{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "magnet-carrying-piston-48x130",
 "name": "Ø48.00 × 130 magnet-carrying piston for a honed 2 in spool",
 "kind": "hardware",
 "category": "Hardware",
 "group": "Pistons, cylinders & rods",
 "year": null,
 "question": "What magnet-carrying piston fits a honed 2 inch spool?",
 "tags": [
  "free piston",
  "piston",
  "mover",
  "linear alternator",
  "magnet",
  "tri-clamp",
  "long earth society",
  "thermoacoustic"
 ],
 "aliases": [
  "free piston mover magnets",
  "moving magnet piston 2 inch",
  "linear alternator mover tri clamp"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": true,
 "free_files": 2,
 "url": "https://xemstudio.com/objects/magnet-carrying-piston-48x130/",
 "sheet_txt": "https://xemstudio.com/objects/magnet-carrying-piston-48x130/sheet.txt",
 "sheet": {
  "basis": "Ø48.00 to the honed spool; magnet rows and pitch from the alternator design in tools/gen_ta_power.py",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "The piston and the alternator's moving part are one: a 12-sided core carries 4 rows of 12 block magnets (30 × 10 × 4, magnetised through 4), rows alternately N and S outward at 32 mm pitch, and a sleeve Ø48.00 / Ø47 slides over them and runs in the honed bore. The core is the magnets' return path, so it has to carry magnetic flux; what it and the sleeve are made of is the builder's choice within that.",
   "The crown is closed; an M4 threaded rod screws into it from inside the Ø20 bore and carries the two flexure stacks below. Moving mass with the magnets, rod and hub parts: about 1.39 kg (core and sleeve counted at 7.8 g/cm³, magnets at 7.5).",
   "Design stroke ±8 mm: the 30 mm magnet rows stay fully over their 14 mm coils that far.",
   "Fits: sleeve OD is the clearance seal in the honed bore (run); the sleeve's bore slides over the core's flanges (press); the magnets sit on the flats (bonded, designed)."
  ],
  "table": {
   "columns": [
    "feature",
    "value"
   ],
   "rows": [
    [
     "length",
     "130"
    ],
    [
     "sleeve",
     "Ø48.00 / Ø47"
    ],
    [
     "magnets",
     "4 × 12 blocks 30 × 10 × 4"
    ],
    [
     "row pitch",
     "32"
    ],
    [
     "moving mass",
     "≈ 1.39 kg"
    ],
    [
     "design stroke",
     "±8"
    ]
   ]
  }
 },
 "sheet_text": "Ø48.00 × 130 magnet-carrying piston for a honed 2 in spool — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/magnet-carrying-piston-48x130/  (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/)\nBasis: Ø48.00 to the honed spool; magnet rows and pitch from the alternator design in tools/gen_ta_power.py\nCatalog version: 2026-10-20\n\nSizes: see table below\n- The piston and the alternator's moving part are one: a 12-sided core carries 4 rows of 12 block magnets (30 × 10 × 4, magnetised through 4), rows alternately N and S outward at 32 mm pitch, and a sleeve Ø48.00 / Ø47 slides over them and runs in the honed bore. The core is the magnets' return path, so it has to carry magnetic flux; what it and the sleeve are made of is the builder's choice within that.\n- The crown is closed; an M4 threaded rod screws into it from inside the Ø20 bore and carries the two flexure stacks below. Moving mass with the magnets, rod and hub parts: about 1.39 kg (core and sleeve counted at 7.8 g/cm³, magnets at 7.5).\n- Design stroke ±8 mm: the 30 mm magnet rows stay fully over their 14 mm coils that far.\n- Fits: sleeve OD is the clearance seal in the honed bore (run); the sleeve's bore slides over the core's flanges (press); the magnets sit on the flats (bonded, designed).\n\nfeature  value\nlength  130\nsleeve  Ø48.00 / Ø47\nmagnets  4 × 12 blocks 30 × 10 × 4\nrow pitch  32\nmoving mass  ≈ 1.39 kg\ndesign stroke  ±8\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- Appl. Phys. Lett. (S. Backhaus, E. Tward, M. Petach): Traveling-wave thermoacoustic electric generator, APL 85, 1085 (2004): a thermoacoustic-Stirling engine driving linear alternators, 18 % heat to electricity — web — journal article; cited [verify license at link] — https://doi.org/10.1063/1.1781739\n- Applied Energy (Z. Wu, G. Yu, L. Zhang, W. Dai, E. Luo): Development of a 3 kW double-acting thermoacoustic Stirling electric generator, 136, 866-872 (2014): three engines and three linear alternators in a loop, 5 MPa helium, 86 Hz, 1.57 kW electric, 16.8 % — web — journal article; cited [verify license at link] — https://doi.org/10.1016/j.apenergy.2014.04.105\n- Xem Studio: tools/gen_ta_power.py: the network model and every dimension on this page — code — CC BY 4.0 — https://xemstudio.com/\n- Long Earth Society: Engine builds — web, video — LES site — https://longearthsociety.com/engineering/\n\nFree files (Xem Studio Design License, Xem Studio; STEP + STL, 2 parts): https://xemstudio.com/files/hardware/magnet-carrying-piston-48x130/index.json\nAPI: https://xemstudio.com/api/geometry?object=magnet-carrying-piston-48x130\n",
