{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "tri-clamp-cross-shaft-housing-insert",
 "name": "2 in tri-clamp cross insert with a rod guide and shaft chamber",
 "kind": "hardware",
 "category": "Tri-clamp & pipe",
 "group": "Inserts & liners",
 "year": null,
 "question": "What insert turns a 2 inch tri-clamp cross into a sealed shaft housing?",
 "tags": [
  "filler",
  "guide",
  "crankcase",
  "dead volume",
  "cross",
  "tri-clamp",
  "stirling",
  "long earth society"
 ],
 "aliases": [
  "tri clamp cross insert",
  "displacer rod guide tri clamp",
  "crankcase filler stirling",
  "reduce dead volume cross"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": true,
 "free_files": 1,
 "url": "https://xemstudio.com/objects/tri-clamp-cross-shaft-housing-insert/",
 "sheet_txt": "https://xemstudio.com/objects/tri-clamp-cross-shaft-housing-insert/sheet.txt",
 "sheet": {
  "basis": "ASME BPE 2 in bore Ø47.5; ISO 2852 Type B lip (Ø45.3, 1.4 from the joint plane, T2 2.8 long); slot, chamber and gap sizes are design values from the crank and con-rods",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "One piece that fills the run of a 2 in cross with the working gas still free to move. It drops in from the top, stands on the lower gasket's lip and passes the lip with a Ø45.3 spigot that ends level with the lip's lower face.",
   "Lower run: a Ø3 bore 30.15 mm long is the displacer-rod guide (running fit). Above it a column for the displacer's rod clevis and a slab for its con-rod; two Ø8 passages carry the gas from under the insert to the crank chamber; a Ø18 pocket at the bottom takes the displacer cap's boss at the top of its stroke.",
   "Middle: a Ø29 chamber straight through along the branch axis; the two branch plugs' noses fill its ends up to the crank. Upper run: slab and column for the diaphragm con-rod and clevis, a Ø22 pocket for the centre disc and nuts, and a cone that stays 1 mm under the membrane at full inward travel.",
   "Fits: Ø47.5 slide in the bore; spigot touches the lip's Ø45.3; Ø3 guide run on the rod. Chamber, slots and the gap under the membrane are designed."
  ],
  "table": {
   "columns": [
    "feature",
    "value"
   ],
   "rows": [
    [
     "outside",
     "Ø47.5, -88.35 to 88.25 from the cross centre"
    ],
    [
     "spigot",
     "Ø45.3 to -91.15"
    ],
    [
     "guide",
     "Ø3 × 30.15"
    ],
    [
     "crank chamber",
     "Ø29 along X"
    ],
    [
     "gas passages",
     "2 × Ø8"
    ],
    [
     "gap under the membrane",
     "1 at ±6 travel"
    ]
   ]
  }
 },
 "sheet_text": "2 in tri-clamp cross insert with a rod guide and shaft chamber — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/tri-clamp-cross-shaft-housing-insert/  (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/)\nBasis: ASME BPE 2 in bore Ø47.5; ISO 2852 Type B lip (Ø45.3, 1.4 from the joint plane, T2 2.8 long); slot, chamber and gap sizes are design values from the crank and con-rods\nCatalog version: 2026-10-20\n\nSizes: see table below\n- One piece that fills the run of a 2 in cross with the working gas still free to move. It drops in from the top, stands on the lower gasket's lip and passes the lip with a Ø45.3 spigot that ends level with the lip's lower face.\n- Lower run: a Ø3 bore 30.15 mm long is the displacer-rod guide (running fit). Above it a column for the displacer's rod clevis and a slab for its con-rod; two Ø8 passages carry the gas from under the insert to the crank chamber; a Ø18 pocket at the bottom takes the displacer cap's boss at the top of its stroke.\n- Middle: a Ø29 chamber straight through along the branch axis; the two branch plugs' noses fill its ends up to the crank. Upper run: slab and column for the diaphragm con-rod and clevis, a Ø22 pocket for the centre disc and nuts, and a cone that stays 1 mm under the membrane at full inward travel.\n- Fits: Ø47.5 slide in the bore; spigot touches the lip's Ø45.3; Ø3 guide run on the rod. Chamber, slots and the gap under the membrane are designed.