{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "tri-clamp-cap-flexure-seats",
 "name": "Tri-clamp end cap with Ø60, Ø80 and Ø100 flexure-spring seats",
 "kind": "hardware",
 "category": "Tri-clamp & pipe",
 "group": "Caps & heads",
 "year": null,
 "question": "What tri-clamp cap holds a flat spiral flexure spring?",
 "tags": [
  "free piston",
  "flexure",
  "tri-clamp",
  "stirling",
  "head",
  "long earth society"
 ],
 "aliases": [
  "free piston stirling tri clamp",
  "flexure bearing mount stirling",
  "tri clamp flexure head",
  "fpse head"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": true,
 "free_files": 3,
 "url": "https://xemstudio.com/objects/tri-clamp-cap-flexure-seats/",
 "sheet_txt": "https://xemstudio.com/objects/tri-clamp-cap-flexure-seats/sheet.txt",
 "sheet": {
  "basis": "ISO 2852 cap face; pedestal Ø = tube OD; plate Ø = flexure OD + 16 with a flexure-OD × 1 seat and 3 × Ø3.4 on the flexure rim-hole circle (0.88 × OD)",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "The head of the tri-clamp free-piston engine: it clamps on the spool's open ferrule and carries the piston's flexure stack (stack A).",
   "Base: 6 mm ISO 2852 cap, pedestal the tube's OD (38.1 / 50.8 / 76.2) to 14 mm so the clamp clears, then a plate 4 mm thick, Ø76 / Ø96 / Ø116. Overall 18 mm.",
   "On top: a seat Ø60 / Ø80 / Ø100 × 1 mm deep (the flexure OD) and three Ø3.4 holes on the flexure's rim-hole circle (Ø52.8 / Ø70.4 / Ø88). A centre window Ø19.2 / Ø23.6 / Ø28 (hub + 6) lets the rods through."
  ],
  "table": {
   "columns": [
    "spool_in",
    "flange_od_mm",
    "plate_od_mm",
    "flexure_seat_mm",
    "rim_hole_circle_mm",
    "window_mm",
    "height_mm"
   ],
   "rows": [
    [
     "1.5",
     50.5,
     76,
     "Ø60 × 1",
     52.8,
     19.2,
     18
    ],
    [
     "2",
     64,
     96,
     "Ø80 × 1",
     70.4,
     23.6,
     18
    ],
    [
     "3",
     91,
     116,
     "Ø100 × 1",
     88,
     28,
     18
    ]
   ]
  }
 },
 "sheet_text": "Tri-clamp end cap with Ø60, Ø80 and Ø100 flexure-spring seats — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/tri-clamp-cap-flexure-seats/  (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/)\nBasis: ISO 2852 cap face; pedestal Ø = tube OD; plate Ø = flexure OD + 16 with a flexure-OD × 1 seat and 3 × Ø3.4 on the flexure rim-hole circle (0.88 × OD)\nCatalog version: 2026-10-20\n\nSizes: see table below\n- The head of the tri-clamp free-piston engine: it clamps on the spool's open ferrule and carries the piston's flexure stack (stack A).\n- Base: 6 mm ISO 2852 cap, pedestal the tube's OD (38.1 / 50.8 / 76.2) to 14 mm so the clamp clears, then a plate 4 mm thick, Ø76 / Ø96 / Ø116. Overall 18 mm.\n- On top: a seat Ø60 / Ø80 / Ø100 × 1 mm deep (the flexure OD) and three Ø3.4 holes on the flexure's rim-hole circle (Ø52.8 / Ø70.4 / Ø88). A centre window Ø19.2 / Ø23.6 / Ø28 (hub + 6) lets the rods through.\n\nspool_in  flange_od_mm  plate_od_mm  flexure_seat_mm  rim_hole_circle_mm  window_mm  height_mm\n1.5  50.5  76  Ø60 × 1  52.8  19.2  18\n2  64.0  96  Ø80 × 1  70.4  23.6  18\n3  91.0  116  Ø100 × 1  88.0  28.0  18\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- NASA NTRS: Free-piston Stirling convertor flexure bearing development and life testing — pdf — US Government work — https://ntrs.nasa.gov/citations/20050182933\n- Long Earth Society: Tri-clamp Stirling engine builds — web, video — LES site — https://longearthsociety.com/engineering/\n- Wikipedia: Free-piston engine — web — CC BY-SA 4.0 (text) — https://en.wikipedia.org/wiki/Free-piston_engine\n\nFree files (Xem Studio Design License, Xem Studio; STEP + STL, 3 parts): https://xemstudio.com/files/hardware/tri-clamp-cap-flexure-seats/index.json\nAPI: https://xemstudio.com/api/geometry?object=tri-clamp-cap-flexure-seats\n",
 "sources": [
  {
   "publisher": "NASA NTRS",
   "title": "Free-piston Stirling convertor flexure bearing development and life testing",
   "url": "https://ntrs.nasa.gov/citations/20050182933",
   "formats": [
    "pdf"
   ],
   "license": "US Government work",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Long Earth Society",
   "title": "Tri-clamp Stirling engine builds",
   "url": "https://longearthsociety.com/engineering/",
   "formats": [
    "web",
    "video"
   ],
   "license": "LES site",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Wikipedia",
   "title": "Free-piston engine",
   "url": "https://en.wikipedia.org/wiki/Free-piston_engine",
   "formats": [
    "web"
   ],
