{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "round-top-plates-syringe-socket",
 "name": "Top plates Ø120 and Ø170 with a syringe socket",
 "kind": "hardware",
 "category": "Hardware",
 "group": "Magnets, plates & discs",
 "year": null,
 "question": "What round plate has a syringe socket?",
 "tags": [
  "ltd",
  "low temperature differential",
  "coffee cup",
  "top plate",
  "syringe",
  "stirling",
  "long earth society"
 ],
 "aliases": [
  "coffee cup stirling top plate",
  "ltd stirling plate dimensions",
  "ltd stirling syringe mount",
  "low temperature stirling top plate stl"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": true,
 "free_files": 2,
 "url": "https://xemstudio.com/objects/round-top-plates-syringe-socket/",
 "sheet_txt": "https://xemstudio.com/objects/round-top-plates-syringe-socket/sheet.txt",
 "sheet": {
  "basis": "Senft LTD gamma layout, sized in the assembled Ø100 engine on this site; syringe socket at the 10 mL barrel OD Ø15.9; rod bore at the 2 mm rod; M3 clearance Ø3.4 (ISO 273), M3 tap drill Ø2.5",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "The cold plate of the LTD engine and its power cylinder mount. Ø120 (for the 100 chamber) or Ø170 (for the 150 chamber), 3 thick, with 6 × Ø3.4 on a Ø112 / Ø162 circle (at 30°, 90°, …) matching the chamber ring.",
   "At x −5 a Ø20 boss, 13 tall with the plate, has a Ø2 bore straight through for the 2 mm displacer rod (fit: run); the bore is the rod guide.",
   "At x 40 (45 from the rod guide, so the two con-rods can sit at the two ends of the crankshaft) a Ø21.9 boss rises to 20 mm with a Ø15.9 socket from 8 to 20 for a 10 mL syringe barrel (fit: socket) and a Ø10 port under it into the chamber: the barrel's closed end sits on the socket floor and its Luer tip ends flush with the plate's underside.",
   "Four Ø9 × 4 pads at (7.5, ±27) and (27.5, ±27) carry the two crank stands, each with an M3 tapped hole (Ø2.5) 6 deep."
  ],
  "table": {
   "columns": [
    "file",
    "plate",
    "screw circle",
    "rod guide",
    "syringe socket",
    "height"
   ],
   "rows": [
    [
     "ltd-100-top-plate-syringe",
     "Ø120 × 3",
     112,
     "Ø2 × 13 at x −5",
     "Ø15.9 × 12 at x 40",
     20
    ],
    [
     "ltd-150-top-plate-syringe",
     "Ø170 × 3",
     162,
     "Ø2 × 13 at x −5",
     "Ø15.9 × 12 at x 40",
     20
    ]
   ]
  }
 },
 "sheet_text": "Top plates Ø120 and Ø170 with a syringe socket — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/round-top-plates-syringe-socket/  (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/)\nBasis: Senft LTD gamma layout, sized in the assembled Ø100 engine on this site; syringe socket at the 10 mL barrel OD Ø15.9; rod bore at the 2 mm rod; M3 clearance Ø3.4 (ISO 273), M3 tap drill Ø2.5\nCatalog version: 2026-10-20\n\nSizes: see table below\n- The cold plate of the LTD engine and its power cylinder mount. Ø120 (for the 100 chamber) or Ø170 (for the 150 chamber), 3 thick, with 6 × Ø3.4 on a Ø112 / Ø162 circle (at 30°, 90°, …) matching the chamber ring.\n- At x −5 a Ø20 boss, 13 tall with the plate, has a Ø2 bore straight through for the 2 mm displacer rod (fit: run); the bore is the rod guide.