~31 oz (880 g) / ~0.8 ft/s",
     "CRRC"
    ],
    [
     "Coordinates source",
     "UIUC Airfoil Coordinates Database: ag35.dat ('AG35')",
     "UIUC Applied Aerodynamics Group (M. Selig)"
    ]
   ]
  }
 },
 "sheet_text": "AG35 airfoil (Drela AG series) — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/ag35-airfoil/  (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/)\nBasis: Coordinates from the UIUC Airfoil Coordinates Database; thickness, camber and section by Xem Studio\nCatalog version: 2026-10-20\n\nOverall (mm): length 100.0, width 20.0, height 8.72\n- AG35-AG38 are Mark Drela's thin airfoils used across the wing of the Bubble Dancer 3 m RES sailplane, with ht21 for the tail surfaces (CRRC).\n- The design combined the Allegro layout with 'some new thin airfoils' for easy building as a thermal glider that can still handle wind and winch launches; the model weighs about 31 oz with a sink rate of about 0.8 ft/s (CRRC).\n- AG35: Mark Drela (AG series). Maximum thickness 8.72 % of chord at 27.9 % chord; maximum camber 4.37 % of chord at 26.6 % chord.\n- Coordinates from the UIUC Airfoil Coordinates Database (M. Selig, UIUC Applied Aerodynamics Group), file ag35.dat, titled 'AG35'. Thickness and camber are computed by Xem Studio from those points (vertical distance at equal x, linear between points).\n- The published trailing edge is open (0.249 % chord thick). As on the NACA pages, the file uses a single sharp trailing-edge point: each surface is shifted linearly from zero at the leading edge to meet at the mid point of the published trailing edge, a change of at most 0.124 % chord, at the trailing edge itself.\n- The file is a 100 mm chord section, 20 mm deep: scale it uniformly to your chord, or import the STEP and sweep or loft it into a wing. Thickness scales with chord; the shape is the same at any size.\n- Used on: Bubble Dancer (RC sailplane), Allegro-Lite (prototype wing).\n\nparameter  value  source\nMax thickness  8.72 % chord at 27.9 % chord  computed from the UIUC coordinates\nMax camber  4.37 % chord at 26.6 % chord  computed from the UIUC coordinates\nPublished points  180 (92 upper, 89 lower, shared leading edge)  UIUC coordinates\nTrailing edge as published  open, 0.249 % chord thick  UIUC coordinates\ny at x = 1.25 % chord  upper +4.404 / lower +1.715 % chord  linear between the published points (UIUC coordinates)\ny at x = 2.5 % chord  upper +5.151 / lower +1.359 % chord  linear between the published points (UIUC coordinates)\ny at x = 5 % chord  upper +6.180 / lower +0.925 % chord  linear between the published points (UIUC coordinates)\ny at x = 7.5 % chord  upper +6.896 / lower +0.648 % chord  linear between the published points (UIUC coordinates)\ny at x = 10 % chord  upper +7.431 / lower +0.453 % chord  linear between the published points (UIUC coordinates)\ny at x = 15 % chord  upper +8.139 / lower +0.205 % chord  linear between the published points (UIUC coordinates)\ny at x = 20 % chord  upper +8.530 / lower +0.077 % chord  linear between the published points (UIUC coordinates)\ny at x = 25 % chord  upper +8.706 / lower +0.018 % chord  linear between the published points (UIUC coordinates)\ny at x = 30 % chord  upper +8.707 / lower +0.000 % chord  linear between the published points (UIUC coordinates)\ny at x = 40 % chord  upper +8.260 / lower -0.000 % chord  linear between the published points (UIUC coordinates)\ny at x = 50 % chord  upper +7.328 / lower -0.000 % chord  linear between the published points (UIUC coordinates)\ny at x = 60 % chord  upper +6.282 / lower -0.000 % chord  linear between the published points (UIUC coordinates)\ny at x = 70 % chord  upper +4.997 / lower -0.000 % chord  linear between the published points (UIUC coordinates)\ny at x = 80 % chord  upper +3.489 / lower -0.000 % chord  linear between the published points (UIUC coordinates)\ny at x = 90 % chord  upper +1.884 / lower -0.000 % chord  linear between the published points (UIUC coordinates)\ny at x = 95 % chord  upper +1.067 / lower -0.000 % chord  linear between the published points (UIUC coordinates)\nBubble Dancer wing airfoils  