{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "tri-clamp-cap-water-tray-10in",
 "name": "Water tray for a 10 in cold cap (optional)",
 "kind": "hardware",
 "category": "Hardware",
 "group": "Heat transfer",
 "year": null,
 "question": "What water tray sits on a 10 inch tri-clamp cap?",
 "tags": [
  "water tray",
  "cooler",
  "htd",
  "heat exchanger"
 ],
 "aliases": [
  "stirling water cooled top plate"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": true,
 "free_files": 1,
 "url": "https://xemstudio.com/objects/tri-clamp-cap-water-tray-10in/",
 "sheet_txt": "https://xemstudio.com/objects/tri-clamp-cap-water-tray-10in/sheet.txt",
 "sheet": {
  "basis": "Exact geometry",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "A separate heat exchanger, optional: an open ring tray that sits on the cold cap's flat top round the 2 in ferrule and holds water. The cap takes about the cup wall's leak plus the engine's rejected heat (a few hundred watts at full fire), so the water warms and has to be topped up; ice water helps. The engine runs without it, hotter on the cold side."
  ],
  "table": {
   "columns": [
    "id_mm",
    "od_mm",
    "height_mm"
   ],
   "rows": [
    [
     118,
     190,
     40
    ]
   ]
  }
 },
 "sheet_text": "Water tray for a 10 in cold cap (optional) — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/tri-clamp-cap-water-tray-10in/  (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/)\nBasis: Exact geometry\nCatalog version: 2026-10-20\n\nSizes: see table below\n- A separate heat exchanger, optional: an open ring tray that sits on the cold cap's flat top round the 2 in ferrule and holds water. The cap takes about the cup wall's leak plus the engine's rejected heat (a few hundred watts at full fire), so the water warms and has to be topped up; ice water helps. The engine runs without it, hotter on the cold side.\n\nid_mm  od_mm  height_mm\n118.0  190.0  40.0\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- Long Earth Society: Engine builds — web, video — LES site — https://longearthsociety.com/engineering/\n\nFree files (Xem Studio Design License, Xem Studio; STEP + STL, 1 parts): https://xemstudio.com/files/hardware/tri-clamp-cap-water-tray-10in/index.json\nAPI: https://xemstudio.com/api/geometry?object=tri-clamp-cap-water-tray-10in\n",
 "sources": [
  {
   "publisher": "Long Earth Society",
   "title": "Engine builds",
   "url": "https://longearthsociety.com/engineering/",
   "formats": [
    "web",
    "video"
   ],
   "license": "LES site",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "tri-clamp-cap-10in-2in-ferrule"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "floor",
   "exact": "Ø118–Ø190",
   "mates": "cold cap flat top (sits on it)",
   "fit": "designed",
   "files": "all"
  },
  {
   "feature": "ID",
   "exact": "Ø118",
   "mates": "2 in ferrule, clamp and gauge boss (no contact)",
   "fit": "designed",
   "files": "all"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "Does the engine need the tray?",
   "a": "No, but the cold side runs hotter and the output drops without it."
  }
 ],
 "files_license": {
  "name": "Xem Studio Design License",
  "holder": "Xem Studio",
  "url": "https://xemstudio.com/license/",
  "note": "Xem Studio's own design: free to use, print, modify and sell things made from it; not to be republished or redistributed as files."
 },
 "offers": [
  {
   "file": "water-tray-10in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-cap-water-tray-10in/water-tray-10in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-cap-water-tray-10in/water-tray-10in.stl",
   "note": "water tray (heat exchanger, optional): ring Ø118/Ø190 × 40, 2 walls and floor, sits on the cap's flat top"
  }
 ],
 "markdown": "https://xemstudio.com/objects/tri-clamp-cap-water-tray-10in/index.md"
}