\n- At x 40 (45 from the rod guide, so the two con-rods can sit at the two ends of the crankshaft) a Ø21.9 boss rises to 20 mm with a Ø15.9 socket from 8 to 20 for a 10 mL syringe barrel (fit: socket) and a Ø10 port under it into the chamber: the barrel's closed end sits on the socket floor and its Luer tip ends flush with the plate's underside.\n- Four Ø9 × 4 pads at (7.5, ±27) and (27.5, ±27) carry the two crank stands, each with an M3 tapped hole (Ø2.5) 6 deep.\n\nfile  plate  screw circle  rod guide  syringe socket  height\nltd-100-top-plate-syringe  Ø120 × 3  112  Ø2 × 13 at x −5  Ø15.9 × 12 at x 40  20\nltd-150-top-plate-syringe  Ø170 × 3  162  Ø2 × 13 at x −5  Ø15.9 × 12 at x 40  20\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- Wikipedia: Stirling engine — web — CC BY-SA 4.0 (text) — https://en.wikipedia.org/wiki/Stirling_engine\n- James R. Senft: An Introduction to Low Temperature Differential Stirling Engines — book — Moriya Press [verify license at link] — https://www.stirlingengine.com/\n- Long Earth Society: Engine builds — web, video — LES site — https://longearthsociety.com/engineering/\n\nFree files (Xem Studio Design License, Xem Studio; STEP + STL, 2 parts): https://xemstudio.com/files/hardware/round-top-plates-syringe-socket/index.json\nAPI: https://xemstudio.com/api/geometry?object=round-top-plates-syringe-socket\n",
 "sources": [
  {
   "publisher": "Wikipedia",
   "title": "Stirling engine",
   "url": "https://en.wikipedia.org/wiki/Stirling_engine",
   "formats": [
    "web"
   ],
   "license": "CC BY-SA 4.0 (text)",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "James R. Senft",
   "title": "An Introduction to Low Temperature Differential Stirling Engines",
   "url": "https://www.stirlingengine.com/",
   "formats": [
    "book"
   ],
   "license": "Moriya Press",
   "license_verified": false,
   "hosted": false
  },
  {
   "publisher": "Long Earth Society",
   "title": "Engine builds",
   "url": "https://longearthsociety.com/engineering/",
   "formats": [
    "web",
    "video"
   ],
   "license": "LES site",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "chamber-rings-100-150",
  "round-bottom-plates-120-170",
  "flat-discs-on-rod-96-146",
  "tall-shaft-stand-623-bearing",
  "plastic-syringes"
 ],
 "fits": [
  {
   "role": "Parts that fit it",
   "items": [
    {
     "slug": "coat-hanger-and-paper-clip-wire",
     "why": "2 mm rod through the Ø2 bore in the top plate (run)"
    },
    {
     "slug": "tall-shaft-stand-623-bearing",
     "why": "2 × M3 down onto the top plate"
    },
    {
     "slug": "plain-rods-2-3mm",
     "why": "Ø2 rod in the top plate's Ø2 bore"
    }
   ]
  },
  {
   "role": "Goes in or on",
   "items": [
    {
     "slug": "chamber-rings-100-150",
     "why": "6 × M3 on the Ø112 / Ø162 circle"
    }
   ]
  },
  {
   "role": "Connects to",
   "items": [
    {
     "slug": "flat-discs-on-rod-96-146",
     "why": "the displacer's 2 mm rod runs in the Ø2 bore"
    },
    {
     "slug": "plastic-syringes",
     "why": "10 mL barrel in the Ø15.9 socket"
    },
    {
     "slug": "syringe-pistons",
     "why": "power piston in that barrel"
    }
   ]
  },
  {
   "role": "Also needed",
   "items": [
    {
     "slug": "brass-tube-ks",
     "why": "2 mm rod"
    }
   ]
  }
 ],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "syringe socket",
   "exact": "Ø15.9",
   "mates": "10 mL syringe barrel",
   "fit": "socket",
   "files": "ltd-100-top"
