{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "heat-set-inserts-ruthex",
 "name": "Heat-set threaded inserts, ruthex RX series: M2 to M8 and #2-56 to 3/8-16",
 "kind": "standard",
 "category": "Hardware",
 "group": "Fasteners",
 "year": null,
 "question": "What hole does a ruthex M3 insert need?",
 "tags": [
  "heat set insert",
  "threaded insert",
  "3d printing",
  "brass insert",
  "fastener"
 ],
 "aliases": [
  "ruthex insert dimensions",
  "ruthex m3 hole size",
  "rx-m3x5.7",
  "ruthex threaded insert stl"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": false,
 "free_files": 17,
 "url": "https://xemstudio.com/objects/heat-set-inserts-ruthex/",
 "sheet_txt": "https://xemstudio.com/objects/heat-set-inserts-ruthex/sheet.txt",
 "sheet": {
  "basis": "ruthex RX series datasheet (d1 insert Ø, d2 tip Ø, L, W min wall, d3 hole Ø); geometry drawn by Xem Studio from those numbers",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "Drawn as: lead-in pilot at the tip Ø over the bottom 15 % of the length, two knurl bands at the insert Ø with a relief groove between, thread as a plain bore at the minor diameter (threads not modelled). Knurl texture is not drawn: the insert Ø is the knurl's outside.",
   "Print the hole at the listed hole Ø, at least the insert length + 1 mm deep for a blind hole (room for displaced plastic), and keep at least W of wall around it. Press the insert in with a soldering iron and insert tip at the plastic's printing temperature until its top is flush."
  ],
  "table": {
   "columns": [
    "article",
    "thread",
    "length_mm",
    "insert_od_mm",
    "tip_mm",
    "hole_mm",
    "min_wall_mm"
   ],
   "rows": [
    [
     "RX-M2x4",
     "M2",
     4,
     3.6,
     3.1,
     3.2,
     1.3
    ],
    [
     "RX-M2.5x5.7",
     "M2.5",
     5.7,
     4.6,
     3.9,
     4,
     1.6
    ],
    [
     "RX-M3Sx4.0",
     "M3",
     4,
     4.6,
     3.9,
     4,
     1.6
    ],
    [
     "RX-M3x5x4",
     "M3",
     4,
     5,
     4.25,
     4.4,
     1.3
    ],
    [
     "RX-M3x5.7",
     "M3",
     5.7,
     4.6,
     3.9,
     4,
     1.6
    ],
    [
     "RX-M4Sx4.0",
     "M4",
     4,
     6.3,
     5.5,
     5.6,
     2.1
    ],
    [
     "RX-M4x8.1",
     "M4",
     8.1,
     6.3,
     5.5,
     5.6,
     2.1
    ],
    [
     "RX-M5Sx5.8",
     "M5",
     5.8,
     7.1,
     6.3,
     6.4,
     2.6
    ],
    [
     "RX-M5x9.5",
     "M5",
     9.5,
     7.1,
     6.3,
     6.4,
     2.6
    ],
    [
     "RX-M6x12.7",
     "M6",
     12.7,
     8.7,
     7.9,
     8,
     3.3
    ],
    [
     "RX-M8x12.7",
     "M8",
     12.7,
     10.1,
     9.5,
     9.6,
     4.5
    ],
    [
     "RX-2-56x4",
     "#2-56",
     4,
     3.6,
     3.1,
     3.2,
     1.3
    ],
    [
     "RX-4-40x5.7",
     "#4-40",
     5.7,
     4.6,
     3.9,
     4,
     1.6
    ],
    [
     "RX-8-32x8.1",
     "#8-32",
     8.1,
     6.3,
     5.5,
     5.6,
     2.1
    ],
    [
     "RX-10-24x9.5",
     "#10-24",
     9.5,
     7.1,
     6.3,
     6.4,
     2.6
    ],
    [
     "RX-1/4-20x12.7",
     "1/4-20",
     12.7,
     8.7,
     7.9,
     8,
     3.3
    ],
    [
     "RX-3/8-16x12.7",
     "3/8-16",
     12.7,
     12.6,
     11.8,
     11.9,
     6
    ]
   ]
  }
 },
