{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "axial-fan-frames",
 "name": "Axial fans, 25 to 140 mm: frames and hole patterns",
 "kind": "hardware",
 "category": "Electronic components",
 "group": "Fans",
 "year": null,
 "question": "What is the screw hole spacing for 80 mm, 92 mm and 140 mm fans?",
 "tags": [
  "fan",
  "cooling",
  "duct",
  "hole pattern"
 ],
 "aliases": [
  "80mm fan",
  "92mm fan",
  "140mm fan",
  "60mm fan",
  "30mm fan",
  "fan screw spacing",
  "fan hole pattern"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": false,
 "free_files": 12,
 "url": "https://xemstudio.com/objects/axial-fan-frames/",
 "sheet_txt": "https://xemstudio.com/objects/axial-fan-frames/sheet.txt",
 "sheet": {
  "basis": "Industry-standard square axial fan frames (hole pattern = frame − 8 mm for 40 mm and larger except 140, which uses 124.5)",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "Hole patterns: 25→20, 30→24, 40→32, 50→40, 60→50, 70→61.5, 80→71.5, 92→82.5, 120→105, 140→124.5 mm. Holes Ø4.3 from 50 mm up, Ø3.5 (M3) for 40 and Ø2.9 (M2.5) for 25/30.",
   "Thickness: 10 mm for 25–40, 15 for 50–70, 25 for 80–140 (15 mm slim 120s exist; 4020 is a 20 mm 40). Airflow arrows are moulded on the frame side.",
   "The files are the exact frame envelope (outer size, hole pattern, holes) with a solid hub, so a grille or duct can be checked against it; a duct that wraps the frame takes the frame size exactly (see Mating features)."
  ],
  "table": {
   "columns": [
    "frame_mm",
    "hole_pattern_mm",
    "hole_dia_mm",
    "thickness_mm"
   ],
   "rows": [
    [
     25,
     20,
     2.9,
     10
    ],
    [
     30,
     24,
     2.9,
     10
    ],
    [
     40,
     32,
     3.5,
     10
    ],
    [
     50,
     40,
     4.3,
     15
    ],
    [
     60,
     50,
     4.3,
     15
    ],
    [
     70,
     61.5,
     4.3,
     15
    ],
    [
     80,
     71.5,
     4.3,
     25
    ],
    [
     92,
     82.5,
     4.3,
     25
    ],
    [
     120,
     105,
     4.3,
     25
    ],
    [
     140,
     124.5,
     4.3,
     25
    ]
   ]
  }
 },
 "sheet_text": "Axial fans, 25 to 140 mm: frames and hole patterns — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/axial-fan-frames/  (sheet CC BY 4.0)\nBasis: Industry-standard square axial fan frames (hole pattern = frame − 8 mm for 40 mm and larger except 140, which uses 124.5)\nCatalog version: 2026-10-20\n\nSizes: see table below\n- Hole patterns: 25→20, 30→24, 40→32, 50→40, 60→50, 70→61.5, 80→71.5, 92→82.5, 120→105, 140→124.5 mm. Holes Ø4.3 from 50 mm up, Ø3.5 (M3) for 40 and Ø2.9 (M2.5) for 25/30.\n- Thickness: 10 mm for 25–40, 15 for 50–70, 25 for 80–140 (15 mm slim 120s exist; 4020 is a 20 mm 40). Airflow arrows are moulded on the frame side.\n- The files are the exact frame envelope (outer size, hole pattern, holes) with a solid hub, so a grille or duct can be checked against it; a duct that wraps the frame takes the frame size exactly (see Mating features).\n\nframe_mm  hole_pattern_mm  hole_dia_mm  thickness_mm\n25  20  2.9  10\n30  24  2.9  10\n40  32  3.5  10\n50  40  4.3  15\n60  50  4.3  15\n70  61.5  4.3  15\n80  71.5  4.3  25\n92  82.5  4.3  25\n120  105  4.3  25\n140  124.5  4.3  25\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- Wikipedia: Computer fan — web — CC BY-SA 4.0 (text) — https://en.wikipedia.org/wiki/Computer_fan\n- McMaster-Carr: Equipment-cooling fans (free STEP/IGES/STL per part, for your own design use; no redistribution) — STEP, IGES, STL, PDF — McMaster-Carr site terms: personal design use, no redistribution [verify license at link] — https://www.mcmaster.com/products/equipment-cooling-fans/\n\nFree files (CC BY 4.0, Xem Studio; STEP + STL, 12 parts): https://xemstudio.com/files/hardware/axial-fan-frames/index.json\nAPI: https://xemstudio.com/api/geometry?object=axial-fan-frames\n",
 "sources": [
  {
   "publisher": "Wikipedia",
   "title": "Computer fan",
   "url": "https://en.wikipedia.org/wiki/Computer_fan",
   "formats": [
    "web"
   ],
   "license": "CC BY-SA 4.0 (text)",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "McMaster-Carr",
   "title": "Equipment-cooling fans (free STEP/IGES/STL per part, for your own design use; no redistribution)",
   "url": "https://www.mcmaster.com/products/equipment-cooling-fans/",
   "formats": [
    "STEP",
    "IGES",
    "STL",
    "PDF"
   ],
   "license": "McMaster-Carr site terms: personal design use, no redistribution",
   "license_verified": false,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "40mm-fan",
  "120mm-fan",
  "socket-head-cap-screws-metric",
  "raspberry-pi-5"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "frame",
   "exact": "size × size × t",
   "mates": "duct or grille pocket",
   "fit": "slide",
   "files": "fan-"
  },
  {
   "feature": "holes",
   "exact": "Ø2.9 / 3.5 / 4.3",
   "mates": "fan screws",
   "fit": "designed",
   "files": "fan-"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "What is the 80 mm fan screw spacing?",
   "a": "71.5 × 71.5 mm, Ø4.3 holes, 25 mm thick standard."
