{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "iphone-17",
 "name": "iPhone 17",
 "kind": "modern",
 "category": "Phones, tablets & wearables",
 "group": "Other phones",
 "year": 2025,
 "question": "What are the iPhone 17 dimensions?",
 "tags": [
  "apple",
  "case",
  "dock",
  "iphone",
  "iphone 17",
  "phone",
  "cutout",
  "true shape"
 ],
 "aliases": [
  "iphone 17 size",
  "iphone 17 measurements"
 ],
 "overall_mm": {
  "length": 149.61,
  "width": 71.45,
  "height": 7.95
 },
 "official_cad": true,
 "xem_status": "free-files",
 "les": false,
 "free_files": 2,
 "url": "https://xemstudio.com/objects/iphone-17/",
 "sheet_txt": "https://xemstudio.com/objects/iphone-17/sheet.txt",
 "sheet": {
  "basis": "Apple accessory dimensional drawing (developer.apple.com/accessories); numbers transcribed, geometry built by Xem Studio",
  "overall_mm": {
   "length": 149.61,
   "width": 71.45,
   "height": 7.95
  },
  "notes": [
   "From Apple's published dimensional drawing for iPhone 17: 71.45 × 149.61 × 7.95 mm. The body file is built from the drawing's own numbers (corner-profile points, edge profile, camera and port positions): hollow it for a case, or subtract it (plus the case-cutouts file) to make a pocket, dock, tray or mount.",
   "Apple's notes for case makers: case thickness on the back 2.1 mm max; do not obstruct ports, cameras, flash or sensors; no metal contact; no magnets on the back except MagSafe.",
   "Sizes are exact nominal millimetres, true size: add your own clearance (for a printed case, typically a few tenths of a mm all round).",
   "iPhone 17: 149.6 × 71.5 × 7.95 mm (height × width × depth), 5.89 × 2.81 × 0.31 in, 177 g, 6.3 in display.",
   "The 17 Pro / Pro Max camera plateau spans the full width of the back; the Air has a full-width bar near the top; 17 and 16e keep a corner island. Depth figures exclude the camera: add about 4 mm for the Pro plateau when sizing a pocket.",
   "Case design: corner radius, Action button, Camera Control, USB-C and speaker positions are all in the Accessory Design Guidelines drawings; the overall numbers here are enough for a shelf, dock or holder with 0.5 mm clearance per side.",
   "A measured Xem scan of each body is planned: exact plateau height and lens positions are what the published drawings leave to the accessory maker.",
   "Compare with the rest of the family on the iPhone 17, iPhone Air, iPhone 17 Pro, 17 Pro Max, iPhone 16e (2025) sheet."
  ],
  "table": {
   "columns": [
    "parameter",
    "value"
   ],
   "rows": [
    [
     "width × length × thickness",
     "71.45 × 149.61 × 7.95 mm"
    ],
    [
     "front glass",
     "69.45 × 147.61 mm"
    ],
    [
     "display active area",
     "66.57 × 144.79 mm"
    ],
    [
     "corner profile points (x from side, y from top)",
     "(0, 19.23); (0.02, 14.53); (0.48, 9.87); (2.26, 5.56); (5.56, 2.26); (9.87, 0.48); (14.53, 0.02); (19.23, 0)"
    ],
    [
     "edge profile (z from mid-plane, inset)",
     "(3.93, 1.27); (3.78, 0.7); (3.39, 0.27); (2.85, 0.05); (2.27, 0); (1.69, 0)"
    ],
    [
     "back glass to camera plateau",
     "1.78 mm"
    ],
    [
     "back glass to rear camera glass",
     "3.45 mm"
    ],
    [
     "camera plateau (from the back-view datum corner)",
     "x 1.18–26.06, y 1.34–43.62 mm"
    ],
    [
     "rear camera 1 centre",
     "(13.62, 13.62) mm, Ø16"
    ],
    [
     "rear camera 2 centre",
     "(13.62, 31.34) mm, Ø16"
    ],
    [
     "flash centre",
     "(30.41, 22.48) mm, Ø6.28"
    ],
    [
     "USB-C connector keep-out",
     "12.45 × 6.6 mm, R3.25, centred 35.72 mm from the left edge"
    ],
    [
     "action button (left)",
     "centred 34.08 mm below the top, ±3.45 mm, stands 0.45 proud"
    ],
    [
