{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "tri-clamp-dished-bottom-vessels",
 "name": "Tri-clamp vessels with a dished or round welded bottom: 4, 6 and 8 in, 12 to 24 in deep",
 "kind": "hardware",
 "category": "Tri-clamp & pipe",
 "group": "Clamp fittings",
 "year": null,
 "question": "What does a 6 inch × 18 inch tri-clamp vessel with a rounded bottom look like?",
 "tags": [
  "vessel",
  "pot",
  "fermenter",
  "closed end",
  "dished head",
  "brew pot",
  "sanitary",
  "tri-clamp",
  "clamp fitting",
  "brewing",
  "homebrew"
 ],
 "aliases": [
  "6 inch tri clamp fermenter",
  "tri clamp pot",
  "6 x 18 tri clamp vessel",
  "tri clamp closed end spool rounded bottom",
  "sanitary vessel dished bottom",
  "tri clamp brew kettle"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": false,
 "free_files": 18,
 "url": "https://xemstudio.com/objects/tri-clamp-dished-bottom-vessels/",
 "sheet_txt": "https://xemstudio.com/objects/tri-clamp-dished-bottom-vessels/sheet.txt",
 "sheet": {
  "basis": "Xem Studio design: sanitary tube (4 in 4.000 × 0.083, 6 in 6.000 × 0.109, 8 in 8.000 × 0.109) with a clamp face on top and a welded head on the bottom: flanged-and-dished (crown radius = OD, knuckle 6 % of OD) or hemispherical",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "A closed pot made from sanitary tube: welded bottom, clamp face on top, so any cap, dome lid, thermowell cap or ported cap of the same size closes it. The 6 in × 18 in is a small fermenter or brew pot; depth is measured from the clamp face to the outside of the bottom.",
   "Dished (F&D) bottoms are shallow and stand on a ring; round bottoms are deeper and drain to one point.",
   "Every clamp face is the ISO 2852 profile used across this site: 2.85 mm rim, flat face with the gasket groove (K 1.6 deep, R3 1.2 bottom, 23° walls, P2 0.8 edges) on C2, 20° back cone. Flange C3 / groove C2 / tube OD × wall, mm: ½–¾ in 25.0 / 20.4 (derived) / 12.7–19.05 × 1.65; 1–1½ in 50.5 / 43.5 / 25.4–38.1 × 1.65; 2 in 64.0 / 56.5 / 50.8 × 1.65; 2½ in 77.5 / 70.5 / 63.5 × 1.65; 3 in 91.0 / 83.5 / 76.2 × 1.65; 4 in 119.0 / 110.0 / 101.6 × 2.11; 6 in 166.9 (6.570 in) / 156.5 / 152.4 × 2.77; 8 in 217.7 (8.570 in) / 207.0 / 203.2 × 2.77; 10 in 268.5 / 261.0 / 254.0 × 3.40; 12 in 319.3 / 311.8 / 304.8 × 3.40."
  ],
  "table": {
   "columns": [
    "size_in",
    "tube_od_mm",
    "wall_mm",
    "dished_bottom_h_mm",
    "round_bottom_h_mm",
    "depths_in"
   ],
   "rows": [
    [
     "4",
     101.6,
     2.11,
     17.2,
     50.8,
     "12, 18, 24"
    ],
    [
     "6",
     152.4,
     2.77,
     25.8,
     76.2,
     "12, 18, 24"
    ],
    [
     "8",
     203.2,
     2.77,
     34.4,
     101.6,
     "12, 18, 24"
    ]
   ]
  }
 },
 "sheet_text": "Tri-clamp vessels with a dished or round welded bottom: 4, 6 and 8 in, 12 to 24 in deep — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/tri-clamp-dished-bottom-vessels/  (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/)\nBasis: Xem Studio design: sanitary tube (4 in 4.000 × 0.083, 6 in 6.000 × 0.109, 8 in 8.000 × 0.109) with a clamp face on top and a welded head on the bottom: flanged-and-dished (crown radius = OD, knuckle 6 % of OD) or hemispherical\nCatalog version: 2026-10-20\n\nSizes: see table below\n- A closed pot made from sanitary tube: welded bottom, clamp face on top, so any cap, dome lid, thermowell cap or ported cap of the same size closes it. The 6 in × 18 in is a small fermenter or brew pot; depth is measured from the clamp face to the outside of the bottom.\n- Dished (F&D) bottoms are shallow and stand on a ring; round bottoms are deeper and drain to one point.