{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "crosshead-yokes-stub-pin",
 "name": "Crosshead yokes with a Ø5 stub wrist pin: Ø6, Ø8 and hollow Ø10 rods",
 "kind": "hardware",
 "category": "Hardware",
 "group": "Gears, cranks & flywheels",
 "year": null,
 "question": "How do I join a con-rod to a piston rod outside the cylinder?",
 "tags": [
  "yoke",
  "crosshead",
  "wrist pin",
  "tri-clamp",
  "stirling",
  "long earth society"
 ],
 "aliases": [
  "crosshead yoke",
  "stub pin rod end"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": true,
 "free_files": 3,
 "url": "https://xemstudio.com/objects/crosshead-yokes-stub-pin/",
 "sheet_txt": "https://xemstudio.com/objects/crosshead-yokes-stub-pin/sheet.txt",
 "sheet": {
  "basis": "Design values; Ø5 dowel (ISO 8734) stub pin with a 625 in the con-rod's small end",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "A block on the rod's end with a Ø5 dowel pressed 6 mm into its side: the con-rod's 625 runs on the pin beside the block and a Ø5 shaft collar holds it. The rod's axis stays clear, so in the beta the displacer rod passes straight up through the hollow rod's yoke (and its 6 × 10 × 10 bushing guides it there)."
  ],
  "table": {
   "columns": [
    "part",
    "socket",
    "pin height",
    "block"
   ],
   "rows": [
    [
     "yoke-rod6-m6",
     "M6 × 12",
     15,
     "14 × 14 × 24"
    ],
    [
     "yoke-rod8-m8",
     "M8 × 12",
     16,
     "14 × 14 × 26"
    ],
    [
     "yoke-tube10-m10x1",
     "M10 × 1 × 16",
     22,
     "14 × 24 × 30"
    ]
   ]
  }
 },
 "sheet_text": "Crosshead yokes with a Ø5 stub wrist pin: Ø6, Ø8 and hollow Ø10 rods — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/crosshead-yokes-stub-pin/  (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/)\nBasis: Design values; Ø5 dowel (ISO 8734) stub pin with a 625 in the con-rod's small end\nCatalog version: 2026-10-20\n\nSizes: see table below\n- A block on the rod's end with a Ø5 dowel pressed 6 mm into its side: the con-rod's 625 runs on the pin beside the block and a Ø5 shaft collar holds it. The rod's axis stays clear, so in the beta the displacer rod passes straight up through the hollow rod's yoke (and its 6 × 10 × 10 bushing guides it there).\n\npart  socket  pin height  block\nyoke-rod6-m6  M6 × 12  15  14 × 14 × 24\nyoke-rod8-m8  M8 × 12  16  14 × 14 × 26\nyoke-tube10-m10x1  M10 × 1 × 16  22  14 × 24 × 30\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- Long Earth Society: Engine builds — web, video — LES site — https://longearthsociety.com/engineering/\n\nFree files (Xem Studio Design License, Xem Studio; STEP + STL, 3 parts): https://xemstudio.com/files/hardware/crosshead-yokes-stub-pin/index.json\nAPI: https://xemstudio.com/api/geometry?object=crosshead-yokes-stub-pin\n",
 "sources": [
  {
   "publisher": "Long Earth Society",
   "title": "Engine builds",
   "url": "https://longearthsociety.com/engineering/",
   "formats": [
    "web",
    "video"
   ],
   "license": "LES site",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "con-rods-626-625",
  "precision-rods-and-crank-shafts"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "rod sockets",
   "exact": "M6 (Ø5.0 × 12) / M8 (Ø6.8 × 12) / M10 × 1 (Ø9.0 × 16)",
   "mates": "rod ends",
   "fit": "designed",
   "files": "all"
  },
  {
   "feature": "stub-pin hole",
   "exact": "Ø5 × 6",
   "mates": "Ø5 dowel wrist pin",
   "fit": "press",
   "files": "all"
  },
  {
   "feature": "bushing seat",
   "exact": "Ø10 × 10 at the top",
   "mates": "6 × 10 × 10 sleeve bushing (guides the displacer rod)",
   "fit": "press",
   "files": "yoke-tube10"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "Why not a clevis?",
   "a": "A clevis pin crosses the rod's axis; the beta's coaxial rods need the axis clear."
  }
 ],
 "files_license": {
  "name": "Xem Studio Design License",
  "holder": "Xem Studio",
  "url": "https://xemstudio.com/license/",
  "note": "Xem Studio's own design: free to use, print, modify and sell things made from it; not to be republished or redistributed as files."
 },
 "offers": [
  {
   "file": "yoke-rod6-m6",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/crosshead-yokes-stub-pin/yoke-rod6-m6.step",
   "stl": "https://xemstudio.com/files/hardware/crosshead-yokes-stub-pin/yoke-rod6-m6.stl",
   "note": "crosshead yoke 14 × 14 × 24 for the rod6 rod: tapped socket from the bottom, Ø5 stub-pin hole 6 deep in the −Y face at 15"
  },
  {
   "file": "yoke-rod8-m8",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/crosshead-yokes-stub-pin/yoke-rod8-m8.step",
   "stl": "https://xemstudio.com/files/hardware/crosshead-yokes-stub-pin/yoke-rod8-m8.stl",
   "note": "crosshead yoke 14 × 14 × 26 for the rod8 rod: tapped socket from the bottom, Ø5 stub-pin hole 6 deep in the −Y face at 16"
  },
  {
   "file": "yoke-tube10-m10x1",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/crosshead-yokes-stub-pin/yoke-tube10-m10x1.step",
   "stl": "https://xemstudio.com/files/hardware/crosshead-yokes-stub-pin/yoke-tube10-m10x1.stl",
   "note": "crosshead yoke 14 × 14 × 30 for the tube10 rod: tapped socket from the bottom, Ø5 stub-pin hole 6 deep in the −Y face at 22, Ø7 passage and Ø10 × 10 bushing seat at the top"
  }
 ],
 "markdown": "https://xemstudio.com/objects/crosshead-yokes-stub-pin/index.md"
}