{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "airpods-pro-3-case",
 "name": "AirPods Pro 3 case",
 "kind": "modern",
 "category": "Phones, tablets & wearables",
 "group": "Smartwatches & wearables",
 "year": 2024,
 "question": "What are the AirPods Pro 3 case dimensions?",
 "tags": [
  "airpods",
  "airpods pro 3 case",
  "apple",
  "case",
  "earbuds",
  "holder"
 ],
 "aliases": [
  "airpods pro 3 case size",
  "airpods pro 3 case measurements"
 ],
 "overall_mm": {
  "length": 47.22,
  "width": 62.22,
  "height": 21.84
 },
 "official_cad": true,
 "xem_status": "not-scanned",
 "les": false,
 "free_files": 0,
 "url": "https://xemstudio.com/objects/airpods-pro-3-case/",
 "sheet_txt": "https://xemstudio.com/objects/airpods-pro-3-case/sheet.txt",
 "sheet": {
  "basis": "Apple accessory dimensional drawing (developer.apple.com/accessories); numbers transcribed by Xem Studio",
  "overall_mm": {
   "length": 47.22,
   "width": 62.22,
   "height": 21.84
  },
  "notes": [
   "From Apple's dimensional drawing for MagSafe Charging Case for AirPods Pro 3 (footer; title block TITLE blank): the numbers below are as printed (Apple's drawing is linked, not copied). No body file: the drawing does not dimension the outline fully enough to build a true shape without guessing.",
   "Apple's notes for accessory makers: Note 1: ACCESSORIES INTRUDING INTO SHADED REGION(S) WILL NEGATIVELY AFFECT PRODUCT PERFORMANCE.; 2 TO ENSURE FULL FUNCTIONALITY, DO NOT OBSTRUCT THIS AREA WITH METAL OR OTHER CONDUCTIVE MATERIAL.; 3 TO ENSURE FULL FUNCTIONALITY WITH MINIMAL IMPACT TO QI CHARGING PERFORMANCE, MINIMIZE ANY MATERIAL THICKNESS.; 4 TO ENABLE CHARGING VIA APPLE WATCH CHARGER, IT IS RECOMMENDED THERE BE NO MATERIAL BETWEEN BACK OF DEVICE AND WATCH CHARGER.; 5 PROTECTIVE CASES OR COVERS MAY DETUNE OR IMPACT RF & WIRELESS CHARGING PERFORMANCE. IMPACT IS HIGHLY DEPENDENT ON MATERIAL AND MATERIAL THICKNESS. HIGHLY RECOMM",
   "AirPods Pro 3 case: 45.2 × 60.6 × 21.7 mm (height × width × depth), 1.78 × 2.39 × 0.85 in, 50.8 g, 0 in display.",
   "AirPods 4 case: 46.2 × 50.1 × 21.2 mm, 32.3 g with buds (the smallest). AirPods (3rd gen) case: 46.4 × 54.4 × 21.4 mm, 37.9 g.",
   "Case holders: hinge is on the top; the lid needs 25 mm of swing clearance; MagSafe-compatible cases centre a Ø18 mm magnet ring on the back.",
   "Compare with the rest of the family on the AirPods Pro 2 / Pro 3, AirPods 4 and AirPods 3 charging cases sheet."
  ],
  "table": {
   "columns": [
    "parameter",
    "value"
   ],
   "rows": [
    [
     "width × length × thickness",
     "62.22 × 47.22 × 21.84 mm"
    ],
    [
     "overall (as printed)",
     "62.22 PRODUCT LENGTH"
    ],
    [
     "overall (as printed)",
     "47.22 PRODUCT HEIGHT"
    ],
    [
     "overall (as printed)",
     "21.84 PRODUCT THICKNESS"
    ],
    [
     "overall (as printed)",
     "[1] 62.22 (open view)"
    ],
    [
     "overall (as printed)",
     "[1] 62.07 (open, lid seam width)"
    ],
    [
     "overall (as printed)",
     "[1] 19.64 (open case base height)"
    ],
    [
     "LED (front)",
     "[1] LED OUTER DIAMETER = Ø0.80, Ø2.80 RECOMMENDED MINIMUM KEEPOUT, DO NOT OBSTRUCT LED; 26.31 bottom edge to LED centre; 31.11 left edge to LED centre"
    ],
    [
     "lid",
     "115.00° NOMINAL; 47.10 LID CLEARANCE SCOOP (section A-A); [1] hinge keep-out"
    ],
    [
     "lanyard loop (side)",
     "[1] 4.16 top edge to keep-out, [1] 9.08 keep-out height, [1] 4.47 keep-out width; DETAIL B 2X Ø3.47, 4.67 pitch; SECTION C-C LANYARD LOOP INTERNAL DIMENSIONS 2.80 x 2.00"
    ],
    [
     "hinge keep-out (back)",
     "[1] 49.70 RECOMMENDED MINIMUM KEEPOUT VARIES DEPENDING ON ACCESSORY'S MATERIAL THICKNESS; [1] 1.00; [1] 7.90 RECOMMENDED MINIMUM KEEPOUT VARIES..."