   "license": "CC BY-SA 4.0 (text)",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "spiral-flexure-bearing",
  "tri-clamp-flexure-ring",
  "flexure-hub-collar",
  "tri-clamp-piston-plug",
  "linear-alternator-mover",
  "tri-clamp-clamps"
 ],
 "fits": [
  {
   "role": "Parts that fit it",
   "items": [
    {
     "slug": "linear-alternator-housing",
     "why": "on standoffs on the flexure head's rim screws"
    },
    {
     "slug": "tube-piston-rods-5mm",
     "why": "Ø5 OD in the piston plug socket"
    }
   ]
  },
  {
   "role": "Goes in or on",
   "items": [
    {
     "slug": "tri-clamp-spool",
     "why": "ISO 2852 face on the open ferrule"
    }
   ]
  },
  {
   "role": "Connects to",
   "items": [
    {
     "slug": "spiral-flexure-bearing",
     "why": "leaf rim in the flexure-OD seat, 3 × M3"
    },
    {
     "slug": "tri-clamp-flexure-ring",
     "why": "3 × M3 standoffs to the ring above"
    },
    {
     "slug": "linear-alternator-mover",
     "why": "alternator housing on the same three rim holes"
    }
   ]
  },
  {
   "role": "Also needed",
   "items": [
    {
     "slug": "tri-clamp-clamps",
     "why": "clamp and gasket on the face"
    }
   ]
  }
 ],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "flexure pocket in the head / ring",
   "exact": "flexure OD",
   "mates": "spiral flexure leaf rim",
   "fit": "slide",
   "files": "fp-flexure-"
  },
  {
   "feature": "head face",
   "exact": "ISO 2852",
   "mates": "ferrule face + Type B gasket",
   "fit": "clamp",
   "files": "fp-flexure-head-"
  },
  {
   "feature": "piston pocket",
   "exact": "bore Ø × 1.6 inside the bore",
   "mates": "free piston skirt at full stroke (no contact)",
   "fit": "designed",
   "files": "fp-flexure-head-"
  },
  {
   "feature": "rim holes (head, ring)",
   "exact": "Ø3.4",
   "mates": "M3 screw clearance",
   "fit": "designed",
   "files": "fp-flexure-"
  },
  {
   "feature": "head / ring window",
   "exact": "hub + 12 (Ø29.6 on Ø80)",
   "mates": "hub collars and their pinch-screw heads (no contact)",
   "fit": "designed",
   "files": "fp-flexure-"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "What flexure size goes on a 2 inch tri-clamp spool?",
   "a": "Ø80 leaves on the 2 in flexure head (Ø96 plate); Ø60 on 1.5 in, Ø100 on 3 in."
  },
  {
   "q": "How are the flexures held on the head?",
   "a": "The leaf rim sits in the 1 mm deep seat and three M3 screws pass the Ø3.4 holes on the Ø70.4 circle (2 in) through the stack's spacers and clamp plate."
  }
 ],
 "files_license": {
  "name": "Xem Studio Design License",
  "holder": "Xem Studio",
  "url": "https://xemstudio.com/license/",
  "note": "Xem Studio's own design: free to use, print, modify and sell things made from it; not to be republished or redistributed as files."
 },
 "offers": [
  {
   "file": "fp-flexure-head-1.5in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-cap-flexure-seats/fp-flexure-head-1.5in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-cap-flexure-seats/fp-flexure-head-1.5in.stl",
   "note": "1.5 in flexure head: ISO 2852 cap face, Ø38.1 pedestal clearing the clamp, Ø76 plate with a Ø60 × 1 pocket (= flexure OD), a Ø25.2 window for the hub collars and 3 × M3 (Ø3.4) on the Ø60 flexure's rim holes; a piston pocket the bore's Ø × 1.6 inside the bore (the ISO 2852 face stays flat from the bore out); the piston's stack A bolts on it"
  },
  {
   "file": "fp-flexure-head-2in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-cap-flexure-seats/fp-flexure-head-2in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-cap-flexure-seats/fp-flexure-head-2in.stl",
   "note": "2 in flexure head: ISO 2852 cap face, Ø50.8 pedestal clearing the clamp, Ø96 plate with a Ø80 × 1 pocket (= flexure OD), a Ø29.6 window for the hub collars and 3 × M3 (Ø3.4) on the Ø80 flexure's rim holes; a piston pocket the bore's Ø × 1.6 inside the bore (the ISO 2852 face stays flat from the bore out); the piston's stack A bolts on it"
  },
  {
   "file": "fp-flexure-head-3in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-cap-flexure-seats/fp-flexure-head-3in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-cap-flexure-seats/fp-flexure-head-3in.stl",
   "note": "3 in flexure head: ISO 2852 cap face, Ø76.2 pedestal clearing the clamp, Ø116 plate with a Ø100 × 1 pocket (= flexure OD), a Ø34 window for the hub collars and 3 × M3 (Ø3.4) on the Ø100 flexure's rim holes; a piston pocket the bore's Ø × 1.6 inside the bore (the ISO 2852 face stays flat from the bore out); the piston's stack A bolts on it"
  }
 ],
 "markdown": "https://xemstudio.com/objects/tri-clamp-cap-flexure-seats/index.md"
}