{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "buzzers-tht",
 "name": "Buzzers and beepers: 12 mm, 15 mm magnetic; TDK PS1240 piezo",
 "kind": "standard",
 "category": "Electronic components",
 "group": "Switches, relays & indicators",
 "year": null,
 "question": "What are the dimensions of a 12 mm buzzer?",
 "tags": [
  "buzzer",
  "beeper",
  "piezo",
  "pcb"
 ],
 "aliases": [
  "12mm buzzer dimensions",
  "buzzer pin spacing",
  "ps1240",
  "magnetic buzzer size",
  "active buzzer"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": false,
 "free_files": 7,
 "url": "https://xemstudio.com/objects/buzzers-tht/",
 "sheet_txt": "https://xemstudio.com/objects/buzzers-tht/sheet.txt",
 "sheet": {
  "basis": "KiCad 3D models of common PCB buzzers (12 × 9.5 mm and 15 × 7.5 mm magnetic with 7.6 mm pin spacing; TDK PS1240 12 mm piezo; CUI CST-931)",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "12 mm magnetic buzzer (the black cylinder on Arduino kits): Ø12 × 9.5 mm, pins 7.6 mm apart, sound hole on top; needs a Ø3–4 mm hole in the case within 2 mm of the port.",
   "15 mm: Ø15 × 7.5 mm, same 7.6 mm pitch. TDK PS1240 piezo: Ø12.2 × 6.5 mm, 5 mm pitch; passive, drive with a square wave.",
   "A printed resonant chamber (Ø12 cavity 3 mm deep over the port, exiting through a Ø2.5 hole) makes a 12 mm buzzer noticeably louder."
  ],
  "table": {
   "columns": [
    "part",
    "bbox_l_mm",
    "bbox_w_mm",
    "bbox_h_mm"
   ],
   "rows": [
    [
     "12x9.5rm7.6",
     12.5,
     12,
     12
    ],
    [
     "15x7.5rm7.6",
     15,
     15,
     10.5
    ],
    [
     "mallory-ast1109mltrq",
     15,
     9,
     2
    ],
    [
     "tdk-ps1240p02bt",
     21.5,
     12,
     12
    ],
    [
     "cui-cst-931rp-a",
     10.8,
     9,
     9
    ],
    [
     "kingstate-kcg0601",
     6.8,
     6.6,
     6.6
    ],
    [
     "prosignal-abt-410-rc",
     12,
     12,
     11.5
    ]
   ]
  }
 },
 "sheet_text": "Buzzers and beepers: 12 mm, 15 mm magnetic; TDK PS1240 piezo — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/buzzers-tht/  (sheet CC BY 4.0)\nBasis: KiCad 3D models of common PCB buzzers (12 × 9.5 mm and 15 × 7.5 mm magnetic with 7.6 mm pin spacing; TDK PS1240 12 mm piezo; CUI CST-931)\nCatalog version: 2026-10-20\n\nSizes: see table below\n- 12 mm magnetic buzzer (the black cylinder on Arduino kits): Ø12 × 9.5 mm, pins 7.6 mm apart, sound hole on top; needs a Ø3–4 mm hole in the case within 2 mm of the port.\n- 15 mm: Ø15 × 7.5 mm, same 7.6 mm pitch. TDK PS1240 piezo: Ø12.2 × 6.5 mm, 5 mm pitch; passive, drive with a square wave.\n- A printed resonant chamber (Ø12 cavity 3 mm deep over the port, exiting through a Ø2.5 hole) makes a 12 mm buzzer noticeably louder.\n\npart  bbox_l_mm  bbox_w_mm  bbox_h_mm\n12x9.5rm7.6  12.5  12.0  12.0\n15x7.5rm7.6  15.0  15.0  10.5\nmallory-ast1109mltrq  15.0  9.0  2.0\ntdk-ps1240p02bt  21.5  12.0  12.0\ncui-cst-931rp-a  10.8  9.0  9.0\nkingstate-kcg0601  6.8  6.6  6.6\nprosignal-abt-410-rc  12.0  12.0  11.5\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- KiCad: kicad-packages3D library (origin of these files) — STEP, WRL — CC BY-SA 4.0 with KiCad exception — https://gitlab.com/kicad/libraries/kicad-packages3D\n\nFree files (CC BY-SA 4.0 (KiCad library license, with the KiCad exception), KiCad library contributors; STEP + STL, 7 parts): https://xemstudio.com/files/kicad/buzzers-tht/index.json\nAPI: https://xemstudio.com/api/geometry?object=buzzers-tht\n",
 "sources": [
  {
   "publisher": "KiCad",
   "title": "kicad-packages3D library (origin of these files)",
   "url": "https://gitlab.com/kicad/libraries/kicad-packages3D",
   "formats": [
    "STEP",
    "WRL"
   ],
   "license": "CC BY-SA 4.0 with KiCad exception",
   "license_verified": true,
   "hosted": true
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "panel-cutouts",
  "leds-tht",
  "pin-headers-2.54mm"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "12 mm magnetic buzzer",
   "exact": "Ø12 × 9.5, pins 7.6 apart, sound port on top",
   "mates": "PCB holes on 7.6 pitch; case sound hole Ø3–4 within 2 of the port",
   "fit": "designed",
   "files": "12x9.5"
  },
  {
   "feature": "15 mm buzzer",
   "exact": "Ø15 × 7.5, pins 7.6 apart",
   "mates": "PCB holes on 7.6 pitch",
   "fit": "designed",
   "files": "15x7.5"
  },
  {
   "feature": "TDK PS1240 piezo",
   "exact": "Ø12.2 × 6.5, pins 5 apart",
   "mates": "PCB holes on 5 mm pitch (passive: square-wave drive)",
   "fit": "designed",
   "files": "tdk-ps1240"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "What is the pin spacing of a 12 mm buzzer?",
   "a": "7.6 mm (0.3 in). The 15 mm buzzers use the same 7.6 mm spacing; the TDK PS1240 piezo uses 5 mm."