     "volume up (left)",
     "centred 48.23 mm below the top, ±5.6 mm, stands 0.45 proud"
    ],
    [
     "volume down (left)",
     "centred 62.43 mm below the top, ±5.6 mm, stands 0.45 proud"
    ],
    [
     "SIM tray (left)",
     "centred 105.66 mm below the top, ±9.82 mm"
    ],
    [
     "side button (right)",
     "centred 55.32 mm below the top, ±8.85 mm, stands 0.45 proud"
    ],
    [
     "camera control (right)",
     "centred 98.2 mm below the top, ±8.55 mm"
    ],
    [
     "case thickness on the back (max)",
     "2.1 mm"
    ]
   ]
  }
 },
 "sheet_text": "iPhone 17 — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/iphone-17/  (sheet CC BY 4.0)\nBasis: Apple accessory dimensional drawing (developer.apple.com/accessories); numbers transcribed, geometry built by Xem Studio\nCatalog version: 2026-10-20\n\nOverall (mm): length 149.61, width 71.45, height 7.95\n- From Apple's published dimensional drawing for iPhone 17: 71.45 × 149.61 × 7.95 mm. The body file is built from the drawing's own numbers (corner-profile points, edge profile, camera and port positions): hollow it for a case, or subtract it (plus the case-cutouts file) to make a pocket, dock, tray or mount.\n- Apple's notes for case makers: case thickness on the back 2.1 mm max; do not obstruct ports, cameras, flash or sensors; no metal contact; no magnets on the back except MagSafe.\n- Sizes are exact nominal millimetres, true size: add your own clearance (for a printed case, typically a few tenths of a mm all round).\n- iPhone 17: 149.6 × 71.5 × 7.95 mm (height × width × depth), 5.89 × 2.81 × 0.31 in, 177 g, 6.3 in display.\n- The 17 Pro / Pro Max camera plateau spans the full width of the back; the Air has a full-width bar near the top; 17 and 16e keep a corner island. Depth figures exclude the camera: add about 4 mm for the Pro plateau when sizing a pocket.\n- Case design: corner radius, Action button, Camera Control, USB-C and speaker positions are all in the Accessory Design Guidelines drawings; the overall numbers here are enough for a shelf, dock or holder with 0.5 mm clearance per side.\n- A measured Xem scan of each body is planned: exact plateau height and lens positions are what the published drawings leave to the accessory maker.\n- Compare with the rest of the family on the iPhone 17, iPhone Air, iPhone 17 Pro, 17 Pro Max, iPhone 16e (2025) sheet.\n\nparameter  value\nwidth × length × thickness  71.45 × 149.61 × 7.95 mm\nfront glass  69.45 × 147.61 mm\ndisplay active area  66.57 × 144.79 mm\ncorner profile points (x from side, y from top)  (0, 19.23); (0.02, 14.53); (0.48, 9.87); (2.26, 5.56); (5.56, 2.26); (9.87, 0.48); (14.53, 0.02); (19.23, 0)\nedge profile (z from mid-plane, inset)  (3.93, 1.27); (3.78, 0.7); (3.39, 0.27); (2.85, 0.05); (2.27, 0); (1.69, 0)\nback glass to camera plateau  1.78 mm\nback glass to rear camera glass  3.45 mm\ncamera plateau (from the back-view datum corner)  x 1.18–26.06, y 1.34–43.62 mm\nrear camera 1 centre  (13.62, 13.62) mm, Ø16\nrear camera 2 centre  (13.62, 31.34) mm, Ø16\nflash centre  (30.41, 22.48) mm, Ø6.28\nUSB-C connector keep-out  12.45 × 6.6 mm, R3.25, centred 35.72 mm from the left edge\naction button (left)  centred 34.08 mm below the top, ±3.45 mm, stands 0.45 proud\nvolume up (left)  centred 48.23 mm below the top, ±5.6 mm, stands 0.45 proud\nvolume down (left)  centred 62.43 mm below the top, ±5.6 mm, stands 0.45 proud\nSIM tray (left)  centred 105.66 mm below the top, ±9.82 mm\nside button (right)  centred 55.32 mm below the top, ±8.85 mm, stands 0.45 proud\ncamera control (right)  centred 98.2 mm below the top, ±8.55 mm\ncase thickness on the back (max)  2.1 mm\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- Apple (official): iPhone 