{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "tri-clamp-gland-caps-2in",
 "name": "Tri-clamp gland caps, 2 in: end caps with a rod gland, an M5 port and a stop bridge or bell-crank post",
 "kind": "hardware",
 "category": "Tri-clamp & pipe",
 "group": "Clamp fittings",
 "year": null,
 "question": "What tri-clamp cap lets a rod out through a gland?",
 "tags": [
  "cap",
  "gland",
  "tri-clamp",
  "ringbom",
  "stirling",
  "long earth society"
 ],
 "aliases": [
  "tri clamp cap rod gland",
  "ringbom stirling cap",
  "end cap with bushing",
  "displacer rod gland tri clamp"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": true,
 "free_files": 2,
 "url": "https://xemstudio.com/objects/tri-clamp-gland-caps-2in/",
 "sheet_txt": "https://xemstudio.com/objects/tri-clamp-gland-caps-2in/sheet.txt",
 "sheet": {
  "basis": "ISO 2852 face (flat, gasket groove) and 20° back cone as the flat end cap on this site; pedestal clear of the 2 in clamp; rod, bushing and port sizes are design values",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "A 2 in end cap with the rod's gland on its back. It closes the top of the run of a standard 2 in equal tee with a Type B gasket and a 2 in clamp, like any end cap; a Ø50.8 pedestal lifts everything on its back clear of the clamp.",
   "Ringbom cap: the Ø8 rod runs in an 8 × 12 × 20 bushing at the top of a Ø36 boss; an 8 mm collar on the rod stops on the boss top and under a bridge 26 mm up, so the free displacer travels 18 mm.",
   "Gamma cap: the Ø3 displacer rod runs in two 3 × 5 × 6 bushings, one at each end of the gland; a post on a Ø64 platform carries the bell crank's pivot 89.5 mm above the face.",
   "Both caps have an M5 tapped port from the pedestal to the cap's face: a plug, a gauge, or a one-way valve that lets air in when the gas falls below air pressure (it keeps the rolling diaphragm the right way round)."
  ],
  "table": {
   "columns": [
    "part",
    "top_mm",
    "rod",
    "gland"
   ],
   "rows": [
    [
     "ringbom",
     30,
     "Ø8",
     "8 × 12 × 20"
    ],
    [
     "gamma",
     22,
     "Ø3",
     "2 × 3 × 5 × 6"
    ]
   ]
  }
 },
 "sheet_text": "Tri-clamp gland caps, 2 in: end caps with a rod gland, an M5 port and a stop bridge or bell-crank post — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/tri-clamp-gland-caps-2in/  (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/)\nBasis: ISO 2852 face (flat, gasket groove) and 20° back cone as the flat end cap on this site; pedestal clear of the 2 in clamp; rod, bushing and port sizes are design values\nCatalog version: 2026-10-20\n\nSizes: see table below\n- A 2 in end cap with the rod's gland on its back. It closes the top of the run of a standard 2 in equal tee with a Type B gasket and a 2 in clamp, like any end cap; a Ø50.8 pedestal lifts everything on its back clear of the clamp.\n- Ringbom cap: the Ø8 rod runs in an 8 × 12 × 20 bushing at the top of a Ø36 boss; an 8 mm collar on the rod stops on the boss top and under a bridge 26 mm up, so the free displacer travels 18 mm.\n- Gamma cap: the Ø3 displacer rod runs in two 3 × 5 × 6 bushings, one at each end of the gland; a post on a Ø64 platform carries the bell crank's pivot 89.5 mm above the face.\n- Both caps have an M5 tapped port from the pedestal to the cap's face: a plug, a gauge, or a one-way valve that lets air in when the gas falls below air pressure (it keeps the rolling diaphragm the right way round).\n\npart  top_mm  rod  gland\nringbom  30.0  Ø8  8 × 12 × 20\ngamma  22.0  Ø3  2 × 3 × 5 × 6\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- ISO (via iTeh sample): ISO 2852 clamp liners: face profile and flange / groove diameters — PDF — standard excerpt; dimensions are facts — https://cdn.standards.iteh.ai/samples/7850/eb49c396488d408c8ced3e2961d76cf3/ISO-2852-1974.pdf\n- ASME: BPE Bioprocessing Equipment (clamp fitting dimensions, tube OD and wall) — standard — ASME; dimensions are facts [verify license at link] — https://www.asme.org/codes-standards/find-codes-standards/bpe-bioprocessing-equipment\n- Long Earth Society: Engine builds — web, video — LES site — https://longearthsociety.com/engineering/\n\nFree files (Xem Studio Design License, Xem Studio; STEP + STL, 2 parts): https://xemstudio.com/files/hardware/tri-clamp-gland-caps-2in/index.json\nAPI: https://xemstudio.com/api/geometry?object=tri-clamp-gland-caps-2in\n",
