{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "neodymium-disc-magnets",
 "name": "Neodymium disc magnets, common sizes",
 "kind": "hardware",
 "category": "Hardware",
 "group": "Magnets, plates & discs",
 "year": null,
 "question": "What pocket size do 6×3 and 10×3 magnets need in a 3D print?",
 "tags": [
  "magnet",
  "closure",
  "lid",
  "stirling",
  "long earth society"
 ],
 "aliases": [
  "6x3 magnet",
  "10x3 magnet",
  "neodymium magnet",
  "n52 magnet",
  "magnet pocket"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": true,
 "free_files": 6,
 "url": "https://xemstudio.com/objects/neodymium-disc-magnets/",
 "sheet_txt": "https://xemstudio.com/objects/neodymium-disc-magnets/sheet.txt",
 "sheet": {
  "basis": "standard disc sizes; nominal, N35–N52 share dimensions",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "Common sizes: Ø6 × 3, Ø8 × 3, Ø10 × 3, Ø12 × 3, Ø5 × 2, Ø3 × 1 mm (tolerance about ±0.1 mm).",
   "Magnet pockets are drawn at the magnet's diameter and thickness. A 0.5 mm floor between magnet and the mating part keeps pull strong and the surface smooth.",
   "Polarity: mark north on the pair before gluing."
  ],
  "table": {
   "columns": [
    "size",
    "dia_mm",
    "thick_mm",
    "press_fit_hole_mm",
    "glue_hole_mm"
   ],
   "rows": [
    [
     "3x1",
     3,
     1,
     3.15,
     3.4
    ],
    [
     "5x2",
     5,
     2,
     5.15,
     5.4
    ],
    [
     "6x3",
     6,
     3,
     6.15,
     6.4
    ],
    [
     "8x3",
     8,
     3,
     8.15,
     8.4
    ],
    [
     "10x3",
     10,
     3,
     10.2,
     10.4
    ],
    [
     "12x3",
     12,
     3,
     12.2,
     12.4
    ]
   ]
  }
 },
 "sheet_text": "Neodymium disc magnets, common sizes — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/neodymium-disc-magnets/  (sheet CC BY 4.0)\nBasis: standard disc sizes; nominal, N35–N52 share dimensions\nCatalog version: 2026-10-20\n\nSizes: see table below\n- Common sizes: Ø6 × 3, Ø8 × 3, Ø10 × 3, Ø12 × 3, Ø5 × 2, Ø3 × 1 mm (tolerance about ±0.1 mm).\n- Magnet pockets are drawn at the magnet's diameter and thickness. A 0.5 mm floor between magnet and the mating part keeps pull strong and the surface smooth.\n- Polarity: mark north on the pair before gluing.\n\nsize  dia_mm  thick_mm  press_fit_hole_mm  glue_hole_mm\n3x1  3  1  3.15  3.4\n5x2  5  2  5.15  5.4\n6x3  6  3  6.15  6.4\n8x3  8  3  8.15  8.4\n10x3  10  3  10.2  10.4\n12x3  12  3  12.2  12.4\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- McMaster-Carr: Magnets (free STEP/IGES/STL per part, for your own design use; no redistribution) — STEP, IGES, STL, PDF — McMaster-Carr site terms: personal design use, no redistribution [verify license at link] — https://www.mcmaster.com/products/magnets/\n- Wikipedia: Neodymium magnet — web — CC BY-SA 4.0 (text) — https://en.wikipedia.org/wiki/Neodymium_magnet\n\nFree files (CC BY 4.0, Xem Studio; STEP + STL, 6 parts): https://xemstudio.com/files/hardware/neodymium-disc-magnets/index.json\nAPI: https://xemstudio.com/api/geometry?object=neodymium-disc-magnets\n",
 "sources": [
  {
   "publisher": "McMaster-Carr",
   "title": "Magnets (free STEP/IGES/STL per part, for your own design use; no redistribution)",
   "url": "https://www.mcmaster.com/products/magnets/",
   "formats": [
    "STEP",
    "IGES",
    "STL",
    "PDF"
   ],
   "license": "McMaster-Carr site terms: personal design use, no redistribution",
   "license_verified": false,
   "hosted": false
  },
  {
   "publisher": "Wikipedia",
   "title": "Neodymium magnet",
   "url": "https://en.wikipedia.org/wiki/Neodymium_magnet",
   "formats": [
    "web"
   ],
   "license": "CC BY-SA 4.0 (text)",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "heat-set-inserts",
  "dowel-pins-metric"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "disc",
   "exact": "Ø × t (3×1 … 12×3)",
   "mates": "magnet pocket",
   "fit": "press",
   "files": "magnet-"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "What hole size for a 6x3 mm magnet in a 3D print?",
   "a": "Draw the pocket Ø6 × 3 deep and apply your press allowance to its diameter. Leave a 0.5 mm floor between the magnet and the mating face."
  },
  {
   "q": "What size pocket for an 8x3 and 10x3 neodymium magnet?",
   "a": "8×3: 8.15 mm press / 8.4 mm glue. 10×3: 10.15 mm press / 10.4 mm glue. Tolerance on the magnets is about ±0.1 mm."
  },
  {
   "q": "How strong is a 6x3 mm N52 magnet?",
   "a": "Roughly 1 kg pull against mild steel in direct contact; through a 0.5 mm printed floor expect about half that. Pair magnets north-to-south and mark polarity before gluing."
  }
 ],
 "files_license": null,
 "offers": [
  {
   "file": "magnet-3x1",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/neodymium-disc-magnets/magnet-3x1.step",
   "stl": "https://xemstudio.com/files/hardware/neodymium-disc-magnets/magnet-3x1.stl",
   "note": "disc Ø3 × 1"
  },
  {
   "file": "magnet-5x2",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/neodymium-disc-magnets/magnet-5x2.step",
   "stl": "https://xemstudio.com/files/hardware/neodymium-disc-magnets/magnet-5x2.stl",
   "note": "disc Ø5 × 2"
  },
  {
   "file": "magnet-6x3",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/neodymium-disc-magnets/magnet-6x3.step",
   "stl": "https://xemstudio.com/files/hardware/neodymium-disc-magnets/magnet-6x3.stl",
   "note": "disc Ø6 × 3"
  },
  {
   "file": "magnet-8x3",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/neodymium-disc-magnets/magnet-8x3.step",
   "stl": "https://xemstudio.com/files/hardware/neodymium-disc-magnets/magnet-8x3.stl",
   "note": "disc Ø8 × 3"
  },
  {
   "file": "magnet-10x3",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/neodymium-disc-magnets/magnet-10x3.step",
   "stl": "https://xemstudio.com/files/hardware/neodymium-disc-magnets/magnet-10x3.stl",
   "note": "disc Ø10 × 3"
  },
  {
   "file": "magnet-12x3",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/neodymium-disc-magnets/magnet-12x3.step",
   "stl": "https://xemstudio.com/files/hardware/neodymium-disc-magnets/magnet-12x3.stl",
   "note": "disc Ø12 × 3"
  }
 ],
 "markdown": "https://xemstudio.com/objects/neodymium-disc-magnets/index.md"
}