17 tech specs — web — Manufacturer spec page — https://support.apple.com/en-us/125089\n- Apple (official): iPhone 17 Pro tech specs — web — Manufacturer spec page — https://www.apple.com/iphone-17-pro/specs/\n- Apple (official): iPhone Air tech specs — web — Manufacturer spec page — https://www.apple.com/iphone-air/specs/\n- Apple (official): Accessory Design Guidelines for Apple Devices (dimensioned drawings of every current device) — PDF — Apple developer terms; drawings for accessory design — https://developer.apple.com/accessories/Accessory-Design-Guidelines.pdf\n- Apple: iPhone 17 dimensional drawing (Accessory Design Guidelines) — PDF — Apple's terms; linked, not hosted — https://developer.apple.com/download/files/accessories/dimensional-drawings/iphone-17.pdf\n\nFree files (CC BY 4.0, Xem Studio; STEP + STL, 2 parts): https://xemstudio.com/files/hardware/iphone-17/index.json\nAPI: https://xemstudio.com/api/geometry?object=iphone-17\n",
 "sources": [
  {
   "publisher": "Apple (official)",
   "title": "iPhone 17 tech specs",
   "url": "https://support.apple.com/en-us/125089",
   "formats": [
    "web"
   ],
   "license": "Manufacturer spec page",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Apple (official)",
   "title": "iPhone 17 Pro tech specs",
   "url": "https://www.apple.com/iphone-17-pro/specs/",
   "formats": [
    "web"
   ],
   "license": "Manufacturer spec page",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Apple (official)",
   "title": "iPhone Air tech specs",
   "url": "https://www.apple.com/iphone-air/specs/",
   "formats": [
    "web"
   ],
   "license": "Manufacturer spec page",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Apple (official)",
   "title": "Accessory Design Guidelines for Apple Devices (dimensioned drawings of every current device)",
   "url": "https://developer.apple.com/accessories/Accessory-Design-Guidelines.pdf",
   "formats": [
    "PDF"
   ],
   "license": "Apple developer terms; drawings for accessory design",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Apple",
   "title": "iPhone 17 dimensional drawing (Accessory Design Guidelines)",
   "url": "https://developer.apple.com/download/files/accessories/dimensional-drawings/iphone-17.pdf",
   "formats": [
    "PDF"
   ],
   "license": "Apple's terms; linked, not hosted",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": 8,
  "step_price_usd": 19,
  "tolerance_mm": 0.15
 },
 "related": [
  "iphone-17-family",
  "iphone-air",
  "iphone-17-pro",
  "iphone-17-pro-max",
  "iphone-16e"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [],
 "faq": [
  {
   "q": "How big is the iPhone 17 in inches?",
   "a": "5.89 × 2.81 × 0.31 in (height × width × depth); 149.6 × 71.5 × 7.95 mm."
  },
  {
   "q": "What are the iPhone 17 dimensions in mm?",
   "a": "149.6 × 71.5 × 7.95 mm, 177 g."
  }
 ],
 "files_license": null,
 "offers": [
  {
   "file": "iphone-17-body",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/iphone-17/iphone-17-body.step",
   "stl": "https://xemstudio.com/files/hardware/iphone-17/iphone-17-body.stl",
   "note": "iPhone 17 at true size: outline from Apple's corner-profile points, side profile, camera (camera plateau drawn to its dimensioned extent and clipped to the outline: its corner shape is not dimensioned)"
  },
  {
   "file": "iphone-17-case-cutouts",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/iphone-17/iphone-17-case-cutouts.step",
   "stl": "https://xemstudio.com/files/hardware/iphone-17/iphone-17-case-cutouts.stl",
   "note": "Case openings: port keep-out pushed 14 mm outward, camera plateau footprint through the back (subtract from your case)"
  }
 ],
 "markdown": "https://xemstudio.com/objects/iphone-17/index.md"
}