{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "snap-fit-hooks-and-catches",
 "name": "3D printable snap-fit hooks and catches: cantilever latch, permanent or releasable, 4 sizes (STL, STEP)",
 "kind": "hardware",
 "category": "3D printing",
 "group": "Snap fits & clips",
 "year": null,
 "question": "What size should a 3D printed snap-fit hook be, and is there a ready hook and catch I can drop into my design?",
 "tags": [
  "snap fit",
  "cantilever snap",
  "snap hook",
  "latch",
  "clip",
  "3d printed latch",
  "print in place",
  "stl",
  "step",
  "fdm"
 ],
 "aliases": [
  "3d printable snap fit",
  "snap fit latch stl",
  "cantilever snap fit hook",
  "releasable snap fit",
  "snap fit catch",
  "printable latch",
  "snap clip cad"
 ],
 "overall_mm": {
  "length": 13.4,
  "width": 16,
  "height": 40.057
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": false,
 "free_files": 12,
 "url": "https://xemstudio.com/objects/snap-fit-hooks-and-catches/",
 "sheet_txt": "https://xemstudio.com/objects/snap-fit-hooks-and-catches/sheet.txt",
 "sheet": {
  "basis": "Straight cantilever snap fit per the Bayer snap-fit design guide: peak strain ε = 1.5·t·y/L². Xem design, zero clearance.",
  "overall_mm": {
   "length": 13.4,
   "width": 16,
   "height": 40.057
  },
  "notes": [
   "Strain at full deflection: S 1.4 %, M 1.3 %, L 1.2 %, XL 1.2 %, under the ~2 % limit for PLA/PETG.",
   "Permanent hooks have a 90° back face; releasable hooks a 45° back face. Lead-in 30° from vertical on all.",
   "The catch ledge top sits at z = L with its edge at x = t: place the catch so it touches the hook beam.",
   "Print the hook on its side so the beam bends within the layers. Add 0.1–0.2 mm clearance on the catch edge for FDM."
  ],
  "table": {
   "columns": [
    "file",
    "L × t × w mm",
    "undercut y mm",
    "overall mm"
   ],
   "rows": [
    [
     "snap-hook-s-permanent",
     "10 × 1.2 × 6",
     "0.8",
     "10 × 10 × 14.886"
    ],
    [
     "snap-hook-s-releasable",
     "10 × 1.2 × 6",
     "0.8",
     "10 × 10 × 15.686"
    ],
    [
     "snap-catch-s",
     "10 × 1.2 × 6",
     "catch",
     "12 × 10 × 10"
    ],
    [
     "snap-hook-m-permanent",
     "15 × 1.6 × 8",
     "1.2",
     "10.8 × 12 × 20.578"
    ],
    [
     "snap-hook-m-releasable",
     "15 × 1.6 × 8",
     "1.2",
     "10.8 × 12 × 21.778"
    ],
    [
     "snap-catch-m",
     "15 × 1.6 × 8",
     "catch",
     "12 × 12 × 15"
    ],
    [
     "snap-hook-l-permanent",
     "20 × 2.0 × 10",
     "1.6",
     "11.6 × 14 × 26.271"
    ],
    [
     "snap-hook-l-releasable",
     "20 × 2.0 × 10",
     "1.6",
     "11.6 × 14 × 27.871"
    ],
    [
     "snap-catch-l",
     "20 × 2.0 × 10",
     "catch",
     "12 × 14 × 20"
    ],
    [
     "snap-hook-xl-permanent",
     "30 × 3.0 × 12",
     "2.4",
     "13.4 × 16 × 37.657"
    ],
    [
     "snap-hook-xl-releasable",
     "30 × 3.0 × 12",
     "2.4",
     "13.4 × 16 × 40.057"
    ],
    [
     "snap-catch-xl",
     "30 × 3.0 × 12",
     "catch",
     "12 × 16 × 30"
    ]
   ]
  }
 },
 "sheet_text": "3D printable snap-fit hooks and catches: cantilever latch, permanent or releasable, 4 sizes (STL, STEP) — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/snap-fit-hooks-and-catches/  (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/)\nBasis: Straight cantilever snap fit per the Bayer snap-fit design guide: peak strain ε = 1.5·t·y/L². Xem design, zero clearance.\nCatalog version: 2026-10-20\n\nOverall (mm): length 13.4, width 16.0, height 40.057\n- Strain at full deflection: S 1.4 %, M 1.3 %, L 1.2 %, XL 1.2 %, under the ~2 % limit for PLA/PETG.