{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "built-up-crank-webs-8mm",
 "name": "Built-up crank webs for Ø8 shafts and Ø6 crank pins (two-throw cranks at 90°)",
 "kind": "hardware",
 "category": "Hardware",
 "group": "Gears, cranks & flywheels",
 "year": null,
 "question": "How do I build a two-throw crankshaft with ball-bearing con-rods?",
 "tags": [
  "crank",
  "crank web",
  "crankshaft",
  "tri-clamp",
  "stirling",
  "long earth society"
 ],
 "aliases": [
  "built up crankshaft",
  "crank web 8 mm shaft"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": true,
 "free_files": 8,
 "url": "https://xemstudio.com/objects/built-up-crank-webs-8mm/",
 "sheet_txt": "https://xemstudio.com/objects/built-up-crank-webs-8mm/sheet.txt",
 "sheet": {
  "basis": "Design values; Ø6 dowel crank pins (ISO 8734)",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "Discs pressed on Ø8 shafts with Ø6 dowel crank pins pressed through them: the horizontal gamma's crank has four webs (two throws, 76.2 mm apart, a shaft between) and the beta's has two webs and a link web between the two con-rods (the shaft does not pass the con-rods).",
   "Pin radius 15 for the displacer (30 stroke) and 18 for the piston (36 stroke); the pins are a quarter turn apart, the displacer leading."
  ],
  "table": {
   "columns": [
    "part",
    "thickness",
    "pin radius"
   ],
   "rows": [
    [
     "crank-web-56x10-r15",
     "10",
     15
    ],
    [
     "crank-web-56x11-r15",
     "11",
     15
    ],
    [
     "crank-web-56x11-r18",
     "11",
     18
    ],
    [
     "crank-web-56x10-r18",
     "10",
     18
    ],
    [
     "crank-web-56x8-r18",
     "8",
     18
    ],
    [
     "crank-web-56x8-r15",
     "8",
     15
    ],
    [
     "link-web-14-r18-r15-90",
     14,
     "18 / 15"
    ]
   ]
  }
 },
 "sheet_text": "Built-up crank webs for Ø8 shafts and Ø6 crank pins (two-throw cranks at 90°) — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/built-up-crank-webs-8mm/  (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/)\nBasis: Design values; Ø6 dowel crank pins (ISO 8734)\nCatalog version: 2026-10-20\n\nSizes: see table below\n- Discs pressed on Ø8 shafts with Ø6 dowel crank pins pressed through them: the horizontal gamma's crank has four webs (two throws, 76.2 mm apart, a shaft between) and the beta's has two webs and a link web between the two con-rods (the shaft does not pass the con-rods).\n- Pin radius 15 for the displacer (30 stroke) and 18 for the piston (36 stroke); the pins are a quarter turn apart, the displacer leading.\n\npart  thickness  pin radius\ncrank-web-56x10-r15  10  15\ncrank-web-56x11-r15  11  15\ncrank-web-56x11-r18  11  18\ncrank-web-56x10-r18  10  18\ncrank-web-56x8-r18  8  18\ncrank-web-56x8-r15  8  15\nlink-web-14-r18-r15-90  14  18 / 15\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- Long Earth Society: Engine builds — web, video — LES site — https://longearthsociety.com/engineering/\n\nFree files (Xem Studio Design License, Xem Studio; STEP + STL, 8 parts): https://xemstudio.com/files/hardware/built-up-crank-webs-8mm/index.json\nAPI: https://xemstudio.com/api/geometry?object=built-up-crank-webs-8mm\n",
 "sources": [
  {
   "publisher": "Long Earth Society",
   "title": "Engine builds",
   "url": "https://longearthsociety.com/engineering/",
   "formats": [
    "web",
    "video"
   ],
   "license": "LES site",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "con-rods-626-625",
  "precision-rods-and-crank-shafts"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "shaft hole",
   "exact": "Ø8",
   "mates": "Ø8 crank shaft",
   "fit": "press",
   "files": "crank-web"
  },
  {
   "feature": "pin holes",
   "exact": "Ø6",
   "mates": "Ø6 dowel crank pins",
   "fit": "press",
   "files": "all"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "Which way does it turn?",
   "a": "The way that brings the displacer pin to each point a quarter turn before the piston pin."
