{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "printable-tri-clamp-lids-caps",
 "name": "Printable tri-clamp (45°): dome lids and ported caps",
 "kind": "hardware",
 "category": "3D printable tri-clamp",
 "group": "Caps, lids & ports",
 "year": null,
 "question": "Can I 3D print a tri-clamp lid with ports?",
 "tags": [
  "lid",
  "dome",
  "cap",
  "3d printable",
  "supportless",
  "print friendly",
  "45 degree",
  "stl",
  "sanitary",
  "tri-clamp",
  "clamp fitting",
  "brewing",
  "homebrew"
 ],
 "aliases": [
  "printable tri clamp lid",
  "3d printed fermenter lid tri clamp",
  "3d printed tri clamp",
  "3d printable tri clamp",
  "tri clamp stl",
  "printable tri clover"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": false,
 "free_files": 16,
 "url": "https://xemstudio.com/objects/printable-tri-clamp-lids-caps/",
 "sheet_txt": "https://xemstudio.com/objects/printable-tri-clamp-lids-caps/sheet.txt",
 "sheet": {
  "basis": "Xem Studio design: the dome lids and ported caps of the standard pages with 45° rims",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "3D-printable tri-clamp: this is Xem Studio's print-friendly version of the standard sanitary fitting, drawn so it prints on an ordinary FDM or resin printer with no supports. Download the STL to print it, or the STEP to edit it. The files are true size (no printing allowance): add your own clearance in the slicer or CAD if your printer needs it.",
   "Lids print face down; the dome and ports grow up from the face.",
   "Printable tri-clamp: the ISO 2852 face and gasket groove are exactly standard, only the back cone behind each rim is 45° instead of 20°, so no rim overhangs more than 45° from vertical in any print orientation. Join these with the 45° clamps (printable-tri-clamp-clamps) and standard Type B gaskets; a 45° clamp fits only 45° rims, so keep a run all 45°. A 45° cone turns clamp force into face force at 1 : 1 (a 20° cone at 2.7 : 1), so tighten the clamp bolts harder or use M6.",
   "Print orientation: straight parts face down; elbows, tees and crosses with one face down; horizontal bores bridge their top, so keep them small or add a light tree support inside.",
   "Every clamp face is the ISO 2852 profile used across this site: 2.85 mm rim, flat face with the gasket groove (K 1.6 deep, R3 1.2 bottom, 23° walls, P2 0.8 edges) on C2, 20° back cone. Flange C3 / groove C2 / tube OD × wall, mm: ½–¾ in 25.0 / 20.4 (derived) / 12.7–19.05 × 1.65; 1–1½ in 50.5 / 43.5 / 25.4–38.1 × 1.65; 2 in 64.0 / 56.5 / 50.8 × 1.65; 2½ in 77.5 / 70.5 / 63.5 × 1.65; 3 in 91.0 / 83.5 / 76.2 × 1.65; 4 in 119.0 / 110.0 / 101.6 × 2.11; 6 in 166.9 (6.570 in) / 156.5 / 152.4 × 2.77; 8 in 217.7 (8.570 in) / 207.0 / 203.2 × 2.77; 10 in 268.5 / 261.0 / 254.0 × 3.40; 12 in 319.3 / 311.8 / 304.8 × 3.40."
  ],
  "table": {
   "columns": [
    "size_in",
    "face_to_crown_mm"
   ],
   "rows": [
    [
     "1½",
     18.5
    ],
    [
     "2",
     21.1
    ],
    [
     "3",
     26.2
    ],
    [
     "4",
     31.8
    ],
    [
     "6",
     38.9
    ],
    [
     "8",
     47.5
    ]
   ]
  }
 },
 "sheet_text": "Printable tri-clamp (45°): dome lids and ported caps — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/printable-tri-clamp-lids-caps/  (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/)\nBasis: Xem Studio design: the dome lids and ported caps of the standard pages with 45° rims\nCatalog version: 2026-10-20\n\nSizes: see table below\n- 3D-printable tri-clamp: this is Xem Studio's print-friendly version of the standard sanitary fitting, drawn so it prints on an ordinary FDM or resin printer with no supports. Download the STL to print it, or the STEP to edit it. The files are true size (no printing allowance): add your own clearance in the slicer or CAD if your printer needs it.\n- Lids print face down; the dome and ports grow up from the face.\n- Printable tri-clamp: the ISO 2852 face and gasket groove are exactly standard, only the back cone behind each rim is 45° instead of 20°, so no rim overhangs more than 45° from vertical in any print orientation. Join these with the 45° clamps (printable-tri-clamp-clamps) and standard Type B gaskets; a 45° clamp fits only 45° rims, so keep a run all 45°. A 45° cone turns clamp force into face force at 1 : 1 (a 20° cone at 2.7 : 1), so tighten the clamp bolts harder or use M6.