{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "linear-alternator-stator-2in-tube",
 "name": "Linear alternator stator outside a 2 in tube: laminated two-tooth stator, one coil",
 "kind": "hardware",
 "category": "Electronic components",
 "group": "Generators & alternators",
 "year": null,
 "question": "What linear alternator stator fits outside a 2 inch tube?",
 "tags": [
  "linear alternator",
  "stator",
  "coil",
  "free piston",
  "moving magnet",
  "tri-clamp",
  "stirling",
  "long earth society"
 ],
 "aliases": [
  "linear alternator outside tube",
  "hermetic linear alternator stirling",
  "moving magnet linear generator stator"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": true,
 "free_files": 4,
 "url": "https://xemstudio.com/objects/linear-alternator-stator-2in-tube/",
 "sheet_txt": "https://xemstudio.com/objects/linear-alternator-stator-2in-tube/sheet.txt",
 "sheet": {
  "basis": "Two-tooth moving-magnet topology (flux through the coil reverses as the magnet rows pass under the teeth); magnetic-circuit estimate with the magnets' published remanence; coil numbers from the winding window",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "The coil and its iron never touch the gas: they sit round the bored spool's 1.40 wall, which is not magnetic for this to work. Eight packs of radial laminations form two teeth on the tube and a yoke outside the coil; the flux from the S N N S magnet rows closes through one tooth, the yoke and the other, and reverses through the coil as the piston moves ±6 (the linear range: half a tooth).",
   "Estimate: gap flux density 0.42 T (magnets 1.31 T, 63 % of the carrier covered, 1.9 mm magnetic gap), 75 % of it linking the coil; dΦ/dx 0.096 Wb/m; with 300 turns of 0.71 mm wire: force constant 28.8 N/A (V·s/m), coil 3.40 Ω, inductance about 25 mH.",
   "At the design point (10 bar helium, ±5.0 mm, 45.1 Hz) it gives 40.8 V peak open circuit and 43.2 W into 11.5 Ω through a 500 µF series capacitor that cancels the coil's inductance (20 V peak across it). The load is the stroke control: never run it open-circuit.",
   "The flux in the laminations reverses at the running frequency: the plates must be thin and insulated from each other (drawn as 0.5 mm, as the pack envelope). The coil slides over S4's flange before the stack is clamped; the housing halves clamp the packs onto the tube with 4 × M4 × 20; the leads leave through the housing's hole between two packs."
  ],
  "table": {
   "columns": [
    "item",
    "value"
   ],
   "rows": [
    [
     "teeth",
     "2 × 12 wide, slot 16"
    ],
    [
     "packs",
     "8 × 43°, r 25.4–55"
    ],
    [
     "coil",
     "300 t, 0.71 mm, 3.40 Ω"
    ],
    [
     "force constant",
     "28.8 N/A"
    ],
    [
     "inductance (est.)",
     "25 mH"
    ],
    [
     "linear range",
     "±6 mm"
    ]
   ]
  }
 },
 "sheet_text": "Linear alternator stator outside a 2 in tube: laminated two-tooth stator, one coil — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/linear-alternator-stator-2in-tube/  (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/)\nBasis: Two-tooth moving-magnet topology (flux through the coil reverses as the magnet rows pass under the teeth); magnetic-circuit estimate with the magnets' published remanence; coil numbers from the winding window\nCatalog version: 2026-10-20\n\nSizes: see table below\n- The coil and its iron never touch the gas: they sit round the bored spool's 1.40 wall, which is not magnetic for this to work. Eight packs of radial laminations form two teeth on the tube and a yoke outside the coil; the flux from the S N N S magnet rows closes through one tooth, the yoke and the other, and reverses through the coil as the piston moves ±6 (the linear range: half a tooth).\n- Estimate: gap flux density 0.42 T (magnets 1.31 T, 63 % of the carrier covered, 1.9 mm magnetic gap), 75 % of it linking the coil; dΦ/dx 0.096 Wb/m; with 300 turns of 0.71 mm wire: force constant 28.8 N/A (V·s/m), coil 3.40 Ω, inductance about 25 mH.\n- At the design point (10 bar helium, ±5.0 mm, 45.1 Hz) it gives 40.8 V peak open circuit and 43.2 W into 11.5 Ω through a 500 µF series capacitor that cancels the coil's inductance (20 V peak across it). The load is the stroke control: never run it open-circuit.\n- The flux in the laminations reverses at the running frequency: the plates must be thin and insulated from each other (drawn as 0.5 mm, as the pack envelope). The coil slides over S4's flange before the stack is clamped; the housing halves clamp the packs onto the tube with 4 × M4 × 20; the leads leave through the housing's hole between two packs.