{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "tri-clamp-honeycomb-spiral-stacks",
 "name": "Honeycomb and spiral stacks for tri-clamp spools: Ø34.8, Ø47.5 and Ø72.9",
 "kind": "hardware",
 "category": "Tri-clamp & pipe",
 "group": "Inserts & liners",
 "year": null,
 "question": "What honeycomb or spiral stack fits a tri-clamp spool?",
 "tags": [
  "thermoacoustic",
  "stack",
  "honeycomb",
  "resonator",
  "tri-clamp",
  "stirling",
  "long earth society"
 ],
 "aliases": [
  "thermoacoustic engine stack",
  "thermoacoustic stack stl",
  "honeycomb stack",
  "thermoacoustic resonator length",
  "thermoacoustic refrigerator stack"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": true,
 "free_files": 11,
 "url": "https://xemstudio.com/objects/tri-clamp-honeycomb-spiral-stacks/",
 "sheet_txt": "https://xemstudio.com/objects/tri-clamp-honeycomb-spiral-stacks/sheet.txt",
 "sheet": {
  "basis": "Stack OD = 16 ga spool bore (34.8 / 47.5 / 72.9), exact; channel width 2–4 thermal penetration depths (δκ ≈ 0.26 mm in air at 1 bar, 100 Hz; 0.15 mm at 300 Hz), Swift",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "The stack is the core of a standing-wave thermoacoustic engine: many narrow parallel channels between a hot face and a cold face, sitting in the resonator tube. It is drawn at the spool bore, so it is held in the bore itself.",
   "Honeycomb stack (1.5 and 2 in, × 40): hexagonal cells 1.5 mm across flats with 0.4 mm walls, every cell whole inside a 0.4 mm outer ring. Spiral stack (all three sizes, × 30, 40 and 50): one 0.4 mm wall wound with a 1.0 mm gas gap from a Ø6 core to a 0.5 mm outer ring.",
   "Channel size: half-width 2–4 × δκ, δκ = √(κ / (π f ρ cp)), so about 1–1.5 mm channels at 100 Hz and about 1.0 mm at 300 Hz in air at 1 bar.",
   "Placement: centred about λ/8 from the closed (hot) end of a λ/4 resonator; a closed-open tube resonates at f = c / 4L (150 Hz → 572 mm, 300 Hz → 286 mm in air at 20 °C)."
  ],
  "table": {
   "columns": [
    "spool_in",
    "stack_od_mm",
    "forms",
    "lengths_mm",
    "quarter_wave_150hz_mm",
    "half_wave_150hz_mm"
   ],
   "rows": [
    [
     "1.5",
     34.8,
     "honeycomb 1.5 mm cells / spiral 1.0 mm gap",
     "40 / 30, 40, 50",
     572,
     1143
    ],
    [
     "2",
     47.5,
     "honeycomb 1.5 mm cells / spiral 1.0 mm gap",
     "40 / 30, 40, 50",
     572,
     1143
    ],
    [
     "3",
     72.9,
     "spiral 1.0 mm gap",
     "30, 40, 50",
     572,
     1143
    ]
   ]
  }
 },
 "sheet_text": "Honeycomb and spiral stacks for tri-clamp spools: Ø34.8, Ø47.5 and Ø72.9 — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/tri-clamp-honeycomb-spiral-stacks/  (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/)\nBasis: Stack OD = 16 ga spool bore (34.8 / 47.5 / 72.9), exact; channel width 2–4 thermal penetration depths (δκ ≈ 0.26 mm in air at 1 bar, 100 Hz; 0.15 mm at 300 Hz), Swift\nCatalog version: 2026-10-20\n\nSizes: see table below\n- The stack is the core of a standing-wave thermoacoustic engine: many narrow parallel channels between a hot face and a cold face, sitting in the resonator tube. It is drawn at the spool bore, so it is held in the bore itself.\n- Honeycomb stack (1.5 and 2 in, × 40): hexagonal cells 1.5 mm across flats with 0.4 mm walls, every cell whole inside a 0.4 mm outer ring. Spiral stack (all three sizes, × 30, 40 and 50): one 0.4 mm wall wound with a 1.0 mm gas gap from a Ø6 core to a 0.5 mm outer ring.\n- Channel size: half-width 2–4 × δκ, δκ = √(κ / (π f ρ cp)), so about 1–1.5 mm channels at 100 Hz and about 1.0 mm at 300 Hz in air at 1 bar.\n- Placement: centred about λ/8 from the closed (hot) end of a λ/4 resonator; a closed-open tube resonates at f = c / 4L (150 Hz → 572 mm, 300 Hz → 286 mm in air at 20 °C).