\n- Print orientation: straight parts face down; elbows, tees and crosses with one face down; horizontal bores bridge their top, so keep them small or add a light tree support inside.\n- Every clamp face is the ISO 2852 profile used across this site: 2.85 mm rim, flat face with the gasket groove (K 1.6 deep, R3 1.2 bottom, 23° walls, P2 0.8 edges) on C2, 20° back cone. Flange C3 / groove C2 / tube OD × wall, mm: ½–¾ in 25.0 / 20.4 (derived) / 12.7–19.05 × 1.65; 1–1½ in 50.5 / 43.5 / 25.4–38.1 × 1.65; 2 in 64.0 / 56.5 / 50.8 × 1.65; 2½ in 77.5 / 70.5 / 63.5 × 1.65; 3 in 91.0 / 83.5 / 76.2 × 1.65; 4 in 119.0 / 110.0 / 101.6 × 2.11; 6 in 166.9 (6.570 in) / 156.5 / 152.4 × 2.77; 8 in 217.7 (8.570 in) / 207.0 / 203.2 × 2.77; 10 in 268.5 / 261.0 / 254.0 × 3.40; 12 in 319.3 / 311.8 / 304.8 × 3.40.\n\nsize_in  face_to_crown_mm\n1½  18.5\n2  21.1\n3  26.2\n4  31.8\n6  38.9\n8  47.5\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- ASME: B1.20.1 Pipe threads, general purpose (NPT): major diameter, L2, tap drill; B16.11 forged fittings (Class 3000 couplings); B36.10 Sch 40 bore — standard — ASME; dimensions are facts [verify license at link] — https://www.asme.org/codes-standards/find-codes-standards/b1-20-1-pipe-threads-general-purpose-inch\n- GW Kent: Tri-clamp fittings guide: tube OD, flange OD and ID per size to 12 in; solid cap thickness — web — publisher's guide; dimensions cited — https://www.gwkent.com/triclamp-guide\n- Rubber Fab: Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50) — PDF — maker chart; dimensions are facts [verify license at link] — https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf\n\nFree files (Xem Studio Design License, Xem Studio; STEP + STL, 16 parts): https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/index.json\nAPI: https://xemstudio.com/api/geometry?object=printable-tri-clamp-lids-caps\n",
 "sources": [
  {
   "publisher": "ASME",
   "title": "B1.20.1 Pipe threads, general purpose (NPT): major diameter, L2, tap drill; B16.11 forged fittings (Class 3000 couplings); B36.10 Sch 40 bore",
   "url": "https://www.asme.org/codes-standards/find-codes-standards/b1-20-1-pipe-threads-general-purpose-inch",
   "formats": [
    "standard"
   ],
   "license": "ASME; dimensions are facts",
   "license_verified": false,
   "hosted": false
  },
  {
   "publisher": "GW Kent",
   "title": "Tri-clamp fittings guide: tube OD, flange OD and ID per size to 12 in; solid cap thickness",
   "url": "https://www.gwkent.com/triclamp-guide",
   "formats": [
    "web"
   ],
   "license": "publisher's guide; dimensions cited",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Rubber Fab",
   "title": "Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50)",
   "url": "https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf",
   "formats": [
    "PDF"
   ],
   "license": "maker chart; dimensions are facts",
   "license_verified": false,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "tri-clamp-45-degree-printable",
  "printable-tri-clamp-clamps",
  "printable-tri-clamp-elbows",
  "printable-tri-clamp-tees-crosses",
  "printable-tri-clamp-reducers",
  "printable-tri-clamp-adapters"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "clamp face",
   "exact": "ISO 2852 face (flange C3 / groove C2): 1½ in 50.5 / 43.5; 2 in 64.0 / 56.5; 3 in 91.0 / 83.5; 4 in 119.0 / 110.0; 6 in 166.9 / 156.5; 8 in 217.7 / 207.0; rim 2.85; gasket groove 1.6 deep, R1.2 bottom, 23° walls; 45° back cone",
   "mates": "standard Type B gasket and the 45° clamps (printable-tri-clamp-clamps): a 45° clamp fits only 45° rims, so keep a run all 45°",
   "fit": "clamp",
   "files": "all"
  },
  {
   "feature": "grommet hole",
   "exact": "Ø12.7",
   "mates": "rubber grommet with a .500 in (12.7 mm) mounting hole (Heyco)",
   "fit": "press",
   "files": "cap-45cone-1.5in-grommet-hole-12.7"
  },
  {
   "feature": "face to crown (dome lids)",
   "exact": "1½ in 18.5, 2 in 21.1, 3 in 26.2, 4 in 31.8, 6 in 38.9, 8 in 47.5",
   "mates": "height above the clamp face (keep-out above the lid)",
   "fit": "designed",
   "files": "dome-lid-45cone-"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "Can I 3D print this?",
   "a": "Yes. It is the 3D-printable version: every overhang is 45° or steeper, so it prints without supports, and the sealing face is standard ISO 2852, so a normal gasket and clamp fit."