\n- Every clamp face is the ISO 2852 profile used across this site: 2.85 mm rim, flat face with the gasket groove (K 1.6 deep, R3 1.2 bottom, 23° walls, P2 0.8 edges) on C2, 20° back cone. Flange C3 / groove C2 / tube OD × wall, mm: ½–¾ in 25.0 / 20.4 (derived) / 12.7–19.05 × 1.65; 1–1½ in 50.5 / 43.5 / 25.4–38.1 × 1.65; 2 in 64.0 / 56.5 / 50.8 × 1.65; 2½ in 77.5 / 70.5 / 63.5 × 1.65; 3 in 91.0 / 83.5 / 76.2 × 1.65; 4 in 119.0 / 110.0 / 101.6 × 2.11; 6 in 166.9 (6.570 in) / 156.5 / 152.4 × 2.77; 8 in 217.7 (8.570 in) / 207.0 / 203.2 × 2.77; 10 in 268.5 / 261.0 / 254.0 × 3.40; 12 in 319.3 / 311.8 / 304.8 × 3.40.\n\nsize_in  tube_od_mm  wall_mm  dished_bottom_h_mm  round_bottom_h_mm  depths_in\n4  101.6  2.11  17.2  50.8  12, 18, 24\n6  152.4  2.77  25.8  76.2  12, 18, 24\n8  203.2  2.77  34.4  101.6  12, 18, 24\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- ASME: Flanged and dished (F&D) heads: crown radius = OD, knuckle radius 6 % of OD (BPVC Section VIII torispherical head) — standard — ASME; proportions are facts [verify license at link] — https://www.asme.org/codes-standards/find-codes-standards/bpvc-viii-1-bpvc-section-viii-rules-for-construction-of-pressure-vessels-division-1\n- GW Kent: Tri-clamp fittings guide: tube OD, flange OD and ID per size to 12 in; solid cap thickness — web — publisher's guide; dimensions cited — https://www.gwkent.com/triclamp-guide\n- Rubber Fab: Tri-clamp dimensions chart (ID, OD, bead per clamp size, ½ to 12 in and DIN 32676) — PDF — publisher's chart; dimensions cited, nothing copied — https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf\n- Rubber Fab: Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50) — PDF — maker chart; dimensions are facts [verify license at link] — https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf\n\nFree files (Xem Studio Design License, Xem Studio; STEP + STL, 18 parts): https://xemstudio.com/files/hardware/tri-clamp-dished-bottom-vessels/index.json\nAPI: https://xemstudio.com/api/geometry?object=tri-clamp-dished-bottom-vessels\n",
 "sources": [
  {
   "publisher": "ASME",
   "title": "Flanged and dished (F&D) heads: crown radius = OD, knuckle radius 6 % of OD (BPVC Section VIII torispherical head)",
   "url": "https://www.asme.org/codes-standards/find-codes-standards/bpvc-viii-1-bpvc-section-viii-rules-for-construction-of-pressure-vessels-division-1",
   "formats": [
    "standard"
   ],
   "license": "ASME; proportions are facts",
   "license_verified": false,
   "hosted": false
  },
  {
   "publisher": "GW Kent",
   "title": "Tri-clamp fittings guide: tube OD, flange OD and ID per size to 12 in; solid cap thickness",
   "url": "https://www.gwkent.com/triclamp-guide",
   "formats": [
    "web"
   ],
   "license": "publisher's guide; dimensions cited",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Rubber Fab",
   "title": "Tri-clamp dimensions chart (ID, OD, bead per clamp size, ½ to 12 in and DIN 32676)",
   "url": "https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf",
   "formats": [
    "PDF"
   ],
   "license": "publisher's chart; dimensions cited, nothing copied",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Rubber Fab",
   "title": "Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50)",
   "url": "https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf",
   "formats": [
    "PDF"
   ],
   "license": "maker chart; dimensions are facts",
   "license_verified": false,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "tri-clamp-dome-lids",
  "tri-clamp-ported-end-caps",
  "tri-clamp-thermowells",
  "sanitary-clamp-clamps-6-8in",
  "sanitary-clamp-gaskets-6-8in"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [],
 "faq": [
  {
   "q": "How deep is the dished bottom on a 6 in vessel?",
   "a": "25.8 mm from the tangent line; the round bottom is 76.2 mm."