\n\nfeature  value\noutside  Ø47.5, -88.35 to 88.25 from the cross centre\nspigot  Ø45.3 to -91.15\nguide  Ø3 × 30.15\ncrank chamber  Ø29 along X\ngas passages  2 × Ø8\ngap under the membrane  1 at ±6 travel\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- ISO (via iTeh sample): ISO 2852 clamp liners: face profile and flange / groove diameters — PDF — standard excerpt; dimensions are facts — https://cdn.standards.iteh.ai/samples/7850/eb49c396488d408c8ced3e2961d76cf3/ISO-2852-1974.pdf\n- ASME: BPE Bioprocessing Equipment (clamp fitting dimensions, tube OD and wall) — standard — ASME; dimensions are facts [verify license at link] — https://www.asme.org/codes-standards/find-codes-standards/bpe-bioprocessing-equipment\n- Long Earth Society: Engine builds — web, video — LES site — https://longearthsociety.com/engineering/\n\nFree files (Xem Studio Design License, Xem Studio; STEP + STL, 1 parts): https://xemstudio.com/files/hardware/tri-clamp-cross-shaft-housing-insert/index.json\nAPI: https://xemstudio.com/api/geometry?object=tri-clamp-cross-shaft-housing-insert\n",
 "sources": [
  {
   "publisher": "ISO (via iTeh sample)",
   "title": "ISO 2852 clamp liners: face profile and flange / groove diameters",
   "url": "https://cdn.standards.iteh.ai/samples/7850/eb49c396488d408c8ced3e2961d76cf3/ISO-2852-1974.pdf",
   "formats": [
    "PDF"
   ],
   "license": "standard excerpt; dimensions are facts",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "ASME",
   "title": "BPE Bioprocessing Equipment (clamp fitting dimensions, tube OD and wall)",
   "url": "https://www.asme.org/codes-standards/find-codes-standards/bpe-bioprocessing-equipment",
   "formats": [
    "standard"
   ],
   "license": "ASME; dimensions are facts",
   "license_verified": false,
   "hosted": false
  },
  {
   "publisher": "Long Earth Society",
   "title": "Engine builds",
   "url": "https://longearthsociety.com/engineering/",
   "formats": [
    "web",
    "video"
   ],
   "license": "LES site",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "tri-clamp-cross-branch-plug",
  "two-throw-crank-webs-3mm",
  "sanitary-clamp-crosses",
  "tri-clamp-volume-filler"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "outside",
   "exact": "Ø47.5",
   "mates": "2 in cross run bore",
   "fit": "slide",
   "files": "all"
  },
  {
   "feature": "spigot",
   "exact": "Ø45.3",
   "mates": "Type B gasket lip (ID 45.3)",
   "fit": "slide",
   "files": "all"
  },
  {
   "feature": "displacer-rod guide",
   "exact": "Ø3 × 31.55",
   "mates": "Ø3 displacer rod (crankshaft-3x60): runs in it",
   "fit": "run",
   "files": "all"
  },
  {
   "feature": "crank chamber",
   "exact": "Ø29 along the branch axis",
   "mates": "branch-plug noses; crank sweep R 13",
   "fit": "designed",
   "files": "all"
  },
  {
   "feature": "con-rod slabs and clevis columns",
   "exact": "7 × 18 and 9 × 18 slabs, 13 × 11 boxes, Ø12 round columns",
   "mates": "con-rods and rod clevises in motion",
   "fit": "designed",
   "files": "all"
  },
  {
   "feature": "membrane cone",
   "exact": "1.0 under the membrane at ±6 travel; Ø22 disc pocket",
   "mates": "centre disc, nuts and boss at full inward travel",
   "fit": "designed",
   "files": "all"
  },
  {
   "feature": "gas passages",
   "exact": "2 × Ø8",
   "mates": "gas path from the displacer to the crank chamber",
   "fit": "designed",
   "files": "all"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "Why fill the cross?",
   "a": "The open 2 in cross holds about 0.55 L of gas; the engine sweeps about 11 mL. Every bit of unswept gas lowers the pressure swing."
  },
  {
   "q": "Where does the gas go?",
   "a": "Up past the displacer, through the two Ø8 passages and the slots into the crank chamber, and up the diaphragm slot to the membrane."
  }
 ],
 "files_license": {
  "name": "Xem Studio Design License",
  "holder": "Xem Studio",
  "url": "https://xemstudio.com/license/",
  "note": "Xem Studio's own design: free to use, print, modify and sell things made from it; not to be republished or redistributed as files."
 },
 "offers": [
  {
   "file": "crankcase-insert-2in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-cross-shaft-housing-insert/crankcase-insert-2in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-cross-shaft-housing-insert/crankcase-insert-2in.stl",
   "note": "2 in cross crankcase insert: Ø47.5 from the lower lip (-88.35) to the rim (88.25), Ø45.3 spigot to -91.15 (from the cross centre); Ø29 crank chamber along the branches; Ø3 guide 30.15 long; two Ø8 gas passages; membrane cone 1 under full inward travel"
  }
 ],
 "markdown": "https://xemstudio.com/objects/tri-clamp-cross-shaft-housing-insert/index.md"
}