{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "sanitary-clamp-ferrules",
 "name": "Sanitary clamp weld ferrules, short and medium: ½ to 4 in",
 "kind": "standard",
 "category": "Tri-clamp & pipe",
 "group": "Clamp fittings",
 "year": null,
 "question": "What are the flange and tube dimensions of each tri-clamp ferrule size?",
 "tags": [
  "ferrule",
  "14wmp",
  "tri-clamp",
  "sanitary",
  "weld ferrule"
 ],
 "aliases": [
  "tri clamp size chart",
  "tri clamp flange diameter",
  "sanitary ferrule dimensions",
  "14wmp ferrule",
  "mini tri clamp 25mm"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": false,
 "free_files": 16,
 "url": "https://xemstudio.com/objects/sanitary-clamp-ferrules/",
 "sheet_txt": "https://xemstudio.com/objects/sanitary-clamp-ferrules/sheet.txt",
 "sheet": {
  "basis": "ASME BPE / 3-A clamp-fitting dimensions published identically by Dixon and Steel & O'Brien; ISO 2852 face profile",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "A weld ferrule: one ISO 2852 face on a length of BPE tube. Short (14WMP) is 12.7 mm (0.5 in) long, medium (L14AM7) 28.6 mm (1.125 in).",
   "Tube OD 12.7 / 19.05 / 25.4 / 38.1 / 50.8 / 63.5 / 76.2 / 101.6 mm, wall 1.65 mm (4 in: 2.11).",
   "Flange: ½–¾ in share Ø25.0, 1–1½ in share Ø50.5, 2 in Ø64.0, 2½ in Ø77.5, 3 in Ø91.0, 4 in Ø119.0.",
   "Faces are the ISO 2852 profile: flat from the bore out to the flange OD with one gasket groove centred on the groove diameter (1.6 deep, bottom radius 1.2, walls 23°, edge radius 0.8, 4.01 wide at the face), 2.85 mm rim, 20° back cone, on the BPE flange diameters; the groove diameter is ISO 2852's C2 and the bead diameter of published gasket charts (4 in Ø110.0 from the chart); on ½ and ¾ in it is derived (Ø20.4, centred between the ¾ in bore and the flange OD)."
  ],
  "table": {
   "columns": [
    "size_in",
    "tube_od_mm",
    "wall_mm",
    "bore_mm",
    "flange_od_mm",
    "groove_mm",
    "lengths_mm"
   ],
   "rows": [
    [
     "½",
     12.7,
     1.65,
     9.4,
     25,
     18,
     "12.7 / 28.6"
    ],
    [
     "¾",
     19.05,
     1.65,
     15.75,
     25,
     18,
     "12.7 / 28.6"
    ],
    [
     "1",
     25.4,
     1.65,
     22.1,
     50.5,
     43.5,
     "12.7 / 28.6"
    ],
    [
     "1½",
     38.1,
     1.65,
     34.8,
     50.5,
     43.5,
     "12.7 / 28.6"
    ],
    [
     "2",
     50.8,
     1.65,
     47.5,
     64,
     56.5,
     "12.7 / 28.6"
    ],
    [
     "2½",
     63.5,
     1.65,
     60.2,
     77.5,
     70.5,
     "12.7 / 28.6"
    ],
    [
     "3",
     76.2,
     1.65,
     72.9,
     91,
     83.5,
     "12.7 / 28.6"
    ],
    [
     "4",
     101.6,
     2.11,
     97.38,
     119,
     111.5,
     "12.7 / 28.6"
    ]
   ]
  }
 },