  },
  {
   "feature": "syringe socket",
   "exact": "Ø15.9",
   "mates": "10 mL syringe barrel",
   "fit": "socket",
   "files": "ltd-150-top"
  },
  {
   "feature": "plate screw holes",
   "exact": "Ø3.4",
   "mates": "M3 screw clearance (ISO 273)",
   "fit": "designed",
   "files": "ltd-100-top"
  },
  {
   "feature": "plate screw holes",
   "exact": "Ø3.4",
   "mates": "M3 screw clearance (ISO 273)",
   "fit": "designed",
   "files": "ltd-150-top"
  },
  {
   "feature": "stand pad holes",
   "exact": "Ø2.5 × 6",
   "mates": "M3 tap drill",
   "fit": "designed",
   "files": "ltd-100-top"
  },
  {
   "feature": "stand pad holes",
   "exact": "Ø2.5 × 6",
   "mates": "M3 tap drill",
   "fit": "designed",
   "files": "ltd-150-top"
  },
  {
   "feature": "syringe port under the socket",
   "exact": "Ø10",
   "mates": "syringe tip (no contact)",
   "fit": "designed",
   "files": "ltd-100-top"
  },
  {
   "feature": "syringe port under the socket",
   "exact": "Ø10",
   "mates": "syringe tip (no contact)",
   "fit": "designed",
   "files": "ltd-150-top"
  },
  {
   "feature": "rod-guide bore",
   "exact": "Ø2 × 13",
   "mates": "2 mm displacer rod",
   "fit": "run",
   "files": "ltd-100-top-plate-"
  },
  {
   "feature": "rod-guide bore",
   "exact": "Ø2 × 13",
   "mates": "2 mm displacer rod",
   "fit": "run",
   "files": "ltd-150-top-plate-"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "How does the displacer rod pass through an LTD top plate?",
   "a": "Through a Ø2 bore straight through the plate and its Ø20 centre boss, 13 long, drawn at the 2 mm rod (fit: run)."
  },
  {
   "q": "What syringe fits the LTD top plate?",
   "a": "A 10 mL barrel (Ø15.9 OD) in the 12 mm deep socket; its Luer tip sits in the Ø10 port below and ends flush with the plate's underside."
  }
 ],
 "files_license": {
  "name": "Xem Studio Design License",
  "holder": "Xem Studio",
  "url": "https://xemstudio.com/license/",
  "note": "Xem Studio's own design: free to use, print, modify and sell things made from it; not to be republished or redistributed as files."
 },
 "offers": [
  {
   "file": "ltd-100-top-plate-syringe",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/round-top-plates-syringe-socket/ltd-100-top-plate-syringe.step",
   "stl": "https://xemstudio.com/files/hardware/round-top-plates-syringe-socket/ltd-100-top-plate-syringe.stl",
   "note": "top plate Ø120 × 3: rod guide boss at x -5 (Ø2 bore, 13 long through plate and Ø20 boss), 10 mL syringe socket at x 40 (Ø15.9 from 8 to 20 above the underside, Ø10 port below so the Luer tip ends flush), 4 stand pads Ø9 × 4 with M3 tapped holes 6 deep, 6 × Ø3.4 on a Ø112 circle"
  },
  {
   "file": "ltd-150-top-plate-syringe",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/round-top-plates-syringe-socket/ltd-150-top-plate-syringe.step",
   "stl": "https://xemstudio.com/files/hardware/round-top-plates-syringe-socket/ltd-150-top-plate-syringe.stl",
   "note": "top plate Ø170 × 3: rod guide boss at x -5 (Ø2 bore, 13 long through plate and Ø20 boss), 10 mL syringe socket at x 40 (Ø15.9 from 8 to 20 above the underside, Ø10 port below so the Luer tip ends flush), 4 stand pads Ø9 × 4 with M3 tapped holes 6 deep, 6 × Ø3.4 on a Ø162 circle"
  }
 ],
 "markdown": "https://xemstudio.com/objects/round-top-plates-syringe-socket/index.md"
}