{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "sanitary-clamp-tees",
 "name": "Sanitary clamp tees and short-outlet tees (7MP, 7MPS): ½ to 4 in",
 "kind": "standard",
 "category": "Tri-clamp & pipe",
 "group": "Clamp fittings",
 "year": null,
 "question": "What are the dimensions of a 2 inch tri-clamp tee?",
 "tags": [
  "tee",
  "7mp",
  "7mps",
  "short outlet tee",
  "tri-clamp",
  "sanitary"
 ],
 "aliases": [
  "tri clamp tee dimensions",
  "sanitary tee 2 inch",
  "7mp tee",
  "short outlet tee",
  "tri clamp tee stl"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": false,
 "free_files": 14,
 "url": "https://xemstudio.com/objects/sanitary-clamp-tees/",
 "sheet_txt": "https://xemstudio.com/objects/sanitary-clamp-tees/sheet.txt",
 "sheet": {
  "basis": "ASME BPE / 3-A clamp-fitting dimensions published identically by Dixon and Steel & O'Brien; ISO 2852 face profile",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "Equal tee (7MP): a run with a face at each end and one branch of the same size at 90°. Run face to face B, branch centre to face A.",
   "Short-outlet tee (7MPS): the same run with a branch only as long as its flange needs, for a gauge, probe or valve right at the line; 1 to 4 in.",
   "Faces are the ISO 2852 profile: flat from the bore out to the flange OD with one gasket groove centred on the groove diameter (1.6 deep, bottom radius 1.2, walls 23°, edge radius 0.8, 4.01 wide at the face), 2.85 mm rim, 20° back cone, on the BPE flange diameters; the groove diameter is ISO 2852's C2 and the bead diameter of published gasket charts (4 in Ø110.0 from the chart); on ½ and ¾ in it is derived (Ø20.4, centred between the ¾ in bore and the flange OD)."
  ],
  "table": {
   "columns": [
    "size_in",
    "run_face_to_face_mm",
    "branch_centre_to_face_mm",
    "short_branch_centre_to_face_mm"
   ],
   "rows": [
    [
     "½",
     63.5,
     31.8,
     "—"
    ],
    [
     "¾",
     120.6,
     60.3,
     "—"
    ],
    [
     "1",
     120.6,
     60.3,
     28.6
    ],
    [
     "1½",
     139.7,
     69.8,
     34.9
    ],
    [
     "2",
     177.8,
     88.9,
     41.3
    ],
    [
     "2½",
     177.8,
     88.9,
     47.6
    ],
    [
     "3",
     190.5,
     95.2,
     54
    ],
    [
     "4",
     228.6,
     114.3,
     69.8
    ]
   ]
  }
 },
 "sheet_text": "Sanitary clamp tees and short-outlet tees (7MP, 7MPS): ½ to 4 in — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/sanitary-clamp-tees/  (sheet CC BY 4.0)\nBasis: ASME BPE / 3-A clamp-fitting dimensions published identically by Dixon and Steel & O'Brien; ISO 2852 face profile\nCatalog version: 2026-10-20\n\nSizes: see table below\n- Equal tee (7MP): a run with a face at each end and one branch of the same size at 90°. Run face to face B, branch centre to face A.\n- Short-outlet tee (7MPS): the same run with a branch only as long as its flange needs, for a gauge, probe or valve right at the line; 1 to 4 in.\n- Faces are the ISO 2852 profile: flat from the bore out to the flange OD with one gasket groove centred on the groove diameter (1.6 deep, bottom radius 1.2, walls 23°, edge radius 0.8, 4.01 wide at the face), 2.85 mm rim, 20° back cone, on the BPE flange diameters; the groove diameter is ISO 2852's C2 and the bead diameter of published gasket charts (4 in Ø110.0 from the chart); on ½ and ¾ in it is derived (Ø20.4, centred between the ¾ in bore and the flange OD).