 "sheet_text": "Sanitary clamp weld ferrules, short and medium: ½ to 4 in — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/sanitary-clamp-ferrules/  (sheet CC BY 4.0)\nBasis: ASME BPE / 3-A clamp-fitting dimensions published identically by Dixon and Steel & O'Brien; ISO 2852 face profile\nCatalog version: 2026-10-20\n\nSizes: see table below\n- A weld ferrule: one ISO 2852 face on a length of BPE tube. Short (14WMP) is 12.7 mm (0.5 in) long, medium (L14AM7) 28.6 mm (1.125 in).\n- Tube OD 12.7 / 19.05 / 25.4 / 38.1 / 50.8 / 63.5 / 76.2 / 101.6 mm, wall 1.65 mm (4 in: 2.11).\n- Flange: ½–¾ in share Ø25.0, 1–1½ in share Ø50.5, 2 in Ø64.0, 2½ in Ø77.5, 3 in Ø91.0, 4 in Ø119.0.\n- Faces are the ISO 2852 profile: flat from the bore out to the flange OD with one gasket groove centred on the groove diameter (1.6 deep, bottom radius 1.2, walls 23°, edge radius 0.8, 4.01 wide at the face), 2.85 mm rim, 20° back cone, on the BPE flange diameters; the groove diameter is ISO 2852's C2 and the bead diameter of published gasket charts (4 in Ø110.0 from the chart); on ½ and ¾ in it is derived (Ø20.4, centred between the ¾ in bore and the flange OD).\n\nsize_in  tube_od_mm  wall_mm  bore_mm  flange_od_mm  groove_mm  lengths_mm\n½  12.7  1.65  9.4  25.0  18.0  12.7 / 28.6\n¾  19.05  1.65  15.75  25.0  18.0  12.7 / 28.6\n1  25.4  1.65  22.1  50.5  43.5  12.7 / 28.6\n1½  38.1  1.65  34.8  50.5  43.5  12.7 / 28.6\n2  50.8  1.65  47.5  64.0  56.5  12.7 / 28.6\n2½  63.5  1.65  60.2  77.5  70.5  12.7 / 28.6\n3  76.2  1.65  72.9  91.0  83.5  12.7 / 28.6\n4  101.6  2.11  97.38  119.0  111.5  12.7 / 28.6\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- ASME: BPE Bioprocessing Equipment (clamp fitting dimensions, tube OD and wall) — standard — ASME; dimensions are facts [verify license at link] — https://www.asme.org/codes-standards/find-codes-standards/bpe-bioprocessing-equipment\n- ISO (via iTeh sample): ISO 2852 clamp liners: face profile and flange / groove diameters — PDF — standard excerpt; dimensions are facts — https://cdn.standards.iteh.ai/samples/7850/eb49c396488d408c8ced3e2961d76cf3/ISO-2852-1974.pdf\n- Dixon Sanitary: Clamp elbows, ferrules: dimension sheet — PDF — publisher's catalogue; dimensions cited, nothing copied — https://dixonvalve.com/en/media/1397776\n- Steel & O'Brien: Sanitary products catalog 2024 (clamp fittings dimension tables) — PDF — publisher's catalogue; dimensions cited, nothing copied — https://www.steelobrien.com/wp-content/uploads/2024/03/Sanitary-2024-FINAL.pdf\n- Rubber Fab: Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50) — PDF — maker chart; dimensions are facts [verify license at link] — https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf\n\nFree files (CC BY 4.0, Xem Studio; STEP + STL, 16 parts): https://xemstudio.com/files/hardware/sanitary-clamp-ferrules/index.json\nAPI: https://xemstudio.com/api/geometry?object=sanitary-clamp-ferrules\n",
 "sources": [
  {
   "publisher": "ASME",
   "title": "BPE Bioprocessing Equipment (clamp fitting dimensions, tube OD and wall)",