 "sources": [
  {
   "publisher": "ISO (via iTeh sample)",
   "title": "ISO 2852 clamp liners: face profile and flange / groove diameters",
   "url": "https://cdn.standards.iteh.ai/samples/7850/eb49c396488d408c8ced3e2961d76cf3/ISO-2852-1974.pdf",
   "formats": [
    "PDF"
   ],
   "license": "standard excerpt; dimensions are facts",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "ASME",
   "title": "BPE Bioprocessing Equipment (clamp fitting dimensions, tube OD and wall)",
   "url": "https://www.asme.org/codes-standards/find-codes-standards/bpe-bioprocessing-equipment",
   "formats": [
    "standard"
   ],
   "license": "ASME; dimensions are facts",
   "license_verified": false,
   "hosted": false
  },
  {
   "publisher": "Long Earth Society",
   "title": "Engine builds",
   "url": "https://longearthsociety.com/engineering/",
   "formats": [
    "web",
    "video"
   ],
   "license": "LES site",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "tri-clamp-tee-inserts-2in",
  "sanitary-clamp-tees",
  "tri-clamp-end-cap",
  "tri-clamp-gasket"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "clamp face",
   "exact": "ISO 2852 2 in face, flat with the gasket groove (the flat end cap's)",
   "mates": "Type B gasket on the top of a 2 in tee's run, 2 in clamp",
   "fit": "clamp",
   "files": "all"
  },
  {
   "feature": "pedestal",
   "exact": "Ø50.8 to 10 above the face",
   "mates": "clamp inner Ø52.8 (no contact)",
   "fit": "designed",
   "files": "all"
  },
  {
   "feature": "M5 port",
   "exact": "Ø4.2",
   "mates": "M5 tap drill (plug, gauge or one-way valve)",
   "fit": "designed",
   "files": "all"
  },
  {
   "feature": "bushing seat",
   "exact": "Ø12 × 20",
   "mates": "8 × 12 × 20 sleeve bushing",
   "fit": "press",
   "files": "rd-gland-cap-2in-ringbom"
  },
  {
   "feature": "rod way",
   "exact": "Ø9",
   "mates": "Ø8 Ringbom rod (no contact)",
   "fit": "designed",
   "files": "rd-gland-cap-2in-ringbom"
  },
  {
   "feature": "bridge hole",
   "exact": "Ø10",
   "mates": "Ø8 Ringbom rod (no contact)",
   "fit": "designed",
   "files": "rd-gland-cap-2in-ringbom"
  },
  {
   "feature": "bushing seats",
   "exact": "Ø5 × 6 (two)",
   "mates": "3 × 5 × 6 sleeve bushings",
   "fit": "press",
   "files": "rd-gland-cap-2in-gamma"
  },
  {
   "feature": "rod way",
   "exact": "Ø4",
   "mates": "Ø3 displacer rod (no contact)",
   "fit": "designed",
   "files": "rd-gland-cap-2in-gamma"
  },
  {
   "feature": "pivot hole",
   "exact": "Ø3",
   "mates": "Ø3 × 16 dowel (bell-crank pivot)",
   "fit": "press",
   "files": "rd-gland-cap-2in-gamma"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "What fitting does it go on?",
   "a": "The top of the run of a standard 2 in equal tee, or any 2 in ferrule: it is an end cap with things on its back."
  },
  {
   "q": "What is the M5 port for?",
   "a": "A plug, a pressure gauge, or a one-way valve that lets air in so the gas never drops below air pressure."
  }
 ],
 "files_license": {
  "name": "Xem Studio Design License",
  "holder": "Xem Studio",
  "url": "https://xemstudio.com/license/",
  "note": "Xem Studio's own design: free to use, print, modify and sell things made from it; not to be republished or redistributed as files."
 },
 "offers": [
  {
   "file": "rd-gland-cap-2in-ringbom",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-gland-caps-2in/rd-gland-cap-2in-ringbom.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-gland-caps-2in/rd-gland-cap-2in-ringbom.stl",
   "note": "2 in Ringbom gland cap: flat end cap face (ISO 2852, flat with the gasket groove), Ø50.8 pedestal to 10, Ø36 boss to 30 with an Ø12 × 20 bushing seat at the top, Ø9 rod way, two posts and a bridge 26 above the top (Ø10 hole), M5 port (Ø4.2) at x -21"
  },
  {
   "file": "rd-gland-cap-2in-gamma",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-gland-caps-2in/rd-gland-cap-2in-gamma.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-gland-caps-2in/rd-gland-cap-2in-gamma.stl",
   "note": "2 in gamma gland cap: flat end cap face, Ø50.8 pedestal to 10, Ø64 × 4 platform, Ø16 boss to 22, Ø5 × 6 seats for two 3 × 5 × 6 bushings and an Ø4 rod way between, bell-crank post at x 30 with an Ø3 pivot hole 89.54 above the face, M5 port (Ø4.2) at x -21"
  }
 ],
 "markdown": "https://xemstudio.com/objects/tri-clamp-gland-caps-2in/index.md"
}