{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "plain-rods-2-3mm",
 "name": "Plain rods Ø2 and Ø3, 60 to 350 mm",
 "kind": "hardware",
 "category": "Hardware",
 "group": "Pistons, cylinders & rods",
 "year": null,
 "question": "What lengths of 2 and 3 mm rod are drawn exact?",
 "tags": [
  "displacer rod",
  "rod",
  "2 mm",
  "3 mm",
  "stirling",
  "long earth society"
 ],
 "aliases": [
  "stirling displacer rod",
  "3mm displacer rod length",
  "displacer rod diameter",
  "3mm rod step file",
  "2mm displacer rod"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": true,
 "free_files": 9,
 "url": "https://xemstudio.com/objects/plain-rods-2-3mm/",
 "sheet_txt": "https://xemstudio.com/objects/plain-rods-2-3mm/sheet.txt",
 "sheet": {
  "basis": "Solid rods at the bore Ø of the parts they pass through: Ø3 for the tri-clamp heads, Ø2 for the can-engine cap and LTD top plate",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "Solid rods with 0.3 chamfers at both ends, plain round, no flat: Ø3 × 100, 150, 200, 300 and 350, and Ø2 × 60, 78, 100 and 180.",
   "On the tri-clamp engines the rod runs from the displacer cap's socket (M3 grub) up through the head's Ø3 bore, which is its guide and seal, to the rod clevis.",
   "Rod length = displacer cap to clevis plus the stroke.",
   "On the can engine and the LTD engines the Ø2 rod runs through the Ø2 bore in the can cap or the LTD top plate, from the displacer (flush with its underside) to the rod-clevis-2mm: 180 on the can engine, 76 on the Ø100 LTD.",
   "On the rhombic and free-piston engines the same Ø3 rod runs up the inside of the Ø5 tube piston rod (Ø3.4 bore)."
  ],
  "table": {
   "columns": [
    "file",
    "Ø",
    "length"
   ],
   "rows": [
    [
     "rod-2x60",
     2,
     60
    ],
    [
     "rod-2x76",
     2,
     78
    ],
    [
     "rod-2x100",
     2,
     100
    ],
    [
     "rod-2x180",
     2,
     180
    ],
    [
     "rod-3x100",
     3,
     100
    ],
    [
     "rod-3x150",
     3,
     150
    ],
    [
     "rod-3x200",
     3,
     200
    ],
    [
     "rod-3x300",
     3,
     300
    ],
    [
     "rod-3x350",
     3,
     350
    ]
   ]
  }
 },
 "sheet_text": "Plain rods Ø2 and Ø3, 60 to 350 mm — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/plain-rods-2-3mm/  (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/)\nBasis: Solid rods at the bore Ø of the parts they pass through: Ø3 for the tri-clamp heads, Ø2 for the can-engine cap and LTD top plate\nCatalog version: 2026-10-20\n\nSizes: see table below\n- Solid rods with 0.3 chamfers at both ends, plain round, no flat: Ø3 × 100, 150, 200, 300 and 350, and Ø2 × 60, 78, 100 and 180.\n- On the tri-clamp engines the rod runs from the displacer cap's socket (M3 grub) up through the head's Ø3 bore, which is its guide and seal, to the rod clevis.\n- Rod length = displacer cap to clevis plus the stroke.\n- On the can engine and the LTD engines the Ø2 rod runs through the Ø2 bore in the can cap or the LTD top plate, from the displacer (flush with its underside) to the rod-clevis-2mm: 180 on the can engine, 76 on the Ø100 LTD.\n- On the rhombic and free-piston engines the same Ø3 rod runs up the inside of the Ø5 tube piston rod (Ø3.4 bore).\n\nfile  Ø  length\nrod-2x60  2  60\nrod-2x76  2  78\nrod-2x100  2  100\nrod-2x180  2  180\nrod-3x100  3  100\nrod-3x150  3  150\nrod-3x200  3  200\nrod-3x300  3  300\nrod-3x350  3  350\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- Long Earth Society: Engine builds — web, video — LES site — https://longearthsociety.com/engineering/\n\nFree files (Xem Studio Design License, Xem Studio; STEP + STL, 9 parts): https://xemstudio.com/files/hardware/plain-rods-2-3mm/index.json\nAPI: https://xemstudio.com/api/geometry?object=plain-rods-2-3mm\n",
 "sources": [
  {
   "publisher": "Long Earth Society",
   "title": "Engine builds",
   "url": "https://longearthsociety.com/engineering/",
   "formats": [
    "web",
    "video"
   ],
   "license": "LES site",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "rod-clevises",
  "tri-clamp-hollow-pistons",
  "tube-piston-rods-5mm",
  "d-flat-crankshafts-3-5-8",
  "can-top-caps",
  "round-top-plates-syringe-socket"
 ],
 "fits": [
  {
   "role": "Goes in or on",
   "items": [
    {
     "slug": "tri-clamp-hollow-pistons",
     "why": "Ø3 rod in the displacer cap socket and the head's Ø3 bore"
    },
    {
     "slug": "tube-piston-rods-5mm",
     "why": "runs inside the Ø3.4 bore"
    },
    {
     "slug": "can-top-caps",
     "why": "Ø2 rod in the cap's Ø2 bore"
    },
    {
     "slug": "round-top-plates-syringe-socket",
     "why": "Ø2 rod in the top plate's Ø2 bore"
    }
   ]
  },
  {
   "role": "Connects to",
   "items": [
    {
     "slug": "rod-clevises",
     "why": "Ø3 socket with M3 grub"
    }
   ]
  }
 ],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "shafts, rods, pins",
   "exact": "Ø3 / Ø5 / Ø8",
   "mates": "the bores listed on each mating object",
   "fit": "slide",
   "files": "all"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "What diameter is the displacer rod?",
   "a": "Ø3 on the tri-clamp engines, where it slides in the head's Ø3 bore and seats in the displacer cap and rod clevis sockets. Ø2 on the can engine and LTD engines, through the Ø2 bore in the cap or top plate."