 "sources": [
  {
   "publisher": "Appl. Phys. Lett. (S. Backhaus, E. Tward, M. Petach)",
   "title": "Traveling-wave thermoacoustic electric generator, APL 85, 1085 (2004): a thermoacoustic-Stirling engine driving linear alternators, 18 % heat to electricity",
   "url": "https://doi.org/10.1063/1.1781739",
   "formats": [
    "web"
   ],
   "license": "journal article; cited",
   "license_verified": false,
   "hosted": false
  },
  {
   "publisher": "Applied Energy (Z. Wu, G. Yu, L. Zhang, W. Dai, E. Luo)",
   "title": "Development of a 3 kW double-acting thermoacoustic Stirling electric generator, 136, 866-872 (2014): three engines and three linear alternators in a loop, 5 MPa helium, 86 Hz, 1.57 kW electric, 16.8 %",
   "url": "https://doi.org/10.1016/j.apenergy.2014.04.105",
   "formats": [
    "web"
   ],
   "license": "journal article; cited",
   "license_verified": false,
   "hosted": false
  },
  {
   "publisher": "Xem Studio",
   "title": "tools/gen_ta_power.py: the network model and every dimension on this page",
   "url": "https://xemstudio.com/",
   "formats": [
    "code"
   ],
   "license": "CC BY 4.0",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Long Earth Society",
   "title": "Engine builds",
   "url": "https://longearthsociety.com/engineering/",
   "formats": [
    "web",
    "video"
   ],
   "license": "LES site",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "tri-clamp-honed-cylinder-spool",
  "canned-linear-alternator-stator-2in",
  "neodymium-block-magnets",
  "tri-clamp-flexure-carrier"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "sleeve outside",
   "exact": "Ø48.00 × 130",
   "mates": "honed spool bore Ø48.00: clearance seal",
   "fit": "run",
   "files": "mover-sleeve-"
  },
  {
   "feature": "sleeve bore",
   "exact": "Ø47.00",
   "mates": "mover core end flanges Ø47.00",
   "fit": "press",
   "files": "all"
  },
  {
   "feature": "flats",
   "exact": "12 × 10 wide on r 18.66, 4 rows of 30 at 32 pitch",
   "mates": "block magnets 30 × 10 × 4 (bonded)",
   "fit": "designed",
   "files": "mover-core-"
  },
  {
   "feature": "crown hole",
   "exact": "Ø3.3 × 6 (M4 tap drill) from the Ø20 bore",
   "mates": "M4 threaded rod",
   "fit": "designed",
   "files": "mover-core-"
  },
  {
   "feature": "core bore",
   "exact": "Ø20 from the bottom face to the crown",
   "mates": "M4 rod (no contact)",
   "fit": "designed",
   "files": "mover-core-"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "Where is the rod?",
   "a": "Inside: it screws into the crown from the bore and leaves through the bottom to the flexures. Nothing crosses the pressure wall."
  },
  {
   "q": "Why a sleeve?",
   "a": "The magnets cannot be the running surface; the sleeve is, finished to the clearance-seal fit."
  }
 ],
 "files_license": {
  "name": "Xem Studio Design License",
  "holder": "Xem Studio",
  "url": "https://xemstudio.com/license/",
  "note": "Xem Studio's own design: free to use, print, modify and sell things made from it; not to be republished or redistributed as files."
 },
 "offers": [
  {
   "file": "mover-core-2in-130",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/magnet-carrying-piston-48x130/mover-core-2in-130.step",
   "stl": "https://xemstudio.com/files/hardware/magnet-carrying-piston-48x130/mover-core-2in-130.stl",
   "note": "mover core, 130 long: 12-sided body (flats r 18.66) between Ø47 × 2 end flanges, Ø20 bore from the bottom to an 8 mm crown, M4 tap drill Ø3.3 × 6 in the crown"
  },
  {
   "file": "mover-sleeve-48x130",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/magnet-carrying-piston-48x130/mover-sleeve-48x130.step",
   "stl": "https://xemstudio.com/files/hardware/magnet-carrying-piston-48x130/mover-sleeve-48x130.stl",
   "note": "mover sleeve Ø48.00 / Ø47 × 130: the running surface"
  }
 ],
 "markdown": "https://xemstudio.com/objects/magnet-carrying-piston-48x130/index.md"
}