 "sheet_text": "Heat-set threaded inserts, ruthex RX series: M2 to M8 and #2-56 to 3/8-16 — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/heat-set-inserts-ruthex/  (sheet CC BY 4.0)\nBasis: ruthex RX series datasheet (d1 insert Ø, d2 tip Ø, L, W min wall, d3 hole Ø); geometry drawn by Xem Studio from those numbers\nCatalog version: 2026-10-20\n\nSizes: see table below\n- Drawn as: lead-in pilot at the tip Ø over the bottom 15 % of the length, two knurl bands at the insert Ø with a relief groove between, thread as a plain bore at the minor diameter (threads not modelled). Knurl texture is not drawn: the insert Ø is the knurl's outside.\n- Print the hole at the listed hole Ø, at least the insert length + 1 mm deep for a blind hole (room for displaced plastic), and keep at least W of wall around it. Press the insert in with a soldering iron and insert tip at the plastic's printing temperature until its top is flush.\n\narticle  thread  length_mm  insert_od_mm  tip_mm  hole_mm  min_wall_mm\nRX-M2x4  M2  4.0  3.6  3.1  3.2  1.3\nRX-M2.5x5.7  M2.5  5.7  4.6  3.9  4.0  1.6\nRX-M3Sx4.0  M3  4.0  4.6  3.9  4.0  1.6\nRX-M3x5x4  M3  4.0  5.0  4.25  4.4  1.3\nRX-M3x5.7  M3  5.7  4.6  3.9  4.0  1.6\nRX-M4Sx4.0  M4  4.0  6.3  5.5  5.6  2.1\nRX-M4x8.1  M4  8.1  6.3  5.5  5.6  2.1\nRX-M5Sx5.8  M5  5.8  7.1  6.3  6.4  2.6\nRX-M5x9.5  M5  9.5  7.1  6.3  6.4  2.6\nRX-M6x12.7  M6  12.7  8.7  7.9  8.0  3.3\nRX-M8x12.7  M8  12.7  10.1  9.5  9.6  4.5\nRX-2-56x4  #2-56  4.0  3.6  3.1  3.2  1.3\nRX-4-40x5.7  #4-40  5.7  4.6  3.9  4.0  1.6\nRX-8-32x8.1  #8-32  8.1  6.3  5.5  5.6  2.1\nRX-10-24x9.5  #10-24  9.5  7.1  6.3  6.4  2.6\nRX-1/4-20x12.7  1/4-20  12.7  8.7  7.9  8.0  3.3\nRX-3/8-16x12.7  3/8-16  12.7  12.6  11.8  11.9  6.0\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- ruthex: RX series product datasheet: d1 insert Ø, d2 tip Ø, L, W min wall, d3 hole Ø (metric and UNC) — PDF — maker's sheet; dimensions cited, nothing copied — https://www.igo3d.com/mediafiles/Sonstiges/Ruthex/ruthex_Datenblatt_RX-Serie.pdf\n\nFree files (CC BY 4.0, Xem Studio; STEP + STL, 17 parts): https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/index.json\nAPI: https://xemstudio.com/api/geometry?object=heat-set-inserts-ruthex\n",
 "sources": [
  {
   "publisher": "ruthex",
   "title": "RX series product datasheet: d1 insert Ø, d2 tip Ø, L, W min wall, d3 hole Ø (metric and UNC)",
   "url": "https://www.igo3d.com/mediafiles/Sonstiges/Ruthex/ruthex_Datenblatt_RX-Serie.pdf",
   "formats": [
    "PDF"
   ],
   "license": "maker's sheet; dimensions cited, nothing copied",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "heat-set-inserts",
  "heat-set-inserts-inch",
  "heat-set-insert-holes",
  "rivet-nuts-flat-head"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "insert OD / tip",
   "exact": "M2 Ø3.6 / 3.1; M2.5 4.6 / 3.9; M3 4.6 / 3.9 (5.0 / 4.25 for M3x5x4); M4 6.3 / 5.5; M5 7.1 / 6.3; M6 8.7 / 7.9; M8 10.1 / 9.5; 3/8-16 12.6 / 11.8",
   "mates": "install hole: M2 Ø3.2; M2.5 4.0; M3 4.0 (M3x5x4 4.4); M4 5.6; M5 6.4; M6 8.0; M8 9.6; inch #2-56 3.2, #4-40 4.0, #8-32 5.6, #10-24 6.4, 1/4-20 8.0, 3/8-16 11.9",
   "fit": "designed",
   "files": "insert-rx-"
  },
  {
   "feature": "depth and wall",
   "exact": "length 4.0 to 12.7; min wall 1.3 / 1.6 / 2.1 / 2.6 / 3.3 / 4.5 / 6.0",
   "mates": "blind hole at least insert length + 1 deep; wall around the hole at least W",
   "fit": "designed",
   "files": "insert-rx-"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "ruthex M3 × 5.7 hole?",
   "a": "Ø4.0 (same as CNC Kitchen's M3 × 5.7), 1.6 wall."