  },
  {
   "q": "How long should the displacer rod be?",
   "a": "Displacer cap to rod clevis plus the stroke; the files are 100, 150 and 200 long."
  }
 ],
 "files_license": {
  "name": "Xem Studio Design License",
  "holder": "Xem Studio",
  "url": "https://xemstudio.com/license/",
  "note": "Xem Studio's own design: free to use, print, modify and sell things made from it; not to be republished or redistributed as files."
 },
 "offers": [
  {
   "file": "rod-3x100",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/plain-rods-2-3mm/rod-3x100.step",
   "stl": "https://xemstudio.com/files/hardware/plain-rods-2-3mm/rod-3x100.stl",
   "note": "Ø3 × 100 solid rod: displacer rod (into the displacer cap's grub, through the head's Ø3 bore and the piston crown, into the rod clevis)"
  },
  {
   "file": "rod-3x150",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/plain-rods-2-3mm/rod-3x150.step",
   "stl": "https://xemstudio.com/files/hardware/plain-rods-2-3mm/rod-3x150.stl",
   "note": "Ø3 × 150 solid rod: displacer rod (into the displacer cap's grub, through the head's Ø3 bore and the piston crown, into the rod clevis)"
  },
  {
   "file": "rod-3x200",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/plain-rods-2-3mm/rod-3x200.step",
   "stl": "https://xemstudio.com/files/hardware/plain-rods-2-3mm/rod-3x200.stl",
   "note": "Ø3 × 200 solid rod: displacer rod (into the displacer cap's grub, through the head's Ø3 bore and the piston crown, into the rod clevis)"
  },
  {
   "file": "rod-3x300",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/plain-rods-2-3mm/rod-3x300.step",
   "stl": "https://xemstudio.com/files/hardware/plain-rods-2-3mm/rod-3x300.stl",
   "note": "Ø3 × 300 solid rod: displacer rod (into the displacer cap's grub, through the head's Ø3 bore and the piston crown, into the rod clevis)"
  },
  {
   "file": "rod-3x350",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/plain-rods-2-3mm/rod-3x350.step",
   "stl": "https://xemstudio.com/files/hardware/plain-rods-2-3mm/rod-3x350.stl",
   "note": "Ø3 × 350 solid rod: displacer rod (into the displacer cap's grub, through the head's Ø3 bore and the piston crown, into the rod clevis)"
  },
  {
   "file": "rod-2x60",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/plain-rods-2-3mm/rod-2x60.step",
   "stl": "https://xemstudio.com/files/hardware/plain-rods-2-3mm/rod-2x60.stl",
   "note": "Ø2 × 60 solid rod: displacer rod for the can and LTD engines (through the Ø2 bore in the can cap or LTD top plate; 76 is the LTD's, 180 the can engine's, displacer to rod clevis)"
  },
  {
   "file": "rod-2x76",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/plain-rods-2-3mm/rod-2x76.step",
   "stl": "https://xemstudio.com/files/hardware/plain-rods-2-3mm/rod-2x76.stl",
   "note": "Ø2 × 76 solid rod: displacer rod for the can and LTD engines (through the Ø2 bore in the can cap or LTD top plate; 76 is the LTD's, 180 the can engine's, displacer to rod clevis)"
  },
  {
   "file": "rod-2x100",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/plain-rods-2-3mm/rod-2x100.step",
   "stl": "https://xemstudio.com/files/hardware/plain-rods-2-3mm/rod-2x100.stl",
   "note": "Ø2 × 100 solid rod: displacer rod for the can and LTD engines (through the Ø2 bore in the can cap or LTD top plate; 76 is the LTD's, 180 the can engine's, displacer to rod clevis)"
  },
  {
   "file": "rod-2x180",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/plain-rods-2-3mm/rod-2x180.step",
   "stl": "https://xemstudio.com/files/hardware/plain-rods-2-3mm/rod-2x180.stl",
   "note": "Ø2 × 180 solid rod: displacer rod for the can and LTD engines (through the Ø2 bore in the can cap or LTD top plate; 76 is the LTD's, 180 the can engine's, displacer to rod clevis)"
  }
 ],
 "markdown": "https://xemstudio.com/objects/plain-rods-2-3mm/index.md"
}