{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "can-lid-diaphragm-set",
 "name": "Can-lid diaphragm set: membrane, clamp rings and centre disc, Ø40 / 50 / 60",
 "kind": "standard",
 "category": "Hardware",
 "group": "Diaphragms & membranes",
 "year": null,
 "question": "What diaphragm set fits the lid of a can?",
 "tags": [
  "diaphragm",
  "clamp ring",
  "power piston",
  "can engine",
  "stirling",
  "long earth society"
 ],
 "aliases": [
  "diaphragm clamp ring stl",
  "stirling diaphragm piston",
  "can engine diaphragm dimensions",
  "diaphragm centre disc"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": true,
 "free_files": 9,
 "url": "https://xemstudio.com/objects/can-lid-diaphragm-set/",
 "sheet_txt": "https://xemstudio.com/objects/can-lid-diaphragm-set/sheet.txt",
 "sheet": {
  "basis": "Ring bore = diaphragm working diameter; centre disc at half the bore; 6 × M3 clearance (ISO 273) on the ring",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "The diaphragm power piston of the can engine: a 0.2 mm membrane clamped round its edge between two identical rings, with a stiff centre disc the con-rod screws to.",
   "Rings come in Ø40, Ø50 and Ø60 bores, each 3 thick with an outside of bore + 16 (Ø56 / 66 / 76) and 6 × Ø3.4 holes on a bore + 8 circle (Ø48 / 58 / 68).",
   "Each ring size has its own centre disc at half the bore: Ø20, Ø25 or Ø30 × 2 with a Ø3.2 hole for the M3 con-rod screw.",
   "Each membrane is the rings' outside diameter (Ø56 / 66 / 76) × 0.2 with the same six Ø3.4 holes and a Ø3.2 centre hole; its free span is the ring bore. One membrane, two rings and one disc of the same size make one diaphragm."
  ],
  "table": {
   "columns": [
    "size",
    "ring bore",
    "ring outside",
    "screw circle",
    "ring thickness",
    "disc",
    "disc hole"
   ],
   "rows": [
    [
     "40",
     40,
     56,
     48,
     3,
     "Ø20 × 2",
     3.2
    ],
    [
     "50",
     50,
     66,
     58,
     3,
     "Ø25 × 2",
     3.2
    ],
    [
     "60",
     60,
     76,
     68,
     3,
     "Ø30 × 2",
     3.2
    ]
   ]
  }
 },
 "sheet_text": "Can-lid diaphragm set: membrane, clamp rings and centre disc, Ø40 / 50 / 60 — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/can-lid-diaphragm-set/  (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/)\nBasis: Ring bore = diaphragm working diameter; centre disc at half the bore; 6 × M3 clearance (ISO 273) on the ring\nCatalog version: 2026-10-20\n\nSizes: see table below\n- The diaphragm power piston of the can engine: a 0.2 mm membrane clamped round its edge between two identical rings, with a stiff centre disc the con-rod screws to.\n- Rings come in Ø40, Ø50 and Ø60 bores, each 3 thick with an outside of bore + 16 (Ø56 / 66 / 76) and 6 × Ø3.4 holes on a bore + 8 circle (Ø48 / 58 / 68).\n- Each ring size has its own centre disc at half the bore: Ø20, Ø25 or Ø30 × 2 with a Ø3.2 hole for the M3 con-rod screw.\n- Each membrane is the rings' outside diameter (Ø56 / 66 / 76) × 0.2 with the same six Ø3.4 holes and a Ø3.2 centre hole; its free span is the ring bore. One membrane, two rings and one disc of the same size make one diaphragm.\n\nsize  ring bore  ring outside  screw circle  ring thickness  disc  disc hole\n40  40  56  48  3  Ø20 × 2  3.2\n50  50  66  58  3  Ø25 × 2  3.2\n60  60  76  68  3  Ø30 × 2  3.2\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- Wikipedia: Stirling engine — web — CC BY-SA 4.0 (text) — https://en.wikipedia.org/wiki/Stirling_engine\n- Long Earth Society: Can engine build — video, web — LES site — https://longearthsociety.com/engineering/\n- Long Earth Society: Engine builds (videos and write-ups) — web, video — LES site — https://longearthsociety.com/engineering/\n\nFree files (Xem Studio Design License, Xem Studio; STEP + STL, 9 parts): https://xemstudio.com/files/hardware/can-lid-diaphragm-set/index.json\nAPI: https://xemstudio.com/api/geometry?object=can-lid-diaphragm-set\n",
 "sources": [
  {
   "publisher": "Wikipedia",
   "title": "Stirling engine",
   "url": "https://en.wikipedia.org/wiki/Stirling_engine",
   "formats": [
    "web"
   ],
   "license": "CC BY-SA 4.0 (text)",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Long Earth Society",
   "title": "Can engine build",
   "url": "https://longearthsociety.com/engineering/",
   "formats": [
    "video",
    "web"
   ],
   "license": "LES site",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Long Earth Society",
   "title": "Engine builds (videos and write-ups)",
   "url": "https://longearthsociety.com/engineering/",
   "formats": [
    "web",
    "video"
   ],
   "license": "LES site",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "can-top-caps",
  "pin-end-con-rods",
  "syringe-cradle"
 ],
 "fits": [
  {
   "role": "Connects to",
   "items": [
    {
     "slug": "pin-end-con-rods",
     "why": "con-rod screwed to the centre disc's Ø3.2 hole"
    }
   ]
  },
  {
   "role": "Alternatives",
   "items": [
    {
     "slug": "syringe-cradle",
     "why": "a syringe as the power piston instead"
    }
   ]
  },
  {
   "role": "Also needed",
   "items": [
    {
     "slug": "socket-head-cap-screws-metric",
     "why": "6 × M3 through the rings, 1 × M3 in the disc"
    }
   ]
  }
 ],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "clamp-ring screw holes",
   "exact": "Ø3.4",
   "mates": "M3 screw clearance",
   "fit": "designed",
   "files": "diaphragm-ring-"
  },
  {
   "feature": "centre-disc screw hole",
   "exact": "Ø3.2",
   "mates": "M3 screw clearance (ISO 273 fine)",
   "fit": "designed",
   "files": "diaphragm-disc-"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "Which centre disc goes with which ring?",
   "a": "Half the ring bore: Ø20 disc with the Ø40 rings, Ø25 with Ø50, Ø30 with Ø60."
