{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "sanitary-clamp-elbows",
 "name": "Sanitary clamp elbows, 90° and 45°, ½ to 4 in (tri-clamp style, BPE)",
 "kind": "standard",
 "category": "Tri-clamp & pipe",
 "group": "Clamp fittings",
 "year": null,
 "question": "What is the centre-to-face dimension of a 2 inch sanitary clamp elbow?",
 "tags": [
  "elbow",
  "90 degree",
  "45 degree",
  "2cmp",
  "2kmp",
  "sanitary",
  "tri-clamp",
  "clamp fitting",
  "stainless fitting",
  "brewing",
  "ferrule"
 ],
 "aliases": [
  "tri clamp elbow dimensions",
  "sanitary 90 elbow 2 inch",
  "2cmp elbow",
  "45 degree tri clamp elbow",
  "tri clamp elbow stl",
  "sanitary elbow step file"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": false,
 "free_files": 16,
 "url": "https://xemstudio.com/objects/sanitary-clamp-elbows/",
 "sheet_txt": "https://xemstudio.com/objects/sanitary-clamp-elbows/sheet.txt",
 "sheet": {
  "basis": "ASME BPE / 3-A clamp-fitting dimensions published identically by two manufacturers; ISO 2852 face profile; drawn by Xem Studio from those numbers",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "Clamp × clamp elbows: 90° (2CMP) and 45° (2KMP), both on the same centreline radius per size; a short straight sits between each face and the bend (0.5 in, 4 in: 0.625 in).",
   "Centre to face is measured from the intersection of the two leg centrelines to the face; that is the number to lay out a run with.",
   "ISO 2852 face: flat from the bore to the flange OD, gasket groove on C2 1.6 deep, bottom radius 1.2, walls 23°, edge radius 0.8; 2.85 mm rim, 20° back cone, on the BPE flange diameters ½–¾ in 25.0, 1–1½ in 50.5, 2 in 64.0, 2½ in 77.5, 3 in 91.0, 4 in 119.0 mm; tube OD 12.7 / 19.05 / 25.4 / 38.1 / 50.8 / 63.5 / 76.2 / 101.6 mm, wall 1.65 mm (4 in: 2.11). The gasket-groove diameter on ½ and ¾ in is derived (Ø20.4, centred between the ¾ in bore and the 25.0 flange so the groove fits); 4 in is Ø110.0 from the published gasket chart; the rest is from the standard. Type B gaskets: 1.7 web out to flange − 1, a bulge on each side on the groove diameter (5.5 overall), lip 1.1 inside the bore and 2.8 long; with the faces 1.7 apart each bulge is squeezed 0.3 into its groove (designed)."
  ],
  "table": {
   "columns": [
    "size_in",
    "tube_od_mm",
    "flange_mm",
    "c_to_f_90_mm",
    "c_to_f_45_mm",
    "radius_mm"
   ],
   "rows": [
    [
     "½",
     12.7,
     25,
     41.3,
     24.5,
     28.6
    ],
    [
     "¾",
     19.05,
     25,
     41.3,
     24.5,
     28.6
    ],
    [
     "1",
     25.4,
     50.5,
     50.8,
     28.6,
     38.1
    ],
    [
     "1½",
     38.1,
     50.5,
     69.8,
     36.5,
     57.1
    ],
    [
     "2",
     50.8,
     64,
     88.9,
     44.4,
     76.2
    ],
    [
     "2½",
     63.5,
     77.5,
     107.9,
     52.4,
     95.2
    ],
    [
     "3",
     76.2,
     91,
     127,
     60.3,
     114.3
    ],
    [
     "4",
     101.6,
     119,
     168.3,
     79.4,
     152.4
    ]
   ]
  }
 },
 "sheet_text": "Sanitary clamp elbows, 90° and 45°, ½ to 4 in (tri-clamp style, BPE) — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/sanitary-clamp-elbows/  (sheet CC BY 4.0)\nBasis: ASME BPE / 3-A clamp-fitting dimensions published identically by two manufacturers; ISO 2852 face profile; drawn by Xem Studio from those numbers\nCatalog version: 2026-10-20\n\nSizes: see table below\n- Clamp × clamp elbows: 90° (2CMP) and 45° (2KMP), both on the same centreline radius per size; a short straight sits between each face and the bend (0.5 in, 4 in: 0.625 in).\n- Centre to face is measured from the intersection of the two leg centrelines to the face; that is the number to lay out a run with.\n- ISO 2852 face: flat from the bore to the flange OD, gasket groove on C2 1.6 deep, bottom radius 1.2, walls 23°, edge radius 0.8; 2.85 mm rim, 20° back cone, on the BPE flange diameters ½–¾ in 25.0, 1–1½ in 50.5, 2 in 64.0, 2½ in 77.5, 3 in 91.0, 4 in 119.0 mm; tube OD 12.7 / 19.05 / 25.4 / 38.1 / 50.8 / 63.5 / 76.2 / 101.6 mm, wall 1.65 mm (4 in: 2.11). The gasket-groove diameter on ½ and ¾ in is derived (Ø20.4, centred between the ¾ in bore and the 25.0 flange so the groove fits); 4 in is Ø110.0 from the published gasket chart; the rest is from the standard. Type B gaskets: 1.7 web out to flange − 1, a bulge on each side on the groove diameter (5.5 overall), lip 1.1 inside the bore and 2.8 long; with the faces 1.7 apart each bulge is squeezed 0.3 into its groove (designed).