\n\nspool_in  stack_od_mm  forms  lengths_mm  quarter_wave_150hz_mm  half_wave_150hz_mm\n1.5  34.8  honeycomb 1.5 mm cells / spiral 1.0 mm gap  40 / 30, 40, 50  572  1143\n2  47.5  honeycomb 1.5 mm cells / spiral 1.0 mm gap  40 / 30, 40, 50  572  1143\n3  72.9  spiral 1.0 mm gap  30, 40, 50  572  1143\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- Wikipedia: Thermoacoustic heat engine — web — CC BY-SA 4.0 (text) — https://en.wikipedia.org/wiki/Thermoacoustic_heat_engine\n- G. W. Swift (LANL): Thermoacoustics: A Unifying Perspective for Some Engines and Refrigerators (textbook; DeltaEC software free) — web, software — LANL [verify license at link] — https://www.lanl.gov/org/ddste/aldps/materials-physics-applications/condensed-matter-magnet-science/thermoacoustics/\n- NASA (NTRS, public domain): Thermoacoustic Stirling heat engine for space power — PDF — US Government work, public domain — https://ntrs.nasa.gov/search?q=thermoacoustic%20Stirling\n- Long Earth Society: Engine builds — web, video — LES site — https://longearthsociety.com/engineering/\n\nFree files (Xem Studio Design License, Xem Studio; STEP + STL, 11 parts): https://xemstudio.com/files/hardware/tri-clamp-honeycomb-spiral-stacks/index.json\nAPI: https://xemstudio.com/api/geometry?object=tri-clamp-honeycomb-spiral-stacks\n",
 "sources": [
  {
   "publisher": "Wikipedia",
   "title": "Thermoacoustic heat engine",
   "url": "https://en.wikipedia.org/wiki/Thermoacoustic_heat_engine",
   "formats": [
    "web"
   ],
   "license": "CC BY-SA 4.0 (text)",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "G. W. Swift (LANL)",
   "title": "Thermoacoustics: A Unifying Perspective for Some Engines and Refrigerators (textbook; DeltaEC software free)",
   "url": "https://www.lanl.gov/org/ddste/aldps/materials-physics-applications/condensed-matter-magnet-science/thermoacoustics/",
   "formats": [
    "web",
    "software"
   ],
   "license": "LANL",
   "license_verified": false,
   "hosted": false
  },
  {
   "publisher": "NASA (NTRS, public domain)",
   "title": "Thermoacoustic Stirling heat engine for space power",
   "url": "https://ntrs.nasa.gov/search?q=thermoacoustic%20Stirling",
   "formats": [
    "PDF"
   ],
   "license": "US Government work, public domain",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Long Earth Society",
   "title": "Engine builds",
   "url": "https://longearthsociety.com/engineering/",
   "formats": [
    "web",
    "video"
   ],
   "license": "LES site",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "tri-clamp-parallel-plate-heat-exchangers",
  "tri-clamp-cap-speaker-socket",
  "tri-clamp-spool",
  "sanitary-clamp-spools"
 ],
 "fits": [
  {
   "role": "Goes in or on",
   "items": [
    {
     "slug": "tri-clamp-spool",
     "why": "stack OD = spool bore"
    }
   ]
  },
  {
   "role": "Connects to",
   "items": [
    {
     "slug": "tri-clamp-parallel-plate-heat-exchangers",
     "why": "hot and cold exchangers on the stack faces"
    },
    {
     "slug": "tri-clamp-cap-speaker-socket",
     "why": "speaker cap closes the resonator"
    }
   ]
  },
  {
   "role": "Also needed",
   "items": [
    {
     "slug": "tri-clamp-end-cap",
     "why": "capped hot end"
    },
    {
     "slug": "tri-clamp-clamps",
     "why": "clamp per spool joint"
    }
   ]
  }
 ],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "stack OD",
   "exact": "spool bore (34.8 / 47.5 / 72.9)",
   "mates": "tri-clamp spool bore",
   "fit": "socket",
   "files": "stack-"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "What channel size should a thermoacoustic stack have?",
   "a": "2–4 thermal penetration depths: about 1–1.5 mm in air at 1 bar and 100–300 Hz."
  },
  {
   "q": "How long should a thermoacoustic tube be?",
   "a": "Closed-open (λ/4): L = 343 / (4f): 286 mm for 300 Hz, 429 mm for 200 Hz, 858 mm for 100 Hz; closed-closed is twice that."
  },
  {
   "q": "Where does the stack go?",
   "a": "Centred about λ/8 from the closed hot end: 107 mm in a 429 mm (200 Hz) λ/4 tube."
  },
  {
   "q": "What diameter is the stack for a 2 inch spool?",
   "a": "Ø47.5, the 16 ga bore: a honeycomb stack × 40 or a spiral stack × 30, 40 or 50."
  }
 ],
 "files_license": {
  "name": "Xem Studio Design License",
  "holder": "Xem Studio",
  "url": "https://xemstudio.com/license/",
  "note": "Xem Studio's own design: free to use, print, modify and sell things made from it; not to be republished or redistributed as files."