   "url": "https://www.asme.org/codes-standards/find-codes-standards/bpe-bioprocessing-equipment",
   "formats": [
    "standard"
   ],
   "license": "ASME; dimensions are facts",
   "license_verified": false,
   "hosted": false
  },
  {
   "publisher": "ISO (via iTeh sample)",
   "title": "ISO 2852 clamp liners: face profile and flange / groove diameters",
   "url": "https://cdn.standards.iteh.ai/samples/7850/eb49c396488d408c8ced3e2961d76cf3/ISO-2852-1974.pdf",
   "formats": [
    "PDF"
   ],
   "license": "standard excerpt; dimensions are facts",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Dixon Sanitary",
   "title": "Clamp elbows, ferrules: dimension sheet",
   "url": "https://dixonvalve.com/en/media/1397776",
   "formats": [
    "PDF"
   ],
   "license": "publisher's catalogue; dimensions cited, nothing copied",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Steel & O'Brien",
   "title": "Sanitary products catalog 2024 (clamp fittings dimension tables)",
   "url": "https://www.steelobrien.com/wp-content/uploads/2024/03/Sanitary-2024-FINAL.pdf",
   "formats": [
    "PDF"
   ],
   "license": "publisher's catalogue; dimensions cited, nothing copied",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Rubber Fab",
   "title": "Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50)",
   "url": "https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf",
   "formats": [
    "PDF"
   ],
   "license": "maker chart; dimensions are facts",
   "license_verified": false,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "sanitary-clamp-spools",
  "sanitary-clamp-end-caps",
  "sanitary-clamp-gaskets",
  "tri-clamp-ferrule",
  "tri-clamp-clamps"
 ],
 "fits": [
  {
   "role": "Connects to",
   "items": [
    {
     "slug": "sanitary-clamp-end-caps",
     "why": "cap on the face"
    },
    {
     "slug": "sanitary-clamp-tees",
     "why": "any fitting with the same flange"
    }
   ]
  },
  {
   "role": "Alternatives",
   "items": [
    {
     "slug": "tri-clamp-ferrule",
     "why": "the original 1–3 in ferrules"
    }
   ]
  },
  {
   "role": "Also needed",
   "items": [
    {
     "slug": "sanitary-clamp-gaskets",
     "why": "Type B gasket per joint"
    },
    {
     "slug": "tri-clamp-clamps",
     "why": "clamp per joint"
    }
   ]
  }
 ],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "clamp faces",
   "exact": "ISO 2852 / BPE flange",
   "mates": "clamp + Type B gasket",
   "fit": "clamp",
   "files": "all"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "What is the flange diameter of a 2 inch tri-clamp?",
   "a": "64.0 mm; 1 and 1½ in share 50.5, ½ and ¾ in share 25.0, 2½ in 77.5, 3 in 91.0, 4 in 119.0."
  },
  {
   "q": "Is a 1½ inch tri-clamp the same as a 1 inch?",
   "a": "Same Ø50.5 flange and clamp, different tube: 38.1 vs 25.4 mm OD."
  },
  {
   "q": "What is the wall of sanitary tube?",
   "a": "1.65 mm (0.065 in) from ½ to 3 in; 2.11 mm (0.083 in) at 4 in."