\n- Permanent hooks have a 90° back face; releasable hooks a 45° back face. Lead-in 30° from vertical on all.\n- The catch ledge top sits at z = L with its edge at x = t: place the catch so it touches the hook beam.\n- Print the hook on its side so the beam bends within the layers. Add 0.1–0.2 mm clearance on the catch edge for FDM.\n\nfile  L × t × w mm  undercut y mm  overall mm\nsnap-hook-s-permanent  10 × 1.2 × 6  0.8  10 × 10 × 14.886\nsnap-hook-s-releasable  10 × 1.2 × 6  0.8  10 × 10 × 15.686\nsnap-catch-s  10 × 1.2 × 6  catch  12 × 10 × 10\nsnap-hook-m-permanent  15 × 1.6 × 8  1.2  10.8 × 12 × 20.578\nsnap-hook-m-releasable  15 × 1.6 × 8  1.2  10.8 × 12 × 21.778\nsnap-catch-m  15 × 1.6 × 8  catch  12 × 12 × 15\nsnap-hook-l-permanent  20 × 2.0 × 10  1.6  11.6 × 14 × 26.271\nsnap-hook-l-releasable  20 × 2.0 × 10  1.6  11.6 × 14 × 27.871\nsnap-catch-l  20 × 2.0 × 10  catch  12 × 14 × 20\nsnap-hook-xl-permanent  30 × 3.0 × 12  2.4  13.4 × 16 × 37.657\nsnap-hook-xl-releasable  30 × 3.0 × 12  2.4  13.4 × 16 × 40.057\nsnap-catch-xl  30 × 3.0 × 12  catch  12 × 16 × 30\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- Bayer MaterialScience: Snap-Fit Joints for Plastics: A Design Guide — web — Publisher's page; dimensions are facts — https://fab.cba.mit.edu/classes/S62.12/people/vernelle.noel/Plastic_Snap_fit_design.pdf\n- Fictiv: How to Design Snap Fit Components — web — Publisher's page; dimensions are facts — https://www.fictiv.com/articles/how-to-design-snap-fit-components\n\nFree files (Xem Studio Design License, Xem Studio; STEP + STL, 12 parts): https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/index.json\nAPI: https://xemstudio.com/api/geometry?object=snap-fit-hooks-and-catches\n",
 "sources": [
  {
   "publisher": "Bayer MaterialScience",
   "title": "Snap-Fit Joints for Plastics: A Design Guide",
   "url": "https://fab.cba.mit.edu/classes/S62.12/people/vernelle.noel/Plastic_Snap_fit_design.pdf",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Fictiv",
   "title": "How to Design Snap Fit Components",
   "url": "https://www.fictiv.com/articles/how-to-design-snap-fit-components",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "snap-fit-cantilever-joint",
  "living-hinge",
  "print-in-place-push-button-flexure",
  "annular-snap-fit-caps",
  "side-release-buckles"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "hook head (undercut y)",
   "exact": "S 0.8 / M 1.2 / L 1.6 / XL 2.4 mm",
   "mates": "matching snap catch or a ledge in your part",
   "fit": "slide",
   "files": "all"
  },
  {
   "feature": "base plate",
   "exact": "3 mm thick, w + 4 wide",
   "mates": "glue, screw or merge into your part",
   "fit": "designed",
   "files": "hooks"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "How big should a snap-fit undercut be for 3D printing?",
   "a": "Size it from the strain: ε = 1.5·t·y/L² for a straight beam. Keep ε under about 2% for PLA and PETG; these hooks sit at 1.2–1.4%."
  },
  {
   "q": "Permanent or releasable snap fit?",
   "a": "Permanent has a 90° back face and will not pull out; releasable has a 45° back face and lets go under a firm pull."
  },
  {
   "q": "Which way should I print a snap hook?",
   "a": "Lay the beam so it bends across the layers, not between them: print the hook on its side, beam flat on the bed, for the strongest flex."
  },
  {
   "q": "How much clearance does a printed snap fit need?",
   "a": "These are zero clearance. Add about 0.1–0.2 mm on the catch edge for FDM."
  },
  {
   "q": "Can I resize the hook?",
   "a": "Scale L, t and y together so 1.5·t·y/L² stays under 2%, and keep t at least 2–3 nozzle widths."