\n\nsize_in  tube_od_mm  flange_mm  c_to_f_90_mm  c_to_f_45_mm  radius_mm\n½  12.7  25.0  41.3  24.5  28.6\n¾  19.05  25.0  41.3  24.5  28.6\n1  25.4  50.5  50.8  28.6  38.1\n1½  38.1  50.5  69.8  36.5  57.1\n2  50.8  64.0  88.9  44.4  76.2\n2½  63.5  77.5  107.9  52.4  95.2\n3  76.2  91.0  127.0  60.3  114.3\n4  101.6  119.0  168.3  79.4  152.4\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- ASME: BPE Bioprocessing Equipment (clamp fitting dimensions, tube OD and wall) — standard — ASME; dimensions are facts [verify license at link] — https://www.asme.org/codes-standards/find-codes-standards/bpe-bioprocessing-equipment\n- ISO (via iTeh sample): ISO 2852 clamp liners: face profile and flange / groove diameters — PDF — standard excerpt; dimensions are facts — https://cdn.standards.iteh.ai/samples/7850/eb49c396488d408c8ced3e2961d76cf3/ISO-2852-1974.pdf\n- Dixon Sanitary: Clamp elbows, ferrules: dimension sheet — PDF — publisher's catalogue; dimensions cited, nothing copied — https://dixonvalve.com/en/media/1397776\n- Steel & O'Brien: Sanitary products catalog 2024 (clamp fittings dimension tables) — PDF — publisher's catalogue; dimensions cited, nothing copied — https://www.steelobrien.com/wp-content/uploads/2024/03/Sanitary-2024-FINAL.pdf\n- Rubber Fab: Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50) — PDF — maker chart; dimensions are facts [verify license at link] — https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf\n\nFree files (CC BY 4.0, Xem Studio; STEP + STL, 16 parts): https://xemstudio.com/files/hardware/sanitary-clamp-elbows/index.json\nAPI: https://xemstudio.com/api/geometry?object=sanitary-clamp-elbows\n",
 "sources": [
  {
   "publisher": "ASME",
   "title": "BPE Bioprocessing Equipment (clamp fitting dimensions, tube OD and wall)",
   "url": "https://www.asme.org/codes-standards/find-codes-standards/bpe-bioprocessing-equipment",
   "formats": [
    "standard"
   ],
   "license": "ASME; dimensions are facts",
   "license_verified": false,
   "hosted": false
  },
  {
   "publisher": "ISO (via iTeh sample)",
   "title": "ISO 2852 clamp liners: face profile and flange / groove diameters",
   "url": "https://cdn.standards.iteh.ai/samples/7850/eb49c396488d408c8ced3e2961d76cf3/ISO-2852-1974.pdf",
   "formats": [
    "PDF"
   ],
   "license": "standard excerpt; dimensions are facts",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Dixon Sanitary",
   "title": "Clamp elbows, ferrules: dimension sheet",
   "url": "https://dixonvalve.com/en/media/1397776",
   "formats": [
    "PDF"
   ],
   "license": "publisher's catalogue; dimensions cited, nothing copied",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Steel & O'Brien",
   "title": "Sanitary products catalog 2024 (clamp fittings dimension tables)",
   "url": "https://www.steelobrien.com/wp-content/uploads/2024/03/Sanitary-2024-FINAL.pdf",
   "formats": [
    "PDF"
   ],
   "license": "publisher's catalogue; dimensions cited, nothing copied",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Rubber Fab",
   "title": "Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50)",
   "url": "https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf",
   "formats": [
    "PDF"
   ],
   "license": "maker chart; dimensions are facts",
   "license_verified": false,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "sanitary-clamp-tees",
  "sanitary-clamp-reducers",
  "sanitary-clamp-end-caps",
  "tri-clamp-clamps",
  "tri-clamp-spool",
  "tri-clamp-ferrule"
 ],
 "fits": [
  {
   "role": "Connects to",
   "items": [
    {
     "slug": "tri-clamp-clamps",
     "why": "a clamp and gasket at each face"
    },
    {
     "slug": "sanitary-clamp-tees",
     "why": "same faces, same sizes"
    },
    {
     "slug": "sanitary-clamp-end-caps",
     "why": "spools between fittings, caps to close"
    }
   ]
  },
  {
   "role": "Alternatives",
   "items": [
    {
     "slug": "sanitary-clamp-reducers",
     "why": "change size instead of direction"
    }
   ]
  }
 ],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "clamp faces",
   "exact": "ISO 2852 / BPE flange",
   "mates": "clamp + Type B gasket to any fitting of the same size",
   "fit": "clamp",
   "files": "all"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "What is the centre-to-face of a 2 in sanitary 90° clamp elbow?",
   "a": "3.50 in (88.9 mm), on a 3.0 in (76.2 mm) centreline radius; the 45° is 1.75 in (44.5 mm)."