    ],
    [
     "Apple Watch charger keep-out (back)",
     "[4] Ø28.62 RECOMMENDED MINIMUM KEEPOUT, MATERIAL IN SPECIFIED AREA MAY DISABLE WATCH CHARGING FEATURE; centre 16.76 above bottom, 31.11 from right edge"
    ],
    [
     "bottom (port side)",
     "[1] 12.46 RECOMMENDED MINIMUM KEEPOUT x [1] 6.60; [1] Ø3.45 RECOMMENDED PORT HOLE KEEPOUT; [1] 7.66 x [1] 3.35 RECOMMENDED SPEAKER HOLE CUTOUT; [3] 1.00 RECOMMENDED DISTANCE TO QI WIRELESS CHARGER, SH"
    ],
    [
     "wireless charging keep-out (back)",
     "[2] 52.22 wide x 37.22 high, 5.00 from top edge, 5.00 from right edge"
    ],
    [
     "RF antenna keep-outs",
     "[5] 21.23 high x [5] 15.20 wide at lower corners"
    ],
    [
     "button",
     "none shown on back view"
    ]
   ]
  }
 },
 "sheet_text": "AirPods Pro 3 case — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/airpods-pro-3-case/  (sheet CC BY 4.0)\nBasis: Apple accessory dimensional drawing (developer.apple.com/accessories); numbers transcribed by Xem Studio\nCatalog version: 2026-10-20\n\nOverall (mm): length 47.22, width 62.22, height 21.84\n- From Apple's dimensional drawing for MagSafe Charging Case for AirPods Pro 3 (footer; title block TITLE blank): the numbers below are as printed (Apple's drawing is linked, not copied). No body file: the drawing does not dimension the outline fully enough to build a true shape without guessing.\n- Apple's notes for accessory makers: Note 1: ACCESSORIES INTRUDING INTO SHADED REGION(S) WILL NEGATIVELY AFFECT PRODUCT PERFORMANCE.; 2 TO ENSURE FULL FUNCTIONALITY, DO NOT OBSTRUCT THIS AREA WITH METAL OR OTHER CONDUCTIVE MATERIAL.; 3 TO ENSURE FULL FUNCTIONALITY WITH MINIMAL IMPACT TO QI CHARGING PERFORMANCE, MINIMIZE ANY MATERIAL THICKNESS.; 4 TO ENABLE CHARGING VIA APPLE WATCH CHARGER, IT IS RECOMMENDED THERE BE NO MATERIAL BETWEEN BACK OF DEVICE AND WATCH CHARGER.; 5 PROTECTIVE CASES OR COVERS MAY DETUNE OR IMPACT RF & WIRELESS CHARGING PERFORMANCE. IMPACT IS HIGHLY DEPENDENT ON MATERIAL AND MATERIAL THICKNESS. HIGHLY RECOMM\n- AirPods Pro 3 case: 45.2 × 60.6 × 21.7 mm (height × width × depth), 1.78 × 2.39 × 0.85 in, 50.8 g, 0 in display.\n- AirPods 4 case: 46.2 × 50.1 × 21.2 mm, 32.3 g with buds (the smallest). AirPods (3rd gen) case: 46.4 × 54.4 × 21.4 mm, 37.9 g.\n- Case holders: hinge is on the top; the lid needs 25 mm of swing clearance; MagSafe-compatible cases centre a Ø18 mm magnet ring on the back.\n- Compare with the rest of the family on the AirPods Pro 2 / Pro 3, AirPods 4 and AirPods 3 charging cases sheet.\n\nparameter  value\nwidth × length × thickness  62.22 × 47.22 × 21.84 mm\noverall (as printed)  62.22 PRODUCT LENGTH\noverall (as printed)  47.22 PRODUCT HEIGHT\noverall (as printed)  21.84 PRODUCT THICKNESS\noverall (as printed)  [1] 62.22 (open view)\noverall (as printed)  [1] 62.07 (open, lid seam width)\noverall (as printed)  [1] 19.64 (open case base height)\nLED (front)  [1] LED OUTER DIAMETER = Ø0.80, Ø2.80 RECOMMENDED MINIMUM KEEPOUT, DO NOT OBSTRUCT LED; 26.31 bottom edge to LED centre; 31.11 left edge to LED centre\nlid  115.00° NOMINAL; 47.10 LID CLEARANCE SCOOP (section A-A); [1] hinge keep-out\nlanyard loop (side)  [1] 4.16 top edge to keep-out, [1] 9.08 keep-out height, [1] 4.47 keep-out width; DETAIL B 2X Ø3.47, 4.67 pitch; SECTION C-C LANYARD LOOP INTERNAL DIMENSIONS 2.80 x 2.00\nhinge keep-out (back)  [1] 49.70 RECOMMENDED MINIMUM KEEPOUT VARIES DEPENDING ON ACCESSORY'S MATERIAL THICKNESS; [1] 1.00; [1] 7.90 RECOMMENDED MINIMUM KEEPOUT VARIES...