\n\nsize_in  run_face_to_face_mm  branch_centre_to_face_mm  short_branch_centre_to_face_mm\n½  63.5  31.8  —\n¾  120.6  60.3  —\n1  120.6  60.3  28.6\n1½  139.7  69.8  34.9\n2  177.8  88.9  41.3\n2½  177.8  88.9  47.6\n3  190.5  95.2  54.0\n4  228.6  114.3  69.8\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- ASME: BPE Bioprocessing Equipment (clamp fitting dimensions, tube OD and wall) — standard — ASME; dimensions are facts [verify license at link] — https://www.asme.org/codes-standards/find-codes-standards/bpe-bioprocessing-equipment\n- ISO (via iTeh sample): ISO 2852 clamp liners: face profile and flange / groove diameters — PDF — standard excerpt; dimensions are facts — https://cdn.standards.iteh.ai/samples/7850/eb49c396488d408c8ced3e2961d76cf3/ISO-2852-1974.pdf\n- Dixon Sanitary: Clamp elbows, ferrules: dimension sheet — PDF — publisher's catalogue; dimensions cited, nothing copied — https://dixonvalve.com/en/media/1397776\n- Steel & O'Brien: Sanitary products catalog 2024 (clamp fittings dimension tables) — PDF — publisher's catalogue; dimensions cited, nothing copied — https://www.steelobrien.com/wp-content/uploads/2024/03/Sanitary-2024-FINAL.pdf\n- Rubber Fab: Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50) — PDF — maker chart; dimensions are facts [verify license at link] — https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf\n\nFree files (CC BY 4.0, Xem Studio; STEP + STL, 14 parts): https://xemstudio.com/files/hardware/sanitary-clamp-tees/index.json\nAPI: https://xemstudio.com/api/geometry?object=sanitary-clamp-tees\n",
 "sources": [
  {
   "publisher": "ASME",
   "title": "BPE Bioprocessing Equipment (clamp fitting dimensions, tube OD and wall)",
   "url": "https://www.asme.org/codes-standards/find-codes-standards/bpe-bioprocessing-equipment",
   "formats": [
    "standard"
   ],
   "license": "ASME; dimensions are facts",
   "license_verified": false,
   "hosted": false
  },
  {
   "publisher": "ISO (via iTeh sample)",
   "title": "ISO 2852 clamp liners: face profile and flange / groove diameters",
   "url": "https://cdn.standards.iteh.ai/samples/7850/eb49c396488d408c8ced3e2961d76cf3/ISO-2852-1974.pdf",
   "formats": [
    "PDF"
   ],
   "license": "standard excerpt; dimensions are facts",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Dixon Sanitary",
   "title": "Clamp elbows, ferrules: dimension sheet",
   "url": "https://dixonvalve.com/en/media/1397776",
   "formats": [
    "PDF"
   ],
   "license": "publisher's catalogue; dimensions cited, nothing copied",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Steel & O'Brien",
   "title": "Sanitary products catalog 2024 (clamp fittings dimension tables)",
   "url": "https://www.steelobrien.com/wp-content/uploads/2024/03/Sanitary-2024-FINAL.pdf",
   "formats": [
    "PDF"
   ],
   "license": "publisher's catalogue; dimensions cited, nothing copied",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Rubber Fab",
   "title": "Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50)",
   "url": "https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf",
   "formats": [
    "PDF"
   ],
   "license": "maker chart; dimensions are facts",
   "license_verified": false,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "sanitary-clamp-crosses",
  "sanitary-clamp-elbows",
  "sanitary-clamp-end-caps",
  "sanitary-clamp-manifolds",
  "tri-clamp-clamps"
 ],
 "fits": [
  {
   "role": "Connects to",
   "items": [
    {
     "slug": "sanitary-clamp-spools",
     "why": "spools on each face"
    },
    {
     "slug": "sanitary-clamp-end-caps",
     "why": "cap an unused branch"
    }
   ]
  },
  {
   "role": "Alternatives",
   "items": [
    {
     "slug": "sanitary-clamp-crosses",
     "why": "two opposite branches"
    },
    {
     "slug": "sanitary-clamp-manifolds",
     "why": "several outlets on one header"
    }
   ]
  },
  {
   "role": "Also needed",
   "items": [
    {
     "slug": "tri-clamp-clamps",
     "why": "clamp and gasket per face"
    }
   ]
  }
 ],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "clamp faces",
   "exact": "ISO 2852 / BPE flange",
   "mates": "clamp + Type B gasket to any fitting of the same size",
   "fit": "clamp",
   "files": "all"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "How long is a 2 inch sanitary clamp tee?",
   "a": "177.8 mm (7.0 in) face to face on the run, 88.9 mm (3.5 in) centre to branch face."