  }
 ],
 "files_license": null,
 "offers": [
  {
   "file": "insert-rx-m2x4",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m2x4.step",
   "stl": "https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m2x4.stl",
   "note": "ruthex RX-M2x4: M2, Ø3.6 knurl, tip Ø3.1, 4 long; print hole Ø3.2 × ≥5, wall ≥ 1.3"
  },
  {
   "file": "insert-rx-m2_5x5_7",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m2_5x5_7.step",
   "stl": "https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m2_5x5_7.stl",
   "note": "ruthex RX-M2.5x5.7: M2.5, Ø4.6 knurl, tip Ø3.9, 5.7 long; print hole Ø4 × ≥6.7, wall ≥ 1.6"
  },
  {
   "file": "insert-rx-m3sx4_0",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m3sx4_0.step",
   "stl": "https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m3sx4_0.stl",
   "note": "ruthex RX-M3Sx4.0: M3, Ø4.6 knurl, tip Ø3.9, 4 long; print hole Ø4 × ≥5, wall ≥ 1.6"
  },
  {
   "file": "insert-rx-m3x5x4",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m3x5x4.step",
   "stl": "https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m3x5x4.stl",
   "note": "ruthex RX-M3x5x4: M3, Ø5 knurl, tip Ø4.25, 4 long; print hole Ø4.4 × ≥5, wall ≥ 1.3"
  },
  {
   "file": "insert-rx-m3x5_7",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m3x5_7.step",
   "stl": "https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m3x5_7.stl",
   "note": "ruthex RX-M3x5.7: M3, Ø4.6 knurl, tip Ø3.9, 5.7 long; print hole Ø4 × ≥6.7, wall ≥ 1.6"
  },
  {
   "file": "insert-rx-m4sx4_0",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m4sx4_0.step",
   "stl": "https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m4sx4_0.stl",
   "note": "ruthex RX-M4Sx4.0: M4, Ø6.3 knurl, tip Ø5.5, 4 long; print hole Ø5.6 × ≥5, wall ≥ 2.1"
  },
  {
   "file": "insert-rx-m4x8_1",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m4x8_1.step",
   "stl": "https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m4x8_1.stl",
   "note": "ruthex RX-M4x8.1: M4, Ø6.3 knurl, tip Ø5.5, 8.1 long; print hole Ø5.6 × ≥9.1, wall ≥ 2.1"
  },
  {
   "file": "insert-rx-m5sx5_8",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m5sx5_8.step",
   "stl": "https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m5sx5_8.stl",
   "note": "ruthex RX-M5Sx5.8: M5, Ø7.1 knurl, tip Ø6.3, 5.8 long; print hole Ø6.4 × ≥6.8, wall ≥ 2.6"
  },
  {
   "file": "insert-rx-m5x9_5",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m5x9_5.step",
   "stl": "https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m5x9_5.stl",
   "note": "ruthex RX-M5x9.5: M5, Ø7.1 knurl, tip Ø6.3, 9.5 long; print hole Ø6.4 × ≥10.5, wall ≥ 2.6"
  },
  {
   "file": "insert-rx-m6x12_7",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m6x12_7.step",
   "stl": "https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m6x12_7.stl",
   "note": "ruthex RX-M6x12.7: M6, Ø8.7 knurl, tip Ø7.9, 12.7 long; print hole Ø8 × ≥13.7, wall ≥ 3.3"
  },
  {
   "file": "insert-rx-m8x12_7",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m8x12_7.step",
   "stl": "https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-m8x12_7.stl",
   "note": "ruthex RX-M8x12.7: M8, Ø10.1 knurl, tip Ø9.5, 12.7 long; print hole Ø9.6 × ≥13.7, wall ≥ 4.5"
  },
  {
   "file": "insert-rx-2-56x4",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-2-56x4.step",
   "stl": "https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-2-56x4.stl",
   "note": "ruthex RX-2-56x4: #2-56, Ø3.6 knurl, tip Ø3.1, 4 long; print hole Ø3.2 × ≥5, wall ≥ 1.3"
  },
  {
   "file": "insert-rx-4-40x5_7",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-4-40x5_7.step",
   "stl": "https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-4-40x5_7.stl",
   "note": "ruthex RX-4-40x5.7: #4-40, Ø4.6 knurl, tip Ø3.9, 5.7 long; print hole Ø4 × ≥6.7, wall ≥ 1.6"
  },
  {
   "file": "insert-rx-8-32x8_1",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-8-32x8_1.step",
   "stl": "https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-8-32x8_1.stl",
   "note": "ruthex RX-8-32x8.1: #8-32, Ø6.3 knurl, tip Ø5.5, 8.1 long; print hole Ø5.6 × ≥9.1, wall ≥ 2.1"
  },
  {
   "file": "insert-rx-10-24x9_5",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-10-24x9_5.step",
   "stl": "https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-10-24x9_5.stl",
   "note": "ruthex RX-10-24x9.5: #10-24, Ø7.1 knurl, tip Ø6.3, 9.5 long; print hole Ø6.4 × ≥10.5, wall ≥ 2.6"
  },
  {
   "file": "insert-rx-1-4-20x12_7",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-1-4-20x12_7.step",
   "stl": "https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-1-4-20x12_7.stl",
   "note": "ruthex RX-1/4-20x12.7: 1/4-20, Ø8.7 knurl, tip Ø7.9, 12.7 long; print hole Ø8 × ≥13.7, wall ≥ 3.3"
  },
  {
   "file": "insert-rx-3-8-16x12_7",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-3-8-16x12_7.step",
   "stl": "https://xemstudio.com/files/hardware/heat-set-inserts-ruthex/insert-rx-3-8-16x12_7.stl",
   "note": "ruthex RX-3/8-16x12.7: 3/8-16, Ø12.6 knurl, tip Ø11.8, 12.7 long; print hole Ø11.9 × ≥13.7, wall ≥ 6"
  }
 ],
 "markdown": "https://xemstudio.com/objects/heat-set-inserts-ruthex/index.md"
}