  },
  {
   "q": "How tall is a 12 mm buzzer?",
   "a": "9.5 mm for the common 12 × 9.5 magnetic buzzer; 6.5 mm for the PS1240 piezo."
  }
 ],
 "files_license": {
  "name": "CC BY-SA 4.0 (KiCad library license, with the KiCad exception)",
  "holder": "KiCad library contributors",
  "url": "https://www.kicad.org/libraries/license/",
  "note": "Rehosted unmodified (STL converted from the STEP) with the library's LICENSE.md and CREDITS.md beside the files, as the license requires. Using these models in your own design does not make your design share-alike (KiCad exception)."
 },
 "offers": [
  {
   "file": "12x9.5rm7.6",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY-SA 4.0 (KiCad library license, with the KiCad exception)",
   "step": "https://xemstudio.com/files/kicad/buzzers-tht/12x9.5rm7.6.step",
   "stl": "https://xemstudio.com/files/kicad/buzzers-tht/12x9.5rm7.6.stl",
   "note": "KiCad Buzzer_Beeper: Buzzer_12x9.5RM7.6; bbox 12.5 × 12.0 × 12.0 mm"
  },
  {
   "file": "15x7.5rm7.6",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY-SA 4.0 (KiCad library license, with the KiCad exception)",
   "step": "https://xemstudio.com/files/kicad/buzzers-tht/15x7.5rm7.6.step",
   "stl": "https://xemstudio.com/files/kicad/buzzers-tht/15x7.5rm7.6.stl",
   "note": "KiCad Buzzer_Beeper: Buzzer_15x7.5RM7.6; bbox 15.0 × 15.0 × 10.5 mm"
  },
  {
   "file": "mallory-ast1109mltrq",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY-SA 4.0 (KiCad library license, with the KiCad exception)",
   "step": "https://xemstudio.com/files/kicad/buzzers-tht/mallory-ast1109mltrq.step",
   "stl": "https://xemstudio.com/files/kicad/buzzers-tht/mallory-ast1109mltrq.stl",
   "note": "KiCad Buzzer_Beeper: Buzzer_Mallory_AST1109MLTRQ; bbox 15.0 × 9.0 × 2.0 mm"
  },
  {
   "file": "tdk-ps1240p02bt",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY-SA 4.0 (KiCad library license, with the KiCad exception)",
   "step": "https://xemstudio.com/files/kicad/buzzers-tht/tdk-ps1240p02bt.step",
   "stl": "https://xemstudio.com/files/kicad/buzzers-tht/tdk-ps1240p02bt.stl",
   "note": "KiCad Buzzer_Beeper: Buzzer_TDK_PS1240P02BT; bbox 21.5 × 12.0 × 12.0 mm"
  },
  {
   "file": "cui-cst-931rp-a",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY-SA 4.0 (KiCad library license, with the KiCad exception)",
   "step": "https://xemstudio.com/files/kicad/buzzers-tht/cui-cst-931rp-a.step",
   "stl": "https://xemstudio.com/files/kicad/buzzers-tht/cui-cst-931rp-a.stl",
   "note": "KiCad Buzzer_Beeper: MagneticBuzzer_CUI_CST-931RP-A; bbox 10.8 × 9.0 × 9.0 mm"
  },
  {
   "file": "kingstate-kcg0601",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY-SA 4.0 (KiCad library license, with the KiCad exception)",
   "step": "https://xemstudio.com/files/kicad/buzzers-tht/kingstate-kcg0601.step",
   "stl": "https://xemstudio.com/files/kicad/buzzers-tht/kingstate-kcg0601.stl",
   "note": "KiCad Buzzer_Beeper: MagneticBuzzer_Kingstate_KCG0601; bbox 6.8 × 6.6 × 6.6 mm"
  },
  {
   "file": "prosignal-abt-410-rc",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY-SA 4.0 (KiCad library license, with the KiCad exception)",
   "step": "https://xemstudio.com/files/kicad/buzzers-tht/prosignal-abt-410-rc.step",
   "stl": "https://xemstudio.com/files/kicad/buzzers-tht/prosignal-abt-410-rc.stl",
   "note": "KiCad Buzzer_Beeper: MagneticBuzzer_ProSignal_ABT-410-RC; bbox 12.0 × 12.0 × 11.5 mm"
  }
 ],
 "markdown": "https://xemstudio.com/objects/buzzers-tht/index.md"
}