  },
  {
   "q": "What closes the top?",
   "a": "Any 6 in tri-clamp cap or lid with a 6 in clamp and gasket: a flat cap, a dome lid, or a ported cap for a thermowell, airlock or hose barb."
  }
 ],
 "files_license": {
  "name": "Xem Studio Design License",
  "holder": "Xem Studio",
  "url": "https://xemstudio.com/license/",
  "note": "Xem Studio's own design: free to use, print, modify and sell things made from it; not to be republished or redistributed as files."
 },
 "offers": [
  {
   "file": "vessel-4in-x-12in-dished",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-dished-bottom-vessels/vessel-4in-x-12in-dished.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-dished-bottom-vessels/vessel-4in-x-12in-dished.stl",
   "note": "4 in tri-clamp vessel, 12 in deep (face to the outside of the bottom), F&D dished bottom (crown R = OD, knuckle 6 %) 17.2 high; tube 101.6 × 2.11; holds about 2.14 L in the straight part"
  },
  {
   "file": "vessel-4in-x-12in-round",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-dished-bottom-vessels/vessel-4in-x-12in-round.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-dished-bottom-vessels/vessel-4in-x-12in-round.stl",
   "note": "4 in tri-clamp vessel, 12 in deep (face to the outside of the bottom), round (hemispherical) bottom 50.8 high; tube 101.6 × 2.11; holds about 1.89 L in the straight part"
  },
  {
   "file": "vessel-4in-x-18in-dished",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-dished-bottom-vessels/vessel-4in-x-18in-dished.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-dished-bottom-vessels/vessel-4in-x-18in-dished.stl",
   "note": "4 in tri-clamp vessel, 18 in deep (face to the outside of the bottom), F&D dished bottom (crown R = OD, knuckle 6 %) 17.2 high; tube 101.6 × 2.11; holds about 3.28 L in the straight part"
  },
  {
   "file": "vessel-4in-x-18in-round",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-dished-bottom-vessels/vessel-4in-x-18in-round.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-dished-bottom-vessels/vessel-4in-x-18in-round.stl",
   "note": "4 in tri-clamp vessel, 18 in deep (face to the outside of the bottom), round (hemispherical) bottom 50.8 high; tube 101.6 × 2.11; holds about 3.03 L in the straight part"
  },
  {
   "file": "vessel-4in-x-24in-dished",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-dished-bottom-vessels/vessel-4in-x-24in-dished.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-dished-bottom-vessels/vessel-4in-x-24in-dished.stl",
   "note": "4 in tri-clamp vessel, 24 in deep (face to the outside of the bottom), F&D dished bottom (crown R = OD, knuckle 6 %) 17.2 high; tube 101.6 × 2.11; holds about 4.41 L in the straight part"
  },
  {
   "file": "vessel-4in-x-24in-round",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-dished-bottom-vessels/vessel-4in-x-24in-round.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-dished-bottom-vessels/vessel-4in-x-24in-round.stl",
   "note": "4 in tri-clamp vessel, 24 in deep (face to the outside of the bottom), round (hemispherical) bottom 50.8 high; tube 101.6 × 2.11; holds about 4.16 L in the straight part"
  },
  {
   "file": "vessel-6in-x-12in-dished",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-dished-bottom-vessels/vessel-6in-x-12in-dished.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-dished-bottom-vessels/vessel-6in-x-12in-dished.stl",
   "note": "6 in tri-clamp vessel, 12 in deep (face to the outside of the bottom), F&D dished bottom (crown R = OD, knuckle 6 %) 25.8 high; tube 152.4 × 2.77; holds about 4.73 L in the straight part"
  },
  {
   "file": "vessel-6in-x-12in-round",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-dished-bottom-vessels/vessel-6in-x-12in-round.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-dished-bottom-vessels/vessel-6in-x-12in-round.stl",
   "note": "6 in tri-clamp vessel, 12 in deep (face to the outside of the bottom), round (hemispherical) bottom 76.2 high; tube 152.4 × 2.77; holds about 3.87 L in the straight part"
  },
  {
   "file": "vessel-6in-x-18in-dished",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-dished-bottom-vessels/vessel-6in-x-18in-dished.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-dished-bottom-vessels/vessel-6in-x-18in-dished.stl",