  }
 ],
 "files_license": {
  "name": "Xem Studio Design License",
  "holder": "Xem Studio",
  "url": "https://xemstudio.com/license/",
  "note": "Xem Studio's own design: free to use, print, modify and sell things made from it; not to be republished or redistributed as files."
 },
 "offers": [
  {
   "file": "snap-hook-s-permanent",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-hook-s-permanent.step",
   "stl": "https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-hook-s-permanent.stl",
   "note": "Snap-fit hook, small: beam 10 mm long × 1.2 mm thick × 6 mm wide, 0.8 mm undercut, permanent (90° back face, locks for good), 30° lead-in, 3 mm base plate"
  },
  {
   "file": "snap-hook-s-releasable",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-hook-s-releasable.step",
   "stl": "https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-hook-s-releasable.stl",
   "note": "Snap-fit hook, small: beam 10 mm long × 1.2 mm thick × 6 mm wide, 0.8 mm undercut, releasable (45° back face, pulls apart), 30° lead-in, 3 mm base plate"
  },
  {
   "file": "snap-catch-s",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-catch-s.step",
   "stl": "https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-catch-s.stl",
   "note": "Catch for the small hook: ledge top at 10 mm, edge flush with the hook beam (zero clearance), 10 mm wide"
  },
  {
   "file": "snap-hook-m-permanent",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-hook-m-permanent.step",
   "stl": "https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-hook-m-permanent.stl",
   "note": "Snap-fit hook, medium: beam 15 mm long × 1.6 mm thick × 8 mm wide, 1.2 mm undercut, permanent (90° back face, locks for good), 30° lead-in, 3 mm base plate"
  },
  {
   "file": "snap-hook-m-releasable",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-hook-m-releasable.step",
   "stl": "https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-hook-m-releasable.stl",
   "note": "Snap-fit hook, medium: beam 15 mm long × 1.6 mm thick × 8 mm wide, 1.2 mm undercut, releasable (45° back face, pulls apart), 30° lead-in, 3 mm base plate"
  },
  {
   "file": "snap-catch-m",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-catch-m.step",
   "stl": "https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-catch-m.stl",
   "note": "Catch for the medium hook: ledge top at 15 mm, edge flush with the hook beam (zero clearance), 12 mm wide"
  },
  {
   "file": "snap-hook-l-permanent",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-hook-l-permanent.step",
   "stl": "https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-hook-l-permanent.stl",
   "note": "Snap-fit hook, large: beam 20 mm long × 2.0 mm thick × 10 mm wide, 1.6 mm undercut, permanent (90° back face, locks for good), 30° lead-in, 3 mm base plate"
  },
  {
   "file": "snap-hook-l-releasable",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-hook-l-releasable.step",
   "stl": "https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-hook-l-releasable.stl",
   "note": "Snap-fit hook, large: beam 20 mm long × 2.0 mm thick × 10 mm wide, 1.6 mm undercut, releasable (45° back face, pulls apart), 30° lead-in, 3 mm base plate"
  },
  {
   "file": "snap-catch-l",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-catch-l.step",
   "stl": "https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-catch-l.stl",
   "note": "Catch for the large hook: ledge top at 20 mm, edge flush with the hook beam (zero clearance), 14 mm wide"
  },
  {
   "file": "snap-hook-xl-permanent",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-hook-xl-permanent.step",
   "stl": "https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-hook-xl-permanent.stl",
   "note": "Snap-fit hook, extra large: beam 30 mm long × 3.0 mm thick × 12 mm wide, 2.4 mm undercut, permanent (90° back face, locks for good), 30° lead-in, 3 mm base plate"
  },
  {
   "file": "snap-hook-xl-releasable",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-hook-xl-releasable.step",
   "stl": "https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-hook-xl-releasable.stl",
   "note": "Snap-fit hook, extra large: beam 30 mm long × 3.0 mm thick × 12 mm wide, 2.4 mm undercut, releasable (45° back face, pulls apart), 30° lead-in, 3 mm base plate"
  },
  {
   "file": "snap-catch-xl",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-catch-xl.step",
   "stl": "https://xemstudio.com/files/3d-printing/snap-fit-hooks-and-catches/snap-catch-xl.stl",
   "note": "Catch for the extra large hook: ledge top at 30 mm, edge flush with the hook beam (zero clearance), 16 mm wide"
  }
 ],
 "markdown": "https://xemstudio.com/objects/snap-fit-hooks-and-catches/index.md"
}