{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "tri-clamp-inner-liner-40-bore",
 "name": "2 in tri-clamp inner liner, Ø40 bore, rim clamped in the joint",
 "kind": "hardware",
 "category": "Tri-clamp & pipe",
 "group": "Inserts & liners",
 "year": null,
 "question": "What liner gives a 2 inch tri-clamp spool a 40 mm inner bore?",
 "tags": [
  "liner",
  "displacer",
  "free piston",
  "regenerator",
  "tri-clamp",
  "stirling",
  "long earth society"
 ],
 "aliases": [
  "displacer liner stirling",
  "free piston displacer cylinder",
  "regenerator inner wall"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": true,
 "free_files": 1,
 "url": "https://xemstudio.com/objects/tri-clamp-inner-liner-40-bore/",
 "sheet_txt": "https://xemstudio.com/objects/tri-clamp-inner-liner-40-bore/sheet.txt",
 "sheet": {
  "basis": "Design values of the free-piston generator: displacer bore Ø40.00 (0.30 radial gap to the Ø39.4 displacer), regenerator annulus Ø41.5–Ø47.5, rim at the ISO 2852 flange diameter",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "It hangs from joint A: its Ø64 × 0.8 rim is clamped between two half gaskets exactly like the flexure leaves, so it is centred by the clamp and sealed by the gaskets; six windows in the rim over r 20.75–23.75 let the gas from the regenerator through to the cooler.",
   "The tube (Ø40 bore, 0.75 wall) is the regenerator's inner wall and the displacer's bore, from 5 mm above the outer bottom (the gas turns under its end) to the joint.",
   "Six 10° spokes 2 thick at 73.05–75.05 mm carry the 389 screen rings and centre the tube in the bore; below them the heater insert slides onto the tube from the bottom (optional).",
   "Fits: bore Ø40 is the displacer's designed 0.30 gap (no contact); spokes and rim OD locate in the Ø47.5 bore and the clamp; the rim is clamped."
  ],
  "table": {
   "columns": [
    "feature",
    "value"
   ],
   "rows": [
    [
     "bore",
     "Ø40.00 (displacer gap 0.30)"
    ],
    [
     "tube OD",
     41.5
    ],
    [
     "rim",
     "Ø64 × 0.8, 6 windows"
    ],
    [
     "spokes",
     "6 × 10°, 2 thick, z 73.05–75.05"
    ],
    [
     "bottom end",
     "z 5 (2 above the floor)"
    ]
   ]
  }
 },
 "sheet_text": "2 in tri-clamp inner liner, Ø40 bore, rim clamped in the joint — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/tri-clamp-inner-liner-40-bore/  (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/)\nBasis: Design values of the free-piston generator: displacer bore Ø40.00 (0.30 radial gap to the Ø39.4 displacer), regenerator annulus Ø41.5–Ø47.5, rim at the ISO 2852 flange diameter\nCatalog version: 2026-10-20\n\nSizes: see table below\n- It hangs from joint A: its Ø64 × 0.8 rim is clamped between two half gaskets exactly like the flexure leaves, so it is centred by the clamp and sealed by the gaskets; six windows in the rim over r 20.75–23.75 let the gas from the regenerator through to the cooler.\n- The tube (Ø40 bore, 0.75 wall) is the regenerator's inner wall and the displacer's bore, from 5 mm above the outer bottom (the gas turns under its end) to the joint.\n- Six 10° spokes 2 thick at 73.05–75.05 mm carry the 389 screen rings and centre the tube in the bore; below them the heater insert slides onto the tube from the bottom (optional).\n- Fits: bore Ø40 is the displacer's designed 0.30 gap (no contact); spokes and rim OD locate in the Ø47.5 bore and the clamp; the rim is clamped.\n\nfeature  value\nbore  Ø40.00 (displacer gap 0.30)\ntube OD  41.5\nrim  Ø64 × 0.8, 6 windows\nspokes  6 × 10°, 2 thick, z 73.05–75.05\nbottom end  z 5 (2 above the floor)\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- Ohio University (Urieli): Stirling cycle machine analysis: ideal adiabatic and simple analysis (after Urieli & Berchowitz, Stirling Cycle Engine Analysis, 1984) — web — author's site — https://www.ohio.edu/mechanical/stirling/\n- Long Earth Society: Engine builds — web, video — LES site — https://longearthsociety.com/engineering/\n\nFree files (Xem Studio Design License, Xem Studio; STEP + STL, 1 parts): https://xemstudio.com/files/hardware/tri-clamp-inner-liner-40-bore/index.json\nAPI: https://xemstudio.com/api/geometry?object=tri-clamp-inner-liner-40-bore\n",
 "sources": [
  {
   "publisher": "Ohio University (Urieli)",
   "title": "Stirling cycle machine analysis: ideal adiabatic and simple analysis (after Urieli & Berchowitz, Stirling Cycle Engine Analysis, 1984)",
   "url": "https://www.ohio.edu/mechanical/stirling/",
   "formats": [
    "web"
   ],
   "license": "author's site",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Long Earth Society",
   "title": "Engine builds",
   "url": "https://longearthsociety.com/engineering/",
   "formats": [
    "web",
    "video"
   ],
   "license": "LES site",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "tri-clamp-closed-end-spool",
  "annular-wire-screen-ring-2in",
  "tri-clamp-slotted-fin-inserts",
  "sealed-hollow-piston-39",
  "tri-clamp-leaf-half-gasket"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "bore",
   "exact": "Ø40.00",
   "mates": "displacer Ø39.4 (0.30 radial gap, no contact)",
   "fit": "designed",
   "files": "all"
  },
  {
   "feature": "rim",
   "exact": "Ø64 × 0.8",
   "mates": "two half gaskets in joint A; centred on the flange rims by the clamp",
   "fit": "clamp",
   "files": "all"
  },
  {
   "feature": "spoke tips",
   "exact": "Ø47.5",
   "mates": "hot spool bore",
   "fit": "slide",
   "files": "all"
  },
  {
   "feature": "tube OD",
   "exact": "Ø41.5",
   "mates": "heater insert bore",
   "fit": "press",
   "files": "all"
  },
  {
   "feature": "tube OD",
   "exact": "Ø41.5",
   "mates": "regenerator ring bores",
   "fit": "slide",
   "files": "all"
  },
  {
   "feature": "bottom end",
   "exact": "2 above the closed end",
   "mates": "gas passage (no contact)",
   "fit": "designed",
   "files": "all"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "Why is the liner clamped in the joint?",
   "a": "The joint centres it on the vessel's axis as accurately as the clamp centres the two spools, and the gaskets seal over it; nothing needs fixing inside the hot end."
  }
 ],
 "files_license": {
  "name": "Xem Studio Design License",
  "holder": "Xem Studio",
  "url": "https://xemstudio.com/license/",
  "note": "Xem Studio's own design: free to use, print, modify and sell things made from it; not to be republished or redistributed as files."
 },
 "offers": [
  {
   "file": "fpse-liner-40-rim64",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-inner-liner-40-bore/fpse-liner-40-rim64.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-inner-liner-40-bore/fpse-liner-40-rim64.stl",
   "note": "displacer liner: tube Ø40 / Ø41.5 from 5 above S1's outer bottom to the rim; six 10° spokes 2 thick under the regenerator (z 73.05–75.05) out to Ø47.5; rim Ø64 × 0.8 clamped in joint A with six windows over the regenerator annulus"
  }
 ],
 "markdown": "https://xemstudio.com/objects/tri-clamp-inner-liner-40-bore/index.md"
}