  },
  {
   "q": "Dome or flat?",
   "a": "The dome prints without support face down; a flat cap does too."
  }
 ],
 "files_license": {
  "name": "Xem Studio Design License",
  "holder": "Xem Studio",
  "url": "https://xemstudio.com/license/",
  "note": "Xem Studio's own design: free to use, print, modify and sell things made from it; not to be republished or redistributed as files."
 },
 "offers": [
  {
   "file": "dome-lid-45cone-1.5in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/dome-lid-45cone-1.5in.step",
   "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/dome-lid-45cone-1.5in.stl",
   "note": "1½ in dome lid, 18.5 face to crown"
  },
  {
   "file": "dome-lid-45cone-2in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/dome-lid-45cone-2in.step",
   "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/dome-lid-45cone-2in.stl",
   "note": "2 in dome lid, 21.1 face to crown"
  },
  {
   "file": "dome-lid-45cone-3in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/dome-lid-45cone-3in.step",
   "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/dome-lid-45cone-3in.stl",
   "note": "3 in dome lid, 26.2 face to crown"
  },
  {
   "file": "dome-lid-45cone-4in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/dome-lid-45cone-4in.step",
   "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/dome-lid-45cone-4in.stl",
   "note": "4 in dome lid, 31.8 face to crown"
  },
  {
   "file": "dome-lid-45cone-4in-1.5in-port",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/dome-lid-45cone-4in-1.5in-port.step",
   "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/dome-lid-45cone-4in-1.5in-port.stl",
   "note": "4 in dome lid with a 1½ in clamp port"
  },
  {
   "file": "dome-lid-45cone-6in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/dome-lid-45cone-6in.step",
   "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/dome-lid-45cone-6in.stl",
   "note": "6 in dome lid, 38.9 face to crown"
  },
  {
   "file": "dome-lid-45cone-6in-1.5in-port",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/dome-lid-45cone-6in-1.5in-port.step",
   "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/dome-lid-45cone-6in-1.5in-port.stl",
   "note": "6 in dome lid with a 1½ in clamp port"
  },
  {
   "file": "dome-lid-45cone-8in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/dome-lid-45cone-8in.step",
   "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/dome-lid-45cone-8in.stl",
   "note": "8 in dome lid, 47.5 face to crown"
  },
  {
   "file": "dome-lid-45cone-8in-1.5in-port",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/dome-lid-45cone-8in-1.5in-port.step",
   "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/dome-lid-45cone-8in-1.5in-port.stl",
   "note": "8 in dome lid with a 1½ in clamp port"
  },
  {
   "file": "cap-45cone-1.5in-1-4npt",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/cap-45cone-1.5in-1-4npt.step",
   "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/cap-45cone-1.5in-1-4npt.stl",
   "note": "1–1½ in cap with 1 4npt"
  },
  {
   "file": "cap-45cone-1.5in-1-2npt",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/cap-45cone-1.5in-1-2npt.step",
   "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/cap-45cone-1.5in-1-2npt.stl",
   "note": "1–1½ in cap with 1 2npt"
  },
  {
   "file": "cap-45cone-2in-1-2npt",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/cap-45cone-2in-1-2npt.step",
   "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/cap-45cone-2in-1-2npt.stl",
   "note": "2 in cap with 1 2npt"
  },
  {
   "file": "cap-45cone-1.5in-half-in-barb",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/cap-45cone-1.5in-half-in-barb.step",
   "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/cap-45cone-1.5in-half-in-barb.stl",
   "note": "1–1½ in cap with half in barb"
  },
  {
   "file": "cap-45cone-1.5in-grommet-hole-12.7",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/cap-45cone-1.5in-grommet-hole-12.7.step",
   "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/cap-45cone-1.5in-grommet-hole-12.7.stl",
   "note": "1–1½ in cap with grommet hole 12.7"
  },
  {
   "file": "cap-45cone-4in-1.5in-port",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/cap-45cone-4in-1.5in-port.step",
   "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/cap-45cone-4in-1.5in-port.stl",
   "note": "4 in cap with 1.5in port"
  },
  {
   "file": "cap-45cone-6in-1.5in-port",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/cap-45cone-6in-1.5in-port.step",
   "stl": "https://xemstudio.com/files/hardware/printable-tri-clamp-lids-caps/cap-45cone-6in-1.5in-port.stl",
   "note": "6 in cap with 1.5in port"
  }
 ],
 "markdown": "https://xemstudio.com/objects/printable-tri-clamp-lids-caps/index.md"
}