  },
  {
   "q": "What is a short-outlet tee?",
   "a": "A tee whose branch is only as long as its flange needs: 41.3 mm (1.625 in) centre to face on 2 in, against 88.9 for the equal tee."
  }
 ],
 "files_license": null,
 "offers": [
  {
   "file": "tee-0.5in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-0.5in.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-0.5in.stl",
   "note": "½ in equal tee (7MP): run 2.5 in face to face, branch 1.25 in centre to face"
  },
  {
   "file": "tee-0.75in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-0.75in.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-0.75in.stl",
   "note": "¾ in equal tee (7MP): run 4.75 in face to face, branch 2.375 in centre to face"
  },
  {
   "file": "tee-1in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-1in.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-1in.stl",
   "note": "1 in equal tee (7MP): run 4.75 in face to face, branch 2.375 in centre to face"
  },
  {
   "file": "tee-short-1in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-short-1in.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-short-1in.stl",
   "note": "1 in short-outlet tee (7MPS): run 4.75 in, branch 1.125 in centre to face"
  },
  {
   "file": "tee-1.5in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-1.5in.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-1.5in.stl",
   "note": "1½ in equal tee (7MP): run 5.5 in face to face, branch 2.75 in centre to face"
  },
  {
   "file": "tee-short-1.5in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-short-1.5in.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-short-1.5in.stl",
   "note": "1½ in short-outlet tee (7MPS): run 5.5 in, branch 1.375 in centre to face"
  },
  {
   "file": "tee-2in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-2in.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-2in.stl",
   "note": "2 in equal tee (7MP): run 7.0 in face to face, branch 3.5 in centre to face"
  },
  {
   "file": "tee-short-2in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-short-2in.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-short-2in.stl",
   "note": "2 in short-outlet tee (7MPS): run 7.0 in, branch 1.625 in centre to face"
  },
  {
   "file": "tee-2.5in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-2.5in.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-2.5in.stl",
   "note": "2½ in equal tee (7MP): run 7.0 in face to face, branch 3.5 in centre to face"
  },
  {
   "file": "tee-short-2.5in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-short-2.5in.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-short-2.5in.stl",
   "note": "2½ in short-outlet tee (7MPS): run 7.0 in, branch 1.875 in centre to face"
  },
  {
   "file": "tee-3in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-3in.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-3in.stl",
   "note": "3 in equal tee (7MP): run 7.5 in face to face, branch 3.75 in centre to face"
  },
  {
   "file": "tee-short-3in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-short-3in.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-short-3in.stl",
   "note": "3 in short-outlet tee (7MPS): run 7.5 in, branch 2.125 in centre to face"
  },
  {
   "file": "tee-4in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-4in.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-4in.stl",
   "note": "4 in equal tee (7MP): run 9.0 in face to face, branch 4.5 in centre to face"
  },
  {
   "file": "tee-short-4in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-short-4in.step",
   "stl": "https://xemstudio.com/files/hardware/sanitary-clamp-tees-crosses/tee-short-4in.stl",
   "note": "4 in short-outlet tee (7MPS): run 9.0 in, branch 2.75 in centre to face"
  }
 ],
 "markdown": "https://xemstudio.com/objects/sanitary-clamp-tees/index.md"
}