{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "furniture-dowels",
 "name": "Furniture dowels Ø6, Ø8, Ø10 × 30–40 mm (the 8 × 30 flat-pack dowel)",
 "kind": "hardware",
 "category": "Hardware",
 "group": "Furniture & cabinet hardware",
 "year": null,
 "question": "What size dowels does IKEA furniture use?",
 "tags": [
  "dowel",
  "furniture",
  "ikea",
  "flat pack"
 ],
 "aliases": [
  "ikea dowel size",
  "8x30 dowel",
  "wooden dowel pins",
  "furniture dowel replacement"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": false,
 "free_files": 9,
 "url": "https://xemstudio.com/objects/furniture-dowels/",
 "sheet_txt": "https://xemstudio.com/objects/furniture-dowels/sheet.txt",
 "sheet": {
  "basis": "Generic fluted beech dowel range (Ostermann); the 8 × 30 flat-pack dowel measured by makers",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "Flat-pack furniture mostly uses Ø8 × 30 mm fluted dowels; replacements are generic.",
   "Drill 0.2 mm over nominal in MDF / chipboard (Ø8.2 for Ø8).",
   "Printed dowels: print standing up, 100 % infill, and glue them; for load-bearing joints use wood."
  ],
  "table": {
   "columns": [
    "dia_mm",
    "length_mm",
    "hole_mm",
    "chamfer_mm"
   ],
   "rows": [
    [
     6,
     30,
     "6.2",
     0.75
    ],
    [
     6,
     35,
     "6.2",
     0.75
    ],
    [
     6,
     40,
     "6.2",
     0.75
    ],
    [
     8,
     30,
     "8.2",
     1
    ],
    [
     8,
     35,
     "8.2",
     1
    ],
    [
     8,
     40,
     "8.2",
     1
    ],
    [
     10,
     30,
     "10.2",
     1.25
    ],
    [
     10,
     35,
     "10.2",
     1.25
    ],
    [
     10,
     40,
     "10.2",
     1.25
    ]
   ]
  }
 },
 "sheet_text": "Furniture dowels Ø6, Ø8, Ø10 × 30–40 mm (the 8 × 30 flat-pack dowel) — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/furniture-dowels/  (sheet CC BY 4.0)\nBasis: Generic fluted beech dowel range (Ostermann); the 8 × 30 flat-pack dowel measured by makers\nCatalog version: 2026-10-20\n\nSizes: see table below\n- Flat-pack furniture mostly uses Ø8 × 30 mm fluted dowels; replacements are generic.\n- Drill 0.2 mm over nominal in MDF / chipboard (Ø8.2 for Ø8).\n- Printed dowels: print standing up, 100 % infill, and glue them; for load-bearing joints use wood.\n\ndia_mm  length_mm  hole_mm  chamfer_mm\n6  30  6.2  0.75\n6  35  6.2  0.75\n6  40  6.2  0.75\n8  30  8.2  1.0\n8  35  8.2  1.0\n8  40  8.2  1.0\n10  30  10.2  1.25\n10  35  10.2  1.25\n10  40  10.2  1.25\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- Ostermann: Fluted beech dowels (REDOCOL) — web — Publisher's page; dimensions are facts — https://www.ostermann.eu/en_GB/product/fluted-beech-dowels-redocol-fscr-100-int-coc-002008\n\nFree files (CC BY 4.0, Xem Studio; STEP + STL, 9 parts): https://xemstudio.com/files/hardware/furniture-dowels/index.json\nAPI: https://xemstudio.com/api/geometry?object=furniture-dowels\n",
 "sources": [
  {
   "publisher": "Ostermann",
   "title": "Fluted beech dowels (REDOCOL)",
   "url": "https://www.ostermann.eu/en_GB/product/fluted-beech-dowels-redocol-fscr-100-int-coc-002008",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "cam-lock-15mm",
  "cross-dowel-m6"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "shank",
   "exact": "Ø6 / Ø8 / Ø10 × 30–40, fluted",
   "mates": "blind hole in MDF / chipboard: Ø6.2 / Ø8.2 / Ø10.2 (0.2 over nominal)",
   "fit": "slide",
   "files": "dowel-"
  },
  {
   "feature": "end chamfer",
   "exact": "0.75 / 1.0 / 1.25 for Ø6 / Ø8 / Ø10",
   "mates": "lead-in at the hole entry",
   "fit": "designed",
   "files": "dowel-"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "What dowel size is IKEA?",
   "a": "Mostly Ø8 × 30 mm fluted wood dowels."
