{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "nyloc-nuts-metric",
 "name": "Nyloc lock nuts, M2.5–M8 (DIN 985)",
 "kind": "hardware",
 "category": "Hardware",
 "group": "Fasteners",
 "year": null,
 "question": "How thick is an M3 nyloc nut?",
 "tags": [
  "nut",
  "lock nut",
  "nyloc",
  "fastener"
 ],
 "aliases": [
  "nyloc nut",
  "nylock",
  "lock nut",
  "din 985",
  "m3 lock nut"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": false,
 "free_files": 6,
 "url": "https://xemstudio.com/objects/nyloc-nuts-metric/",
 "sheet_txt": "https://xemstudio.com/objects/nyloc-nuts-metric/sheet.txt",
 "sheet": {
  "basis": "DIN 985 / ISO 10511 (thin type is lower; values are the common DIN 985)",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "Same across-flats as a plain nut, taller because of the nylon collar: M3 is 4.0 mm vs 2.4 mm plain. A nut pocket is the AF and the full height (see Mating features).",
   "Not reusable more than a few times; don't rely on them on a printed part that will be opened often."
  ],
  "table": {
   "columns": [
    "thread",
    "width_af_mm",
    "height_mm"
   ],
   "rows": [
    [
     "M2.5",
     5,
     2.9
    ],
    [
     "M3",
     5.5,
     4
    ],
    [
     "M4",
     7,
     5
    ],
    [
     "M5",
     8,
     5
    ],
    [
     "M6",
     10,
     6
    ],
    [
     "M8",
     13,
     8
    ]
   ]
  }
 },
 "sheet_text": "Nyloc lock nuts, M2.5–M8 (DIN 985) — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/nyloc-nuts-metric/  (sheet CC BY 4.0)\nBasis: DIN 985 / ISO 10511 (thin type is lower; values are the common DIN 985)\nCatalog version: 2026-10-20\n\nSizes: see table below\n- Same across-flats as a plain nut, taller because of the nylon collar: M3 is 4.0 mm vs 2.4 mm plain. A nut pocket is the AF and the full height (see Mating features).\n- Not reusable more than a few times; don't rely on them on a printed part that will be opened often.\n\nthread  width_af_mm  height_mm\nM2.5  5.0  2.9\nM3  5.5  4.0\nM4  7.0  5.0\nM5  8.0  5.0\nM6  10.0  6.0\nM8  13.0  8.0\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- McMaster-Carr: Nylon-insert locknuts (free STEP/IGES/STL per part, for your own design use; no redistribution) — STEP, IGES, STL, PDF — McMaster-Carr site terms: personal design use, no redistribution [verify license at link] — https://www.mcmaster.com/products/nylon-insert-locknuts/\n- Wikipedia: Nyloc nut — web — CC BY-SA 4.0 (text) — https://en.wikipedia.org/wiki/Nyloc_nut\n\nFree files (CC BY 4.0, Xem Studio; STEP + STL, 6 parts): https://xemstudio.com/files/hardware/nyloc-nuts-metric/index.json\nAPI: https://xemstudio.com/api/geometry?object=nyloc-nuts-metric\n",
 "sources": [
  {
   "publisher": "McMaster-Carr",
   "title": "Nylon-insert locknuts (free STEP/IGES/STL per part, for your own design use; no redistribution)",
   "url": "https://www.mcmaster.com/products/nylon-insert-locknuts/",
   "formats": [
    "STEP",
    "IGES",
    "STL",
    "PDF"
   ],
   "license": "McMaster-Carr site terms: personal design use, no redistribution",
   "license_verified": false,
   "hosted": false
  },
  {
   "publisher": "Wikipedia",
   "title": "Nyloc nut",
   "url": "https://en.wikipedia.org/wiki/Nyloc_nut",
   "formats": [
    "web"
   ],
   "license": "CC BY-SA 4.0 (text)",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "hex-nuts-metric",
  "socket-head-cap-screws-metric",
  "flat-washers-metric",
  "nylon-insert-lock-nuts-iso-7040-din-985",
  "nylon-insert-lock-nuts-inch-asme-b18-16-6",
  "prevailing-torque-all-metal-nuts"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "hex",
   "exact": "AF × h (M3 5.5 × 4.0)",
   "mates": "nut pocket",
   "fit": "press",
   "files": "nyloc-"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "How tall is an M3 nyloc nut?",
   "a": "4.0 mm (5.5 mm across flats); an M4 is 5.0 mm (7 AF), M5 5.0 mm (8 AF), M6 6.0 mm (10 AF), M8 8.0 mm (13 AF)."
  },
  {
   "q": "Can I print a pocket for a nyloc nut?",
   "a": "Yes: the exact pocket is the nut's across-flats (5.5 mm for M3) and full height (4.0 mm); apply your process allowance to it. The nylon collar must face away from the screw entry."
  }
 ],
 "files_license": null,
 "offers": [
  {
   "file": "nyloc-m2.5",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/nyloc-nuts-metric/nyloc-m2.5.step",
   "stl": "https://xemstudio.com/files/hardware/nyloc-nuts-metric/nyloc-m2.5.stl",
   "note": "DIN 985 M2.5, 5.0 AF × 2.9 high"
  },
  {
   "file": "nyloc-m3",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/nyloc-nuts-metric/nyloc-m3.step",
   "stl": "https://xemstudio.com/files/hardware/nyloc-nuts-metric/nyloc-m3.stl",
   "note": "DIN 985 M3, 5.5 AF × 4.0 high"
  },
  {
   "file": "nyloc-m4",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/nyloc-nuts-metric/nyloc-m4.step",
   "stl": "https://xemstudio.com/files/hardware/nyloc-nuts-metric/nyloc-m4.stl",
   "note": "DIN 985 M4, 7.0 AF × 5.0 high"
  },
  {
   "file": "nyloc-m5",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/nyloc-nuts-metric/nyloc-m5.step",
   "stl": "https://xemstudio.com/files/hardware/nyloc-nuts-metric/nyloc-m5.stl",
   "note": "DIN 985 M5, 8.0 AF × 5.0 high"
  },
  {
   "file": "nyloc-m6",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/nyloc-nuts-metric/nyloc-m6.step",
   "stl": "https://xemstudio.com/files/hardware/nyloc-nuts-metric/nyloc-m6.stl",
   "note": "DIN 985 M6, 10.0 AF × 6.0 high"
  },
  {
   "file": "nyloc-m8",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/nyloc-nuts-metric/nyloc-m8.step",
   "stl": "https://xemstudio.com/files/hardware/nyloc-nuts-metric/nyloc-m8.stl",
   "note": "DIN 985 M8, 13.0 AF × 8.0 high"
  }
 ],
 "markdown": "https://xemstudio.com/objects/nyloc-nuts-metric/index.md"
}