 },
 "offers": [
  {
   "file": "stack-honeycomb-1.5in-40-c1.5",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-honeycomb-spiral-stacks/stack-honeycomb-1.5in-40-c1.5.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-honeycomb-spiral-stacks/stack-honeycomb-1.5in-40-c1.5.stl",
   "note": "honeycomb stack Ø34.8 × 40 (the 1.5 in spool bore, exact): 1.5 mm hexagonal cells, 0.4 mm walls"
  },
  {
   "file": "stack-spiral-1.5in-30-g1.0",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-honeycomb-spiral-stacks/stack-spiral-1.5in-30-g1.0.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-honeycomb-spiral-stacks/stack-spiral-1.5in-30-g1.0.stl",
   "note": "spiral stack Ø34.8 × 30 (the 1.5 in spool bore, exact): one 0.4 mm wall wound with a 1.0 mm gas gap"
  },
  {
   "file": "stack-spiral-1.5in-40-g1.0",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-honeycomb-spiral-stacks/stack-spiral-1.5in-40-g1.0.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-honeycomb-spiral-stacks/stack-spiral-1.5in-40-g1.0.stl",
   "note": "spiral stack Ø34.8 × 40 (the 1.5 in spool bore, exact): one 0.4 mm wall wound with a 1.0 mm gas gap"
  },
  {
   "file": "stack-spiral-1.5in-50-g1.0",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-honeycomb-spiral-stacks/stack-spiral-1.5in-50-g1.0.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-honeycomb-spiral-stacks/stack-spiral-1.5in-50-g1.0.stl",
   "note": "spiral stack Ø34.8 × 50 (the 1.5 in spool bore, exact): one 0.4 mm wall wound with a 1.0 mm gas gap"
  },
  {
   "file": "stack-honeycomb-2in-40-c1.5",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-honeycomb-spiral-stacks/stack-honeycomb-2in-40-c1.5.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-honeycomb-spiral-stacks/stack-honeycomb-2in-40-c1.5.stl",
   "note": "honeycomb stack Ø47.5 × 40 (the 2 in spool bore, exact): 1.5 mm hexagonal cells, 0.4 mm walls"
  },
  {
   "file": "stack-spiral-2in-30-g1.0",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-honeycomb-spiral-stacks/stack-spiral-2in-30-g1.0.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-honeycomb-spiral-stacks/stack-spiral-2in-30-g1.0.stl",
   "note": "spiral stack Ø47.5 × 30 (the 2 in spool bore, exact): one 0.4 mm wall wound with a 1.0 mm gas gap"
  },
  {
   "file": "stack-spiral-2in-40-g1.0",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-honeycomb-spiral-stacks/stack-spiral-2in-40-g1.0.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-honeycomb-spiral-stacks/stack-spiral-2in-40-g1.0.stl",
   "note": "spiral stack Ø47.5 × 40 (the 2 in spool bore, exact): one 0.4 mm wall wound with a 1.0 mm gas gap"
  },
  {
   "file": "stack-spiral-2in-50-g1.0",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-honeycomb-spiral-stacks/stack-spiral-2in-50-g1.0.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-honeycomb-spiral-stacks/stack-spiral-2in-50-g1.0.stl",
   "note": "spiral stack Ø47.5 × 50 (the 2 in spool bore, exact): one 0.4 mm wall wound with a 1.0 mm gas gap"
  },
  {
   "file": "stack-spiral-3in-30-g1.0",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-honeycomb-spiral-stacks/stack-spiral-3in-30-g1.0.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-honeycomb-spiral-stacks/stack-spiral-3in-30-g1.0.stl",
   "note": "spiral stack Ø72.9 × 30 (the 3 in spool bore, exact): one 0.4 mm wall wound with a 1.0 mm gas gap"
  },
  {
   "file": "stack-spiral-3in-40-g1.0",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-honeycomb-spiral-stacks/stack-spiral-3in-40-g1.0.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-honeycomb-spiral-stacks/stack-spiral-3in-40-g1.0.stl",
   "note": "spiral stack Ø72.9 × 40 (the 3 in spool bore, exact): one 0.4 mm wall wound with a 1.0 mm gas gap"
  },
  {
   "file": "stack-spiral-3in-50-g1.0",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-honeycomb-spiral-stacks/stack-spiral-3in-50-g1.0.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-honeycomb-spiral-stacks/stack-spiral-3in-50-g1.0.stl",
   "note": "spiral stack Ø72.9 × 50 (the 3 in spool bore, exact): one 0.4 mm wall wound with a 1.0 mm gas gap"
  }
 ],
 "markdown": "https://xemstudio.com/objects/tri-clamp-honeycomb-spiral-stacks/index.md"
}