  },
  {
   "q": "What is the 140 mm fan hole spacing?",
   "a": "124.5 × 124.5 mm (some 140s also carry the 120 mm 105 × 105 pattern). Ø4.3 holes, 25 mm thick."
  },
  {
   "q": "What is the 30 mm fan hole spacing?",
   "a": "24 × 24 mm, Ø2.9 holes (M2.5); 25 mm fans use 20 × 20. Both 10 mm thick (3010, 2510)."
  },
  {
   "q": "What is the 60 mm fan hole spacing?",
   "a": "50 × 50 mm, Ø4.3 holes; 15 or 25 mm thick."
  }
 ],
 "files_license": null,
 "offers": [
  {
   "file": "fan-25x10",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/axial-fan-frames/fan-25x10.step",
   "stl": "https://xemstudio.com/files/hardware/axial-fan-frames/fan-25x10.stl",
   "note": "25 mm frame, 20 mm hole pattern, Ø2.9 holes, 10 thick"
  },
  {
   "file": "fan-30x10",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/axial-fan-frames/fan-30x10.step",
   "stl": "https://xemstudio.com/files/hardware/axial-fan-frames/fan-30x10.stl",
   "note": "30 mm frame, 24 mm hole pattern, Ø2.9 holes, 10 thick"
  },
  {
   "file": "fan-40x10",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/axial-fan-frames/fan-40x10.step",
   "stl": "https://xemstudio.com/files/hardware/axial-fan-frames/fan-40x10.stl",
   "note": "40 mm frame, 32 mm hole pattern, Ø3.5 holes, 10 thick"
  },
  {
   "file": "fan-50x15",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/axial-fan-frames/fan-50x15.step",
   "stl": "https://xemstudio.com/files/hardware/axial-fan-frames/fan-50x15.stl",
   "note": "50 mm frame, 40 mm hole pattern, Ø4.3 holes, 15 thick"
  },
  {
   "file": "fan-60x15",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/axial-fan-frames/fan-60x15.step",
   "stl": "https://xemstudio.com/files/hardware/axial-fan-frames/fan-60x15.stl",
   "note": "60 mm frame, 50 mm hole pattern, Ø4.3 holes, 15 thick"
  },
  {
   "file": "fan-70x15",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/axial-fan-frames/fan-70x15.step",
   "stl": "https://xemstudio.com/files/hardware/axial-fan-frames/fan-70x15.stl",
   "note": "70 mm frame, 61.5 mm hole pattern, Ø4.3 holes, 15 thick"
  },
  {
   "file": "fan-80x25",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/axial-fan-frames/fan-80x25.step",
   "stl": "https://xemstudio.com/files/hardware/axial-fan-frames/fan-80x25.stl",
   "note": "80 mm frame, 71.5 mm hole pattern, Ø4.3 holes, 25 thick"
  },
  {
   "file": "fan-92x25",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/axial-fan-frames/fan-92x25.step",
   "stl": "https://xemstudio.com/files/hardware/axial-fan-frames/fan-92x25.stl",
   "note": "92 mm frame, 82.5 mm hole pattern, Ø4.3 holes, 25 thick"
  },
  {
   "file": "fan-120x25",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/axial-fan-frames/fan-120x25.step",
   "stl": "https://xemstudio.com/files/hardware/axial-fan-frames/fan-120x25.stl",
   "note": "120 mm frame, 105 mm hole pattern, Ø4.3 holes, 25 thick"
  },
  {
   "file": "fan-140x25",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/axial-fan-frames/fan-140x25.step",
   "stl": "https://xemstudio.com/files/hardware/axial-fan-frames/fan-140x25.stl",
   "note": "140 mm frame, 124.5 mm hole pattern, Ø4.3 holes, 25 thick"
  },
  {
   "file": "fan-40x20",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/axial-fan-frames/fan-40x20.step",
   "stl": "https://xemstudio.com/files/hardware/axial-fan-frames/fan-40x20.stl",
   "note": "40 × 40 × 20 (4020)"
  },
  {
   "file": "fan-120x15",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/axial-fan-frames/fan-120x15.step",
   "stl": "https://xemstudio.com/files/hardware/axial-fan-frames/fan-120x15.stl",
   "note": "120 × 120 × 15 slim"
  }
 ],
 "markdown": "https://xemstudio.com/objects/axial-fan-frames/index.md"
}