{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "tri-clamp-burner-drum",
 "name": "Burner drum for one or three vertical 2 in tri-clamp tubes",
 "kind": "hardware",
 "category": "Hardware",
 "group": "Heat transfer",
 "year": null,
 "question": "What burner drum heats several 2 inch tubes with one torch?",
 "tags": [
  "burner",
  "shroud",
  "drum",
  "torch",
  "flue",
  "thermoacoustic",
  "tri-clamp",
  "long earth society"
 ],
 "aliases": [
  "burner shroud three tubes",
  "torch shroud vertical tube middle",
  "propane burner drum thermoacoustic"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": true,
 "free_files": 4,
 "url": "https://xemstudio.com/objects/tri-clamp-burner-drum/",
 "sheet_txt": "https://xemstudio.com/objects/tri-clamp-burner-drum/sheet.txt",
 "sheet": {
  "basis": "Hole and tube positions from the engine layouts in tools/gen_ta_power.py; Ø66 holes pass over a 2 in ferrule (Ø64)",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "A closed drum split across its height: the lower half carries a Ø40 flue straight down to a torch standing on the bench (the hot gas rises up it), the upper half the vents. The tubes pass through Ø66 holes, so each half slides over a 2 in ferrule; the halves join with three M4 × 20 through their tabs.",
   "Ring engine: one drum Ø256 round all three cores' hot zones, flue at the centre between them. Twin engine: a Ø130 drum with its flue in front of the core.",
   "Inside height 40: room for the optional fin sleeves. The annulus round each tube at the holes is a designed gap (3.6 mm).",
   "It runs at flame temperature; what it is made of is the builder's choice."
  ],
  "table": {
   "columns": [
    "file",
    "diameter_mm",
    "flue_mm"
   ],
   "rows": [
    [
     "drum-ring-lower",
     256,
     480.1
    ],
    [
     "drum-single-lower",
     130,
     403.7
    ]
   ]
  }
 },
 "sheet_text": "Burner drum for one or three vertical 2 in tri-clamp tubes — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/tri-clamp-burner-drum/  (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/)\nBasis: Hole and tube positions from the engine layouts in tools/gen_ta_power.py; Ø66 holes pass over a 2 in ferrule (Ø64)\nCatalog version: 2026-10-20\n\nSizes: see table below\n- A closed drum split across its height: the lower half carries a Ø40 flue straight down to a torch standing on the bench (the hot gas rises up it), the upper half the vents. The tubes pass through Ø66 holes, so each half slides over a 2 in ferrule; the halves join with three M4 × 20 through their tabs.\n- Ring engine: one drum Ø256 round all three cores' hot zones, flue at the centre between them. Twin engine: a Ø130 drum with its flue in front of the core.\n- Inside height 40: room for the optional fin sleeves. The annulus round each tube at the holes is a designed gap (3.6 mm).\n- It runs at flame temperature; what it is made of is the builder's choice.\n\nfile  diameter_mm  flue_mm\ndrum-ring-lower  256.0  480.1\ndrum-single-lower  130.0  403.7\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- Xem Studio: tools/gen_ta_power.py: the network model and every dimension on this page — code — CC BY 4.0 — https://xemstudio.com/\n- Long Earth Society: Engine builds — web, video — LES site — https://longearthsociety.com/engineering/\n\nFree files (Xem Studio Design License, Xem Studio; STEP + STL, 4 parts): https://xemstudio.com/files/hardware/tri-clamp-burner-drum/index.json\nAPI: https://xemstudio.com/api/geometry?object=tri-clamp-burner-drum\n",
 "sources": [
  {
   "publisher": "Xem Studio",
   "title": "tools/gen_ta_power.py: the network model and every dimension on this page",
   "url": "https://xemstudio.com/",
   "formats": [
    "code"
   ],
   "license": "CC BY 4.0",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Long Earth Society",
   "title": "Engine builds",
   "url": "https://longearthsociety.com/engineering/",
   "formats": [
    "web",
    "video"
   ],
   "license": "LES site",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "tri-clamp-tube-heat-sink-2in",
  "tri-clamp-torch-stand",
  "tri-clamp-flame-shroud-vertical"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "tube holes",
   "exact": "Ø66",
   "mates": "2 in tube Ø50.8 (7.6 annulus, passes a Ø64 ferrule)",
   "fit": "designed",
   "files": "all"
  },
  {
   "feature": "tab holes",
   "exact": "Ø4.5",
   "mates": "M4 clearance (ISO 273 medium)",
   "fit": "designed",
   "files": "all"
  },
  {
   "feature": "flue",
   "exact": "Ø40 / Ø35",
   "mates": "torch flame (no contact)",
   "fit": "designed",
   "files": "drum-ring-lower"
  },
  {
   "feature": "flue",
   "exact": "Ø40 / Ø35",
   "mates": "torch flame (no contact)",
   "fit": "designed",
   "files": "drum-single-lower"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "Why a flue down to the bench?",
   "a": "The hot zones are half way up the cores, above the pistons; the flue brings the flame there while the torch stands safely on the bench."
  }
 ],
 "files_license": {
  "name": "Xem Studio Design License",
  "holder": "Xem Studio",
  "url": "https://xemstudio.com/license/",
  "note": "Xem Studio's own design: free to use, print, modify and sell things made from it; not to be republished or redistributed as files."
 },
 "offers": [
  {
   "file": "drum-ring-lower",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-burner-drum/drum-ring-lower.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-burner-drum/drum-ring-lower.stl",
   "note": "ring drum lower half: Ø256 × 22.5, walls 2.5, three Ø66 tube holes on r 80, Ø40 / Ø35 flue 480.1 down from the centre, 3 tabs"
  },
  {
   "file": "drum-ring-upper",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-burner-drum/drum-ring-upper.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-burner-drum/drum-ring-upper.stl",
   "note": "ring drum upper half: three Ø66 tube holes, 8 × Ø8 and Ø12 vents over the centre, 3 tabs"
  },
  {
   "file": "drum-single-lower",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-burner-drum/drum-single-lower.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-burner-drum/drum-single-lower.stl",
   "note": "single drum lower half: Ø130 centred 22 in front of the tube, Ø66 tube hole, flue 403.7 down at y 64"
  },
  {
   "file": "drum-single-upper",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-burner-drum/drum-single-upper.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-burner-drum/drum-single-upper.stl",
   "note": "single drum upper half: tube hole, vents over the flue"
  }
 ],
 "markdown": "https://xemstudio.com/objects/tri-clamp-burner-drum/index.md"
}