\nApple Watch charger keep-out (back)  [4] Ø28.62 RECOMMENDED MINIMUM KEEPOUT, MATERIAL IN SPECIFIED AREA MAY DISABLE WATCH CHARGING FEATURE; centre 16.76 above bottom, 31.11 from right edge\nbottom (port side)  [1] 12.46 RECOMMENDED MINIMUM KEEPOUT x [1] 6.60; [1] Ø3.45 RECOMMENDED PORT HOLE KEEPOUT; [1] 7.66 x [1] 3.35 RECOMMENDED SPEAKER HOLE CUTOUT; [3] 1.00 RECOMMENDED DISTANCE TO QI WIRELESS CHARGER, SH\nwireless charging keep-out (back)  [2] 52.22 wide x 37.22 high, 5.00 from top edge, 5.00 from right edge\nRF antenna keep-outs  [5] 21.23 high x [5] 15.20 wide at lower corners\nbutton  none shown on back view\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- Apple (official): AirPods Pro 2 tech specs — web — Manufacturer spec page — https://support.apple.com/en-us/111851\n- Apple (official): AirPods 4 tech specs — web — Manufacturer spec page — https://support.apple.com/en-us/121203\n- Apple (official): Accessory Design Guidelines for Apple Devices (dimensioned drawings of every current device) — PDF — Apple developer terms; drawings for accessory design — https://developer.apple.com/accessories/Accessory-Design-Guidelines.pdf\n- Apple: MagSafe Charging Case for AirPods Pro 3 (footer; title block TITLE blank) dimensional drawing (Accessory Design Guidelines) — PDF — Apple's terms; linked, not hosted — https://developer.apple.com/download/files/accessories/dimensional-drawings/magsafe-charging-case-for-airpods-pro-3.pdf\n\nNo true-size file yet: the published figures do not fix the whole shape; a measured scan is planned.\nAPI: https://xemstudio.com/api/geometry?object=airpods-pro-3-case\n",
 "sources": [
  {
   "publisher": "Apple (official)",
   "title": "AirPods Pro 2 tech specs",
   "url": "https://support.apple.com/en-us/111851",
   "formats": [
    "web"
   ],
   "license": "Manufacturer spec page",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Apple (official)",
   "title": "AirPods 4 tech specs",
   "url": "https://support.apple.com/en-us/121203",
   "formats": [
    "web"
   ],
   "license": "Manufacturer spec page",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Apple (official)",
   "title": "Accessory Design Guidelines for Apple Devices (dimensioned drawings of every current device)",
   "url": "https://developer.apple.com/accessories/Accessory-Design-Guidelines.pdf",
   "formats": [
    "PDF"
   ],
   "license": "Apple developer terms; drawings for accessory design",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Apple",
   "title": "MagSafe Charging Case for AirPods Pro 3 (footer; title block TITLE blank) dimensional drawing (Accessory Design Guidelines)",
   "url": "https://developer.apple.com/download/files/accessories/dimensional-drawings/magsafe-charging-case-for-airpods-pro-3.pdf",
   "formats": [
    "PDF"
   ],
   "license": "Apple's terms; linked, not hosted",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "not-scanned",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "airpods-pro-2-case",
  "airpods-4-case",
  "airpods-3-case"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [],
 "faq": [
  {
   "q": "How big is the AirPods Pro 3 case in inches?",
   "a": "1.78 × 2.39 × 0.85 in (height × width × depth); 45.2 × 60.6 × 21.7 mm."
  },
  {
   "q": "What are the AirPods Pro 3 case dimensions in mm?",
   "a": "45.2 × 60.6 × 21.7 mm, 50.8 g."
  }
 ],
 "files_license": null,
 "offers": [],
 "markdown": "https://xemstudio.com/objects/airpods-pro-3-case/index.md"
}