{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "plate-cam-knife-follower-mechanism",
 "name": "Plate cam with knife-edge follower (simple harmonic rise)",
 "kind": "hardware",
 "category": "Mechanisms",
 "group": "Cams",
 "year": null,
 "question": "How does a plate cam with a knife-edge follower work?",
 "tags": [
  "mechanism",
  "cams",
  "kinematics",
  "507 mechanical movements"
 ],
 "aliases": [
  "knife-edge follower cam",
  "cam and follower",
  "harmonic cam profile",
  "leva de disco con seguidor de filo",
  "Kurvenscheibe mit Schneidenstößel"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": false,
 "free_files": 1,
 "url": "https://xemstudio.com/objects/plate-cam-knife-follower-mechanism/",
 "sheet_txt": "https://xemstudio.com/objects/plate-cam-knife-follower-mechanism/sheet.txt",
 "sheet": {
  "basis": "Xem Studio design following Brown No. 136 (1868)",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "Resize: multiply every length by one factor k and the motion stays identical: angles, ratios, timing and the formulas below do not change, because a mechanism's motion depends only on the ratios of its lengths. Here, scales with k: base circle; stays the same: rise, law, pose.",
   "Resize: Scale base radius and lift together: the motion law and the pressure angle stay the same. Raising lift alone steepens the pressure angle and the follower can jam.",
   "Resize: fit clearances stay in mm (a slide fit is the same gap at any size); keep every printed wall and pin at least two nozzle widths; mass grows with k³ but part strength only with k², so at k = 2 parts are about 8× heavier and 4× stronger: check pins and thin links when scaling up.",
   "A disc cam turning on its shaft lifts a knife-edge follower that slides in a straight guide: the profile is drawn from the displacement law — here simple harmonic rise of 12 mm over 120°, dwell, return, dwell.",
   "Knife-edge: simplest, exact on any convex profile, but high wear; it is the follower of Brown's cam wheel (No. 136).",
   "Drawn at 60° of cam rotation (mid-rise, lift 6 mm) with the follower touching the profile; follower guide 30 × 16 block. Brown's No. 136.",
   "Parts (each has its own page): plate-cam-harmonic-knife-r20-h12, knife-edge-follower-8, follower-guide-block-8.",
   "Brown's movement No. 136 (1868) shows it; this model is a Xem Studio design following his figure, every part at true size."
  ],
  "table": {
   "columns": [
    "parameter",
    "value"
   ],
   "rows": [
    [
     "base circle",
     "R20"
    ],
    [
     "rise",
     "12 mm / 120°"
    ],
    [
     "law",
     "simple harmonic"
    ],
    [
     "follower",
     "knife-edge"
    ],
    [
     "pose",
     "60°, lift 6 mm"
    ]
   ]
  }
 },
 "sheet_text": "Plate cam with knife-edge follower (simple harmonic rise) — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/plate-cam-knife-follower-mechanism/  (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/)\nBasis: Xem Studio design following Brown No. 136 (1868)\nCatalog version: 2026-10-20\n\nSizes: see table below\n- Resize: multiply every length by one factor k and the motion stays identical: angles, ratios, timing and the formulas below do not change, because a mechanism's motion depends only on the ratios of its lengths. Here, scales with k: base circle; stays the same: rise, law, pose.\n- Resize: Scale base radius and lift together: the motion law and the pressure angle stay the same. Raising lift alone steepens the pressure angle and the follower can jam.\n- Resize: fit clearances stay in mm (a slide fit is the same gap at any size); keep every printed wall and pin at least two nozzle widths; mass grows with k³ but part strength only with k², so at k = 2 parts are about 8× heavier and 4× stronger: check pins and thin links when scaling up.\n- A disc cam turning on its shaft lifts a knife-edge follower that slides in a straight guide: the profile is drawn from the displacement law — here simple harmonic rise of 12 mm over 120°, dwell, return, dwell.\n- Knife-edge: simplest, exact on any convex profile, but high wear; it is the follower of Brown's cam wheel (No. 136).\n- Drawn at 60° of cam rotation (mid-rise, lift 6 mm) with the follower touching the profile; follower guide 30 × 16 block. Brown's No. 136.\n- Parts (each has its own page): plate-cam-harmonic-knife-r20-h12, knife-edge-follower-8, follower-guide-block-8.\n- Brown's movement No. 136 (1868) shows it; this model is a Xem Studio design following his figure, every part at true size.\n\nparameter  value\nbase circle  R20\nrise  12 mm / 120°\nlaw  simple harmonic\nfollower  knife-edge\npose  60°, lift 6 mm\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- Henry T. Brown (1868, public domain): Five Hundred and Seven Mechanical Movements — scan on archive.org — web — Publisher's page; dimensions are facts — https://archive.org/details/fivehundredseven00browiala\n- 507movements.com: Brown's movement No. 136: figure, his text and an animation — web — Publisher's page; dimensions are facts — https://507movements.com/mm_136.html\n\nFree files (Xem Studio Design License, Xem Studio; STEP + STL, 1 parts): https://xemstudio.com/files/hardware/plate-cam-knife-follower-mechanism/index.json\nAPI: https://xemstudio.com/api/geometry?object=plate-cam-knife-follower-mechanism\n",
 "sources": [
  {
   "publisher": "Henry T. Brown (1868, public domain)",
   "title": "Five Hundred and Seven Mechanical Movements — scan on archive.org",
   "url": "https://archive.org/details/fivehundredseven00browiala",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "507movements.com",
   "title": "Brown's movement No. 136: figure, his text and an animation",
   "url": "https://507movements.com/mm_136.html",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "plate-cam-harmonic-knife-r20-h12",
  "knife-edge-follower-8",
  "follower-guide-block-8"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [],
 "faq": [
  {
   "q": "How does a plate cam with a knife-edge follower work?",
   "a": "A disc cam turning on its shaft lifts a knife-edge follower that slides in a straight guide: the profile is drawn from the displacement law — here simple harmonic rise of 12 mm over 120°, dwell, return, dwell."
  }
 ],
 "files_license": {
  "name": "Xem Studio Design License",
  "holder": "Xem Studio",
  "url": "https://xemstudio.com/license/",
  "note": "Xem Studio's own design: free to use, print, modify and sell things made from it; not to be republished or redistributed as files."
 },
 "offers": [
  {
   "file": "plate-cam-knife-follower-mechanism-assembly",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/plate-cam-knife-follower-mechanism/plate-cam-knife-follower-mechanism-assembly.step",
   "stl": "https://xemstudio.com/files/hardware/plate-cam-knife-follower-mechanism/plate-cam-knife-follower-mechanism-assembly.stl",
   "note": "Assembled mechanism, all parts placed at one pose (STEP keeps each part separate)"
  }
 ],
 "markdown": "https://xemstudio.com/objects/plate-cam-knife-follower-mechanism/index.md"
}