  }
 ],
 "files_license": null,
 "offers": [
  {
   "file": "ferrule-0.5in-12.7mm",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-caps-ferrules-spools/ferrule-0.5in-12.7mm.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-caps-ferrules-spools/ferrule-0.5in-12.7mm.stl",
   "note": "½ in short weld ferrule (14WMP), 0.5 in long"
  },
  {
   "file": "ferrule-0.5in-28.6mm",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-caps-ferrules-spools/ferrule-0.5in-28.6mm.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-caps-ferrules-spools/ferrule-0.5in-28.6mm.stl",
   "note": "½ in medium weld ferrule (L14AM7), 1.125 in long"
  },
  {
   "file": "ferrule-0.75in-12.7mm",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-caps-ferrules-spools/ferrule-0.75in-12.7mm.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-caps-ferrules-spools/ferrule-0.75in-12.7mm.stl",
   "note": "¾ in short weld ferrule (14WMP), 0.5 in long"
  },
  {
   "file": "ferrule-0.75in-28.6mm",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-caps-ferrules-spools/ferrule-0.75in-28.6mm.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-caps-ferrules-spools/ferrule-0.75in-28.6mm.stl",
   "note": "¾ in medium weld ferrule (L14AM7), 1.125 in long"
  },
  {
   "file": "ferrule-1in-12.7mm",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-caps-ferrules-spools/ferrule-1in-12.7mm.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-caps-ferrules-spools/ferrule-1in-12.7mm.stl",
   "note": "1 in short weld ferrule (14WMP), 0.5 in long"
  },
  {
   "file": "ferrule-1in-28.6mm",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-caps-ferrules-spools/ferrule-1in-28.6mm.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-caps-ferrules-spools/ferrule-1in-28.6mm.stl",
   "note": "1 in medium weld ferrule (L14AM7), 1.125 in long"
  },
  {
   "file": "ferrule-1.5in-12.7mm",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-caps-ferrules-spools/ferrule-1.5in-12.7mm.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-caps-ferrules-spools/ferrule-1.5in-12.7mm.stl",
   "note": "1½ in short weld ferrule (14WMP), 0.5 in long"
  },
  {
   "file": "ferrule-1.5in-28.6mm",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-caps-ferrules-spools/ferrule-1.5in-28.6mm.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-caps-ferrules-spools/ferrule-1.5in-28.6mm.stl",
   "note": "1½ in medium weld ferrule (L14AM7), 1.125 in long"
  },
  {
   "file": "ferrule-2in-12.7mm",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-caps-ferrules-spools/ferrule-2in-12.7mm.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-caps-ferrules-spools/ferrule-2in-12.7mm.stl",
   "note": "2 in short weld ferrule (14WMP), 0.5 in long"
  },
  {
   "file": "ferrule-2in-28.6mm",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-caps-ferrules-spools/ferrule-2in-28.6mm.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-caps-ferrules-spools/ferrule-2in-28.6mm.stl",
   "note": "2 in medium weld ferrule (L14AM7), 1.125 in long"
  },
  {
   "file": "ferrule-2.5in-12.7mm",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-caps-ferrules-spools/ferrule-2.5in-12.7mm.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-caps-ferrules-spools/ferrule-2.5in-12.7mm.stl",
   "note": "2½ in short weld ferrule (14WMP), 0.5 in long"
  },
  {
   "file": "ferrule-2.5in-28.6mm",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-caps-ferrules-spools/ferrule-2.5in-28.6mm.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-caps-ferrules-spools/ferrule-2.5in-28.6mm.stl",
   "note": "2½ in medium weld ferrule (L14AM7), 1.125 in long"
  },
  {
   "file": "ferrule-3in-12.7mm",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-caps-ferrules-spools/ferrule-3in-12.7mm.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-caps-ferrules-spools/ferrule-3in-12.7mm.stl",
   "note": "3 in short weld ferrule (14WMP), 0.5 in long"
  },
  {
   "file": "ferrule-3in-28.6mm",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-caps-ferrules-spools/ferrule-3in-28.6mm.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-caps-ferrules-spools/ferrule-3in-28.6mm.stl",
   "note": "3 in medium weld ferrule (L14AM7), 1.125 in long"
  },
  {
   "file": "ferrule-4in-12.7mm",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-caps-ferrules-spools/ferrule-4in-12.7mm.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-caps-ferrules-spools/ferrule-4in-12.7mm.stl",
   "note": "4 in short weld ferrule (14WMP), 0.5 in long"
  },
  {
   "file": "ferrule-4in-28.6mm",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-caps-ferrules-spools/ferrule-4in-28.6mm.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-caps-ferrules-spools/ferrule-4in-28.6mm.stl",
   "note": "4 in medium weld ferrule (L14AM7), 1.125 in long"
  }
 ],
 "markdown": "https://xemstudio.com/objects/sanitary-clamp-ferrules/index.md"
}