ag35, ag36, ag37, ag38  CRRC\nTail airfoil  ht21  CRRC\nSpan / area  120 in / 1000 in^2  CRRC\nWeight / sink  ~31 oz (880 g) / ~0.8 ft/s  CRRC\nCoordinates source  UIUC Airfoil Coordinates Database: ag35.dat ('AG35')  UIUC Applied Aerodynamics Group (M. Selig)\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- UIUC Applied Aerodynamics Group (M. Selig): UIUC Airfoil Coordinates Database: ag35.dat ('AG35') — web — UIUC Airfoil Coordinates Database, public research data; coordinates are facts, cited and linked, not rehosted — https://m-selig.ae.illinois.edu/ads/coord/ag35.dat\n- UIUC Applied Aerodynamics Group (M. Selig): UIUC Airfoil Coordinates Database (original: Mark Drela (AG series)) — web — UIUC Airfoil Coordinates Database, public research data; coordinates are facts, cited and linked, not rehosted — https://m-selig.ae.illinois.edu/ads/coord_database.html\n- Charles River Radio Controllers (M. Drela designs): Bubble Dancer 3m RES sailplane — web — Publisher's page; dimensions are facts — https://charlesriverrc.org/articles/on-line-plans/mark-drela-designs/bubble-dancer/\n\nFree files (Xem Studio Design License, Xem Studio; STEP + STL, 1 parts): https://xemstudio.com/files/hardware/ag35-airfoil/index.json\nAPI: https://xemstudio.com/api/geometry?object=ag35-airfoil\n",
 "sources": [
  {
   "publisher": "UIUC Applied Aerodynamics Group (M. Selig)",
   "title": "UIUC Airfoil Coordinates Database: ag35.dat ('AG35')",
   "url": "https://m-selig.ae.illinois.edu/ads/coord/ag35.dat",
   "formats": [
    "web"
   ],
   "license": "UIUC Airfoil Coordinates Database, public research data; coordinates are facts, cited and linked, not rehosted",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "UIUC Applied Aerodynamics Group (M. Selig)",
   "title": "UIUC Airfoil Coordinates Database (original: Mark Drela (AG series))",
   "url": "https://m-selig.ae.illinois.edu/ads/coord_database.html",
   "formats": [
    "web"
   ],
   "license": "UIUC Airfoil Coordinates Database, public research data; coordinates are facts, cited and linked, not rehosted",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Charles River Radio Controllers (M. Drela designs)",
   "title": "Bubble Dancer 3m RES sailplane",
   "url": "https://charlesriverrc.org/articles/on-line-plans/mark-drela-designs/bubble-dancer/",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "clark-y-airfoil",
  "eppler-e387-airfoil",
  "mh32-airfoil",
  "s7075-airfoil",
  "sd7037-airfoil",
  "sd7003-airfoil",
  "naca-2412-airfoil",
  "naca-0012-airfoil"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [],
 "faq": [
  {
   "q": "Where do AG35-AG38 go on the wing?",
   "a": "They are listed together for the Bubble Dancer wing; the page does not give spanwise stations (CRRC)."
  },
  {
   "q": "How thick is the AG35?",
   "a": "Maximum thickness 8.72 % of chord at 27.9 % chord: 8.72 mm on a 100 mm chord (computed from the UIUC coordinates)."
  },
  {
   "q": "How much camber does the AG35 have?",
   "a": "Maximum camber 4.37 % of chord at 26.6 % chord (computed from the UIUC coordinates)."
  },
  {
   "q": "How do I use it for my wing?",
   "a": "Scale the 100 mm section to your chord (e.g. 180 mm chord = 180 % scale), then extrude or loft between root and tip sections. For a tapered wing, scale a root and a tip copy and loft between them."
  }
 ],
 "files_license": {
  "name": "Xem Studio Design License",
  "holder": "Xem Studio",
  "url": "https://xemstudio.com/license/",
  "note": "Xem Studio's own design: free to use, print, modify and sell things made from it; not to be republished or redistributed as files."
 },
 "offers": [
  {
   "file": "ag35-airfoil-section-100mm-chord",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/ag35-airfoil/ag35-airfoil-section-100mm-chord.step",
   "stl": "https://xemstudio.com/files/hardware/ag35-airfoil/ag35-airfoil-section-100mm-chord.stl",
   "note": "AG35 section, 100 mm chord × 20 mm span, 179 points from the published coordinates, single trailing-edge point (scale to your chord)"
  }
 ],
 "markdown": "https://xemstudio.com/objects/ag35-airfoil/index.md"
}