{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "crank-stands-625",
 "name": "Shaft stands with a 625 bearing pocket, 40 and 60 mm axis height",
 "kind": "hardware",
 "category": "Hardware",
 "group": "Frames & stands",
 "year": null,
 "question": "What stand holds a 625 bearing at a set height?",
 "tags": [
  "crank stand",
  "625",
  "bearing block",
  "gamma",
  "stirling",
  "long earth society"
 ],
 "aliases": [
  "crank stand 625 bearing",
  "stirling crankshaft support",
  "5mm shaft bearing stand",
  "crank bearing upright"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": true,
 "free_files": 2,
 "url": "https://xemstudio.com/objects/crank-stands-625/",
 "sheet_txt": "https://xemstudio.com/objects/crank-stands-625/sheet.txt",
 "sheet": {
  "basis": "Upright with a Ø16 × 5 pocket at the 625 OD; slotted foot for M3 at 42 mm",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "A 30 wide × 8 thick upright with a rounded top (R15) on a 50 × 24 × 3 foot. Shaft axis 40 or 60 mm above the foot's underside; overall 55 or 75 tall.",
   "A Ø16 × 5 pocket (625 OD) on one face at the axis, and a Ø11.2 clearance hole through so the Ø5 shaft passes without contact.",
   "Two slots 3.4 × 10 in the foot, 42 mm apart, for M3 into the gamma base plate slots. Two stands carry one shaft."
  ],
  "table": {
   "columns": [
    "file",
    "axis height",
    "overall height",
    "pocket",
    "clearance hole",
    "foot"
   ],
   "rows": [
    [
     "crank-stand-625-h40",
     40,
     55,
     "Ø16 × 5",
     "Ø11.2",
     "50 × 24 × 3, slots 3.4 at 42"
    ],
    [
     "crank-stand-625-h60",
     60,
     75,
     "Ø16 × 5",
     "Ø11.2",
     "50 × 24 × 3, slots 3.4 at 42"
    ]
   ]
  }
 },
 "sheet_text": "Shaft stands with a 625 bearing pocket, 40 and 60 mm axis height — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/crank-stands-625/  (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/)\nBasis: Upright with a Ø16 × 5 pocket at the 625 OD; slotted foot for M3 at 42 mm\nCatalog version: 2026-10-20\n\nSizes: see table below\n- A 30 wide × 8 thick upright with a rounded top (R15) on a 50 × 24 × 3 foot. Shaft axis 40 or 60 mm above the foot's underside; overall 55 or 75 tall.\n- A Ø16 × 5 pocket (625 OD) on one face at the axis, and a Ø11.2 clearance hole through so the Ø5 shaft passes without contact.\n- Two slots 3.4 × 10 in the foot, 42 mm apart, for M3 into the gamma base plate slots. Two stands carry one shaft.\n\nfile  axis height  overall height  pocket  clearance hole  foot\ncrank-stand-625-h40  40  55  Ø16 × 5  Ø11.2  50 × 24 × 3, slots 3.4 at 42\ncrank-stand-625-h60  60  75  Ø16 × 5  Ø11.2  50 × 24 × 3, slots 3.4 at 42\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- Long Earth Society: Tri-clamp Stirling engine builds — web, video — LES site — https://longearthsociety.com/engineering/\n\nFree files (Xem Studio Design License, Xem Studio; STEP + STL, 2 parts): https://xemstudio.com/files/hardware/crank-stands-625/index.json\nAPI: https://xemstudio.com/api/geometry?object=crank-stands-625\n",
 "sources": [
  {
   "publisher": "Long Earth Society",
   "title": "Tri-clamp Stirling engine builds",
   "url": "https://longearthsociety.com/engineering/",
   "formats": [
    "web",
    "video"
   ],
   "license": "LES site",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "d-flat-crankshafts-3-5-8",
  "tri-clamp-spool-base-plate",
  "ball-bearings-metric",
  "counterweighted-crank-discs",
  "shaft-spacers"
 ],
 "fits": [
  {
   "role": "Parts that fit it",
   "items": [
    {
     "slug": "counterweighted-crank-discs",
     "why": "on the shaft beside the 625 stand"
    },
    {
     "slug": "nut-pocket-flywheels",
     "why": "on the Ø5 shaft outside the stand"
    }
   ]
  },
  {
   "role": "Goes in or on",
   "items": [
    {
     "slug": "tri-clamp-spool-base-plate",
     "why": "M3 through the foot slots into the plate slots"
    }
   ]
  },
  {
   "role": "Connects to",
   "items": [
    {
     "slug": "ball-bearings-metric",
     "why": "625 in the Ø16 pocket"
    },
    {
     "slug": "d-flat-crankshafts-3-5-8",
     "why": "Ø5 shaft through the 625"
    }
   ]
  },
  {
   "role": "Also needed",
   "items": [
    {
     "slug": "shaft-spacers",
     "why": "1 mm gap to the crank disc"
    }
   ]
  }
 ],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "crank-stand bearing pocket",
   "exact": "Ø16",
   "mates": "625 bearing",
   "fit": "press",
   "files": "crank-stand-"
  },
  {
   "feature": "crank-stand foot slots",
   "exact": "3.4 wide",
   "mates": "M3 screw clearance",
   "fit": "designed",
   "files": "crank-stand-"
  },
  {
   "feature": "crank-stand shaft clearance",
   "exact": "Ø11.2",
   "mates": "Ø5 shaft (no contact)",
   "fit": "designed",
   "files": "crank-stand-"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "What bearing goes in the crank stand?",
   "a": "A 625 (5 × 16 × 5) in the Ø16 × 5 pocket."
  },
  {
   "q": "How high is the crankshaft on the stands?",
   "a": "40 or 60 mm from the bottom of the foot to the shaft axis."
  }
 ],
 "files_license": {
  "name": "Xem Studio Design License",
  "holder": "Xem Studio",
  "url": "https://xemstudio.com/license/",
  "note": "Xem Studio's own design: free to use, print, modify and sell things made from it; not to be republished or redistributed as files."
 },
 "offers": [
  {
   "file": "crank-stand-625-h40",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/crank-stands-625/crank-stand-625-h40.step",
   "stl": "https://xemstudio.com/files/hardware/crank-stands-625/crank-stand-625-h40.stl",
   "note": "crank stand, Ø5 shaft axis 40 mm up, Ø16 × 5 pocket for a 625 bearing, Ø11.2 shaft clearance, 50 × 24 × 3 foot with 2 × M3 slots 3.4 × 10 (along the shaft) on 42 mm centres across the shaft; two carry one crankshaft and seat on the gamma base plate's slots"
  },
  {
   "file": "crank-stand-625-h60",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/crank-stands-625/crank-stand-625-h60.step",
   "stl": "https://xemstudio.com/files/hardware/crank-stands-625/crank-stand-625-h60.stl",
   "note": "crank stand, Ø5 shaft axis 60 mm up, Ø16 × 5 pocket for a 625 bearing, Ø11.2 shaft clearance, 50 × 24 × 3 foot with 2 × M3 slots 3.4 × 10 (along the shaft) on 42 mm centres across the shaft; two carry one crankshaft and seat on the gamma base plate's slots"
  }
 ],
 "markdown": "https://xemstudio.com/objects/crank-stands-625/index.md"
}