\n\nitem  value\nteeth  2 × 12 wide, slot 16\npacks  8 × 43°, r 25.4–55\ncoil  300 t, 0.71 mm, 3.40 Ω\nforce constant  28.8 N/A\ninductance (est.)  25 mH\nlinear range  ±6 mm\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- K&J Magnetics: Neodymium magnet specifications: N42 Br 1.30–1.32 T, density 7.4–7.5 g/cm³ — web — maker page; values are facts [verify license at link] — https://www.kjmagnetics.com/specs.asp\n- Long Earth Society: Engine builds — web, video — LES site — https://longearthsociety.com/engineering/\n\nFree files (Xem Studio Design License, Xem Studio; STEP + STL, 4 parts): https://xemstudio.com/files/hardware/linear-alternator-stator-2in-tube/index.json\nAPI: https://xemstudio.com/api/geometry?object=linear-alternator-stator-2in-tube\n",
 "sources": [
  {
   "publisher": "K&J Magnetics",
   "title": "Neodymium magnet specifications: N42 Br 1.30–1.32 T, density 7.4–7.5 g/cm³",
   "url": "https://www.kjmagnetics.com/specs.asp",
   "formats": [
    "web"
   ],
   "license": "maker page; values are facts",
   "license_verified": false,
   "hosted": false
  },
  {
   "publisher": "Long Earth Society",
   "title": "Engine builds",
   "url": "https://longearthsociety.com/engineering/",
   "formats": [
    "web",
    "video"
   ],
   "license": "LES site",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "magnet-carrier-piston-48",
  "tri-clamp-bored-spool",
  "linear-alternator-mover"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "teeth",
   "exact": "r 25.4 (Ø50.8)",
   "mates": "S4 tube OD",
   "fit": "clamp",
   "files": "fpse-stator-pack"
  },
  {
   "feature": "OD",
   "exact": "Ø110",
   "mates": "housing bore",
   "fit": "clamp",
   "files": "fpse-stator-pack"
  },
  {
   "feature": "bobbin bore",
   "exact": "Ø65",
   "mates": "slips over S4's Ø64 flange (no contact)",
   "fit": "designed",
   "files": "fpse-bobbin"
  },
  {
   "feature": "ear holes",
   "exact": "2 × Ø4.5 each side",
   "mates": "M4 × 20 and nuts (ISO 273 medium)",
   "fit": "designed",
   "files": "fpse-stator-housing"
  },
  {
   "feature": "split",
   "exact": "1.0 total (0.5 per half)",
   "mates": "the other half",
   "fit": "clamp",
   "files": "fpse-stator-housing"
  },
  {
   "feature": "lead hole",
   "exact": "Ø6",
   "mates": "coil leads",
   "fit": "designed",
   "files": "fpse-stator-housing"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "Why outside the wall?",
   "a": "No wire through the pressure boundary and no coil in the gas: the vessel stays a sealed stack of tri-clamp parts. The price is 1.4 mm more magnetic gap than an inside coil."
  },
  {
   "q": "What sets the stroke?",
   "a": "The load. The alternator's damping absorbs the engine's power; less load (higher resistance) lets the stroke grow. Keep a load connected whenever the engine is hot."
  }
 ],
 "files_license": {
  "name": "Xem Studio Design License",
  "holder": "Xem Studio",
  "url": "https://xemstudio.com/license/",
  "note": "Xem Studio's own design: free to use, print, modify and sell things made from it; not to be republished or redistributed as files."
 },
 "offers": [
  {
   "file": "fpse-stator-pack-43deg",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/linear-alternator-stator-2in-tube/fpse-stator-pack-43deg.step",
   "stl": "https://xemstudio.com/files/hardware/linear-alternator-stator-2in-tube/fpse-stator-pack-43deg.stl",
   "note": "stator pack: 43° of radial laminations 0.5 thick, two teeth r 25.4–50 at |z| 8–20, yoke r 50–55; drawn as its envelope; 8 round the tube"
  },
  {
   "file": "fpse-bobbin-65",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/linear-alternator-stator-2in-tube/fpse-bobbin-65.step",
   "stl": "https://xemstudio.com/files/hardware/linear-alternator-stator-2in-tube/fpse-bobbin-65.stl",
   "note": "bobbin Ø65 / Ø67 × 16, flanges Ø99 × 1: slips over S4's Ø64 flanges"
  },
  {
   "file": "fpse-coil-300t",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/linear-alternator-stator-2in-tube/fpse-coil-300t.step",
   "stl": "https://xemstudio.com/files/hardware/linear-alternator-stator-2in-tube/fpse-coil-300t.stl",
   "note": "coil: 300 turns of 0.71 mm enamelled wire, the winding volume Ø67–Ø99 × 14"
  },
  {
   "file": "fpse-stator-housing-half",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/linear-alternator-stator-2in-tube/fpse-stator-housing-half.step",
   "stl": "https://xemstudio.com/files/hardware/linear-alternator-stator-2in-tube/fpse-stator-housing-half.stl",
   "note": "stator housing half: shell r 55–58, end walls to r 34, ears with 2 × M4 each side, Ø6 lead hole; two halves clamp the packs onto the tube"
  }
 ],
 "markdown": "https://xemstudio.com/objects/linear-alternator-stator-2in-tube/index.md"
}