  },
  {
   "q": "How are the diaphragm rings fastened?",
   "a": "Six M3 screws through Ø3.4 holes on a circle 8 mm larger than the bore (Ø58 on the 50 mm ring), through both rings and the membrane."
  },
  {
   "q": "Which size does the can engine use?",
   "a": "The can-engine build list uses the Ø50 rings with the Ø25 disc."
  }
 ],
 "files_license": {
  "name": "Xem Studio Design License",
  "holder": "Xem Studio",
  "url": "https://xemstudio.com/license/",
  "note": "Xem Studio's own design: free to use, print, modify and sell things made from it; not to be republished or redistributed as files."
 },
 "offers": [
  {
   "file": "diaphragm-ring-40",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/can-lid-diaphragm-set/diaphragm-ring-40.step",
   "stl": "https://xemstudio.com/files/hardware/can-lid-diaphragm-set/diaphragm-ring-40.stl",
   "note": "diaphragm clamp ring Ø40 bore × Ø56, 3 thick, 6 × Ø3.4 (M3 clearance); two per diaphragm, one each side of the membrane"
  },
  {
   "file": "diaphragm-disc-20",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/can-lid-diaphragm-set/diaphragm-disc-20.step",
   "stl": "https://xemstudio.com/files/hardware/can-lid-diaphragm-set/diaphragm-disc-20.stl",
   "note": "diaphragm centre disc Ø20 × 2, Ø3.2 M3 clearance hole for the con-rod screw"
  },
  {
   "file": "diaphragm-membrane-40",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/can-lid-diaphragm-set/diaphragm-membrane-40.step",
   "stl": "https://xemstudio.com/files/hardware/can-lid-diaphragm-set/diaphragm-membrane-40.stl",
   "note": "diaphragm membrane Ø56 × 0.2 with the rings' 6 × Ø3.4 holes and a Ø3.2 centre hole; free span Ø40 between the rings"
  },
  {
   "file": "diaphragm-ring-50",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/can-lid-diaphragm-set/diaphragm-ring-50.step",
   "stl": "https://xemstudio.com/files/hardware/can-lid-diaphragm-set/diaphragm-ring-50.stl",
   "note": "diaphragm clamp ring Ø50 bore × Ø66, 3 thick, 6 × Ø3.4 (M3 clearance); two per diaphragm, one each side of the membrane"
  },
  {
   "file": "diaphragm-disc-25",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/can-lid-diaphragm-set/diaphragm-disc-25.step",
   "stl": "https://xemstudio.com/files/hardware/can-lid-diaphragm-set/diaphragm-disc-25.stl",
   "note": "diaphragm centre disc Ø25 × 2, Ø3.2 M3 clearance hole for the con-rod screw"
  },
  {
   "file": "diaphragm-membrane-50",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/can-lid-diaphragm-set/diaphragm-membrane-50.step",
   "stl": "https://xemstudio.com/files/hardware/can-lid-diaphragm-set/diaphragm-membrane-50.stl",
   "note": "diaphragm membrane Ø66 × 0.2 with the rings' 6 × Ø3.4 holes and a Ø3.2 centre hole; free span Ø50 between the rings"
  },
  {
   "file": "diaphragm-ring-60",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/can-lid-diaphragm-set/diaphragm-ring-60.step",
   "stl": "https://xemstudio.com/files/hardware/can-lid-diaphragm-set/diaphragm-ring-60.stl",
   "note": "diaphragm clamp ring Ø60 bore × Ø76, 3 thick, 6 × Ø3.4 (M3 clearance); two per diaphragm, one each side of the membrane"
  },
  {
   "file": "diaphragm-disc-30",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/can-lid-diaphragm-set/diaphragm-disc-30.step",
   "stl": "https://xemstudio.com/files/hardware/can-lid-diaphragm-set/diaphragm-disc-30.stl",
   "note": "diaphragm centre disc Ø30 × 2, Ø3.2 M3 clearance hole for the con-rod screw"
  },
  {
   "file": "diaphragm-membrane-60",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/can-lid-diaphragm-set/diaphragm-membrane-60.step",
   "stl": "https://xemstudio.com/files/hardware/can-lid-diaphragm-set/diaphragm-membrane-60.stl",
   "note": "diaphragm membrane Ø76 × 0.2 with the rings' 6 × Ø3.4 holes and a Ø3.2 centre hole; free span Ø60 between the rings"
  }
 ],
 "markdown": "https://xemstudio.com/objects/can-lid-diaphragm-set/index.md"
}