   "note": "6 in tri-clamp vessel, 18 in deep (face to the outside of the bottom), F&D dished bottom (crown R = OD, knuckle 6 %) 25.8 high; tube 152.4 × 2.77; holds about 7.31 L in the straight part"
  },
  {
   "file": "vessel-6in-x-18in-round",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-dished-bottom-vessels/vessel-6in-x-18in-round.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-dished-bottom-vessels/vessel-6in-x-18in-round.stl",
   "note": "6 in tri-clamp vessel, 18 in deep (face to the outside of the bottom), round (hemispherical) bottom 76.2 high; tube 152.4 × 2.77; holds about 6.45 L in the straight part"
  },
  {
   "file": "vessel-6in-x-24in-dished",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-dished-bottom-vessels/vessel-6in-x-24in-dished.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-dished-bottom-vessels/vessel-6in-x-24in-dished.stl",
   "note": "6 in tri-clamp vessel, 24 in deep (face to the outside of the bottom), F&D dished bottom (crown R = OD, knuckle 6 %) 25.8 high; tube 152.4 × 2.77; holds about 9.89 L in the straight part"
  },
  {
   "file": "vessel-6in-x-24in-round",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-dished-bottom-vessels/vessel-6in-x-24in-round.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-dished-bottom-vessels/vessel-6in-x-24in-round.stl",
   "note": "6 in tri-clamp vessel, 24 in deep (face to the outside of the bottom), round (hemispherical) bottom 76.2 high; tube 152.4 × 2.77; holds about 9.04 L in the straight part"
  },
  {
   "file": "vessel-8in-x-12in-dished",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-dished-bottom-vessels/vessel-8in-x-12in-dished.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-dished-bottom-vessels/vessel-8in-x-12in-dished.stl",
   "note": "8 in tri-clamp vessel, 12 in deep (face to the outside of the bottom), F&D dished bottom (crown R = OD, knuckle 6 %) 34.4 high; tube 203.2 × 2.77; holds about 8.30 L in the straight part"
  },
  {
   "file": "vessel-8in-x-12in-round",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-dished-bottom-vessels/vessel-8in-x-12in-round.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-dished-bottom-vessels/vessel-8in-x-12in-round.stl",
   "note": "8 in tri-clamp vessel, 12 in deep (face to the outside of the bottom), round (hemispherical) bottom 101.6 high; tube 203.2 × 2.77; holds about 6.24 L in the straight part"
  },
  {
   "file": "vessel-8in-x-18in-dished",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-dished-bottom-vessels/vessel-8in-x-18in-dished.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-dished-bottom-vessels/vessel-8in-x-18in-dished.stl",
   "note": "8 in tri-clamp vessel, 18 in deep (face to the outside of the bottom), F&D dished bottom (crown R = OD, knuckle 6 %) 34.4 high; tube 203.2 × 2.77; holds about 12.97 L in the straight part"
  },
  {
   "file": "vessel-8in-x-18in-round",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-dished-bottom-vessels/vessel-8in-x-18in-round.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-dished-bottom-vessels/vessel-8in-x-18in-round.stl",
   "note": "8 in tri-clamp vessel, 18 in deep (face to the outside of the bottom), round (hemispherical) bottom 101.6 high; tube 203.2 × 2.77; holds about 10.91 L in the straight part"
  },
  {
   "file": "vessel-8in-x-24in-dished",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-dished-bottom-vessels/vessel-8in-x-24in-dished.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-dished-bottom-vessels/vessel-8in-x-24in-dished.stl",
   "note": "8 in tri-clamp vessel, 24 in deep (face to the outside of the bottom), F&D dished bottom (crown R = OD, knuckle 6 %) 34.4 high; tube 203.2 × 2.77; holds about 17.65 L in the straight part"
  },
  {
   "file": "vessel-8in-x-24in-round",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-dished-bottom-vessels/vessel-8in-x-24in-round.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-dished-bottom-vessels/vessel-8in-x-24in-round.stl",
   "note": "8 in tri-clamp vessel, 24 in deep (face to the outside of the bottom), round (hemispherical) bottom 101.6 high; tube 203.2 × 2.77; holds about 15.59 L in the straight part"
  }
 ],
 "markdown": "https://xemstudio.com/objects/tri-clamp-dished-bottom-vessels/index.md"
}