  }
 ],
 "files_license": {
  "name": "Xem Studio Design License",
  "holder": "Xem Studio",
  "url": "https://xemstudio.com/license/",
  "note": "Xem Studio's own design: free to use, print, modify and sell things made from it; not to be republished or redistributed as files."
 },
 "offers": [
  {
   "file": "crank-web-56x10-r15",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/built-up-crank-webs-8mm/crank-web-56x10-r15.step",
   "stl": "https://xemstudio.com/files/hardware/built-up-crank-webs-8mm/crank-web-56x10-r15.stl",
   "note": "crank web Ø56 × 10: Ø8 shaft hole, Ø6 pin hole at r 15 (both press), two Ø11 lightening holes beside the pin (counterweight)"
  },
  {
   "file": "crank-web-56x11-r15",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/built-up-crank-webs-8mm/crank-web-56x11-r15.step",
   "stl": "https://xemstudio.com/files/hardware/built-up-crank-webs-8mm/crank-web-56x11-r15.stl",
   "note": "crank web Ø56 × 11: Ø8 shaft hole, Ø6 pin hole at r 15 (both press), two Ø11 lightening holes beside the pin (counterweight)"
  },
  {
   "file": "crank-web-56x11-r18",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/built-up-crank-webs-8mm/crank-web-56x11-r18.step",
   "stl": "https://xemstudio.com/files/hardware/built-up-crank-webs-8mm/crank-web-56x11-r18.stl",
   "note": "crank web Ø56 × 11: Ø8 shaft hole, Ø6 pin hole at r 18 (both press), two Ø11 lightening holes beside the pin (counterweight)"
  },
  {
   "file": "crank-web-56x10-r18",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/built-up-crank-webs-8mm/crank-web-56x10-r18.step",
   "stl": "https://xemstudio.com/files/hardware/built-up-crank-webs-8mm/crank-web-56x10-r18.stl",
   "note": "crank web Ø56 × 10: Ø8 shaft hole, Ø6 pin hole at r 18 (both press), two Ø11 lightening holes beside the pin (counterweight)"
  },
  {
   "file": "crank-web-56x8-r18",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/built-up-crank-webs-8mm/crank-web-56x8-r18.step",
   "stl": "https://xemstudio.com/files/hardware/built-up-crank-webs-8mm/crank-web-56x8-r18.stl",
   "note": "crank web Ø56 × 8: Ø8 shaft hole, Ø6 pin hole at r 18 (both press), two Ø11 lightening holes beside the pin (counterweight)"
  },
  {
   "file": "crank-web-56x8-r15",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/built-up-crank-webs-8mm/crank-web-56x8-r15.step",
   "stl": "https://xemstudio.com/files/hardware/built-up-crank-webs-8mm/crank-web-56x8-r15.stl",
   "note": "crank web Ø56 × 8: Ø8 shaft hole, Ø6 pin hole at r 15 (both press), two Ø11 lightening holes beside the pin (counterweight)"
  },
  {
   "file": "crank-web-56x12-r15",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/built-up-crank-webs-8mm/crank-web-56x12-r15.step",
   "stl": "https://xemstudio.com/files/hardware/built-up-crank-webs-8mm/crank-web-56x12-r15.stl",
   "note": "crank web Ø56 × 12: Ø8 shaft hole, Ø6 pin hole at r 15 (both press), two Ø11 lightening holes beside the pin (counterweight)"
  },
  {
   "file": "link-web-14-r18-r15-90",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/built-up-crank-webs-8mm/link-web-14-r18-r15-90.step",
   "stl": "https://xemstudio.com/files/hardware/built-up-crank-webs-8mm/link-web-14-r18-r15-90.stl",
   "note": "link web 14 thick: Ø6 press holes for the piston pin (r 18) and the displacer pin (r 15, 90° on)"
  }
 ],
 "markdown": "https://xemstudio.com/objects/built-up-crank-webs-8mm/index.md"
}