  },
  {
   "q": "Are ½ and ¾ in clamp elbows the same size?",
   "a": "Yes: both use the 25.0 mm mini flange and a 1.625 in centre to face (90°)."
  },
  {
   "q": "Do these mate with real sanitary fittings?",
   "a": "Yes: the faces are the ISO 2852 / BPE profile, so a standard clamp and gasket join them to any clamp fitting of the same size."
  }
 ],
 "files_license": null,
 "offers": [
  {
   "file": "elbow-90-0.5in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-elbows/elbow-90-0.5in.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-elbows/elbow-90-0.5in.stl",
   "note": "½ in 90° clamp × clamp elbow (2CMP): 1.625 in centre to face, R 1.125 in"
  },
  {
   "file": "elbow-45-0.5in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-elbows/elbow-45-0.5in.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-elbows/elbow-45-0.5in.stl",
   "note": "½ in 45° clamp × clamp elbow (2KMP): 0.966 in centre to face, R 1.125 in"
  },
  {
   "file": "elbow-90-0.75in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-elbows/elbow-90-0.75in.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-elbows/elbow-90-0.75in.stl",
   "note": "¾ in 90° clamp × clamp elbow (2CMP): 1.625 in centre to face, R 1.125 in"
  },
  {
   "file": "elbow-45-0.75in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-elbows/elbow-45-0.75in.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-elbows/elbow-45-0.75in.stl",
   "note": "¾ in 45° clamp × clamp elbow (2KMP): 0.966 in centre to face, R 1.125 in"
  },
  {
   "file": "elbow-90-1in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-elbows/elbow-90-1in.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-elbows/elbow-90-1in.stl",
   "note": "1 in 90° clamp × clamp elbow (2CMP): 2.0 in centre to face, R 1.5 in"
  },
  {
   "file": "elbow-45-1in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-elbows/elbow-45-1in.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-elbows/elbow-45-1in.stl",
   "note": "1 in 45° clamp × clamp elbow (2KMP): 1.125 in centre to face, R 1.5 in"
  },
  {
   "file": "elbow-90-1.5in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-elbows/elbow-90-1.5in.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-elbows/elbow-90-1.5in.stl",
   "note": "1½ in 90° clamp × clamp elbow (2CMP): 2.75 in centre to face, R 2.25 in"
  },
  {
   "file": "elbow-45-1.5in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-elbows/elbow-45-1.5in.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-elbows/elbow-45-1.5in.stl",
   "note": "1½ in 45° clamp × clamp elbow (2KMP): 1.437 in centre to face, R 2.25 in"
  },
  {
   "file": "elbow-90-2in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-elbows/elbow-90-2in.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-elbows/elbow-90-2in.stl",
   "note": "2 in 90° clamp × clamp elbow (2CMP): 3.5 in centre to face, R 3.0 in"
  },
  {
   "file": "elbow-45-2in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-elbows/elbow-45-2in.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-elbows/elbow-45-2in.stl",
   "note": "2 in 45° clamp × clamp elbow (2KMP): 1.75 in centre to face, R 3.0 in"
  },
  {
   "file": "elbow-90-2.5in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-elbows/elbow-90-2.5in.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-elbows/elbow-90-2.5in.stl",
   "note": "2½ in 90° clamp × clamp elbow (2CMP): 4.25 in centre to face, R 3.75 in"
  },
  {
   "file": "elbow-45-2.5in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-elbows/elbow-45-2.5in.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-elbows/elbow-45-2.5in.stl",
   "note": "2½ in 45° clamp × clamp elbow (2KMP): 2.063 in centre to face, R 3.75 in"
  },
  {
   "file": "elbow-90-3in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-elbows/elbow-90-3in.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-elbows/elbow-90-3in.stl",
   "note": "3 in 90° clamp × clamp elbow (2CMP): 5.0 in centre to face, R 4.5 in"
  },
  {
   "file": "elbow-45-3in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-elbows/elbow-45-3in.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-elbows/elbow-45-3in.stl",
   "note": "3 in 45° clamp × clamp elbow (2KMP): 2.375 in centre to face, R 4.5 in"
  },
  {
   "file": "elbow-90-4in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-elbows/elbow-90-4in.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-elbows/elbow-90-4in.stl",
   "note": "4 in 90° clamp × clamp elbow (2CMP): 6.625 in centre to face, R 6.0 in"
  },
  {
   "file": "elbow-45-4in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-elbows/elbow-45-4in.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-elbows/elbow-45-4in.stl",
   "note": "4 in 45° clamp × clamp elbow (2KMP): 3.125 in centre to face, R 6.0 in"
  }
 ],
 "markdown": "https://xemstudio.com/objects/sanitary-clamp-elbows/index.md"
}