  }
 ],
 "files_license": null,
 "offers": [
  {
   "file": "dowel-6x30",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/furniture-dowels/dowel-6x30.step",
   "stl": "https://xemstudio.com/files/hardware/furniture-dowels/dowel-6x30.stl",
   "note": "Fluted wood dowel Ø6 × 30: chamfered ends, 8 glue flutes; drill Ø6.2 in MDF / chipboard"
  },
  {
   "file": "dowel-6x35",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/furniture-dowels/dowel-6x35.step",
   "stl": "https://xemstudio.com/files/hardware/furniture-dowels/dowel-6x35.stl",
   "note": "Fluted wood dowel Ø6 × 35: chamfered ends, 8 glue flutes; drill Ø6.2 in MDF / chipboard"
  },
  {
   "file": "dowel-6x40",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/furniture-dowels/dowel-6x40.step",
   "stl": "https://xemstudio.com/files/hardware/furniture-dowels/dowel-6x40.stl",
   "note": "Fluted wood dowel Ø6 × 40: chamfered ends, 8 glue flutes; drill Ø6.2 in MDF / chipboard"
  },
  {
   "file": "dowel-8x30",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/furniture-dowels/dowel-8x30.step",
   "stl": "https://xemstudio.com/files/hardware/furniture-dowels/dowel-8x30.stl",
   "note": "Fluted wood dowel Ø8 × 30: chamfered ends, 8 glue flutes; drill Ø8.2 in MDF / chipboard"
  },
  {
   "file": "dowel-8x35",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/furniture-dowels/dowel-8x35.step",
   "stl": "https://xemstudio.com/files/hardware/furniture-dowels/dowel-8x35.stl",
   "note": "Fluted wood dowel Ø8 × 35: chamfered ends, 8 glue flutes; drill Ø8.2 in MDF / chipboard"
  },
  {
   "file": "dowel-8x40",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/furniture-dowels/dowel-8x40.step",
   "stl": "https://xemstudio.com/files/hardware/furniture-dowels/dowel-8x40.stl",
   "note": "Fluted wood dowel Ø8 × 40: chamfered ends, 8 glue flutes; drill Ø8.2 in MDF / chipboard"
  },
  {
   "file": "dowel-10x30",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/furniture-dowels/dowel-10x30.step",
   "stl": "https://xemstudio.com/files/hardware/furniture-dowels/dowel-10x30.stl",
   "note": "Fluted wood dowel Ø10 × 30: chamfered ends, 8 glue flutes; drill Ø10.2 in MDF / chipboard"
  },
  {
   "file": "dowel-10x35",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/furniture-dowels/dowel-10x35.step",
   "stl": "https://xemstudio.com/files/hardware/furniture-dowels/dowel-10x35.stl",
   "note": "Fluted wood dowel Ø10 × 35: chamfered ends, 8 glue flutes; drill Ø10.2 in MDF / chipboard"
  },
  {
   "file": "dowel-10x40",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/furniture-dowels/dowel-10x40.step",
   "stl": "https://xemstudio.com/files/hardware/furniture-dowels/dowel-10x40.stl",
   "note": "Fluted wood dowel Ø10 × 40: chamfered ends, 8 glue flutes; drill Ø10.2 in MDF / chipboard"
  }
 ],
 "markdown": "https://xemstudio.com/objects/furniture-dowels/index.md"
}