{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "con-rods-626-625",
 "name": "Con-rods and links with a 626 big end and a 625 small end: 55 to 488 mm",
 "kind": "hardware",
 "category": "Hardware",
 "group": "Gears, cranks & flywheels",
 "year": null,
 "question": "What con-rod uses 626 and 625 bearings?",
 "tags": [
  "con-rod",
  "connecting rod",
  "tri-clamp",
  "stirling",
  "long earth society"
 ],
 "aliases": [
  "stirling con rod 626",
  "connecting rod ball bearing"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": true,
 "free_files": 5,
 "url": "https://xemstudio.com/objects/con-rods-626-625/",
 "sheet_txt": "https://xemstudio.com/objects/con-rods-626-625/sheet.txt",
 "sheet": {
  "basis": "626 and 625 sizes from their standards; lengths are design values",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "At 5 bar gauge the piston force swings about ±317 N; a 626 big end on a Ø6 crank pin and a 625 small end on the Ø5 wrist pin carry it on ball bearings."
  ],
  "table": {
   "columns": [
    "length_mm",
    "big end",
    "small end"
   ],
   "rows": [
    [
     100,
     "626",
     "625"
    ],
    [
     120,
     "626",
     "625"
    ],
    [
     55,
     "626",
     "625"
    ],
    [
     60,
     "626",
     "625"
    ],
    [
     488.4,
     "626",
     "625"
    ]
   ]
  }
 },
 "sheet_text": "Con-rods and links with a 626 big end and a 625 small end: 55 to 488 mm — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/con-rods-626-625/  (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/)\nBasis: 626 and 625 sizes from their standards; lengths are design values\nCatalog version: 2026-10-20\n\nSizes: see table below\n- At 5 bar gauge the piston force swings about ±317 N; a 626 big end on a Ø6 crank pin and a 625 small end on the Ø5 wrist pin carry it on ball bearings.\n\nlength_mm  big end  small end\n100.0  626  625\n120.0  626  625\n55.0  626  625\n60.0  626  625\n488.4  626  625\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- Long Earth Society: Engine builds — web, video — LES site — https://longearthsociety.com/engineering/\n\nFree files (Xem Studio Design License, Xem Studio; STEP + STL, 5 parts): https://xemstudio.com/files/hardware/con-rods-626-625/index.json\nAPI: https://xemstudio.com/api/geometry?object=con-rods-626-625\n",
 "sources": [
  {
   "publisher": "Long Earth Society",
   "title": "Engine builds",
   "url": "https://longearthsociety.com/engineering/",
   "formats": [
    "web",
    "video"
   ],
   "license": "LES site",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "crosshead-yokes-stub-pin",
  "built-up-crank-webs-8mm"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "big end",
   "exact": "Ø19 × 6 pocket, Ø15 lip",
   "mates": "626 bearing OD",
   "fit": "press",
   "files": "all"
  },
  {
   "feature": "small end",
   "exact": "Ø16 × 5 pocket, Ø12 lip",
   "mates": "625 bearing OD",
   "fit": "press",
   "files": "all"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "Which engine uses which?",
   "a": "100: both rods of the horizontal gamma and the walking-beam gamma's displacer; 120 and 55: the beta's piston and displacer; 60 and the long link: the walking beam's two links."
  }
 ],
 "files_license": {
  "name": "Xem Studio Design License",
  "holder": "Xem Studio",
  "url": "https://xemstudio.com/license/",
  "note": "Xem Studio's own design: free to use, print, modify and sell things made from it; not to be republished or redistributed as files."
 },
 "offers": [
  {
   "file": "conrod-626-625-100",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/con-rods-626-625/conrod-626-625-100.step",
   "stl": "https://xemstudio.com/files/hardware/con-rods-626-625/conrod-626-625-100.stl",
   "note": "con-rod 100 between eyes, 7 thick: 626 pocket Ø19 × 6 (big end), 625 pocket Ø16 × 5 (small end)"
  },
  {
   "file": "conrod-626-625-120",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/con-rods-626-625/conrod-626-625-120.step",
   "stl": "https://xemstudio.com/files/hardware/con-rods-626-625/conrod-626-625-120.stl",
   "note": "con-rod 120 between eyes, 7 thick: 626 pocket Ø19 × 6 (big end), 625 pocket Ø16 × 5 (small end)"
  },
  {
   "file": "conrod-626-625-55",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/con-rods-626-625/conrod-626-625-55.step",
   "stl": "https://xemstudio.com/files/hardware/con-rods-626-625/conrod-626-625-55.stl",
   "note": "con-rod 55 between eyes, 7 thick: 626 pocket Ø19 × 6 (big end), 625 pocket Ø16 × 5 (small end)"
  },
  {
   "file": "conrod-626-625-60",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/con-rods-626-625/conrod-626-625-60.step",
   "stl": "https://xemstudio.com/files/hardware/con-rods-626-625/conrod-626-625-60.stl",
   "note": "con-rod 60 between eyes, 7 thick: 626 pocket Ø19 × 6 (big end), 625 pocket Ø16 × 5 (small end)"
  },
  {
   "file": "conrod-626-625-488.4",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/con-rods-626-625/conrod-626-625-488.4.step",
   "stl": "https://xemstudio.com/files/hardware/con-rods-626-625/conrod-626-625-488.4.stl",
   "note": "con-rod 488.4 between eyes, 7 thick: 626 pocket Ø19 × 6 (big end), 625 pocket Ø16 × 5 (small end)"
  }
 ],
 "markdown": "https://xemstudio.com/objects/con-rods-626-625/index.md"
}