{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "tri-clamp-leaf-half-gasket",
 "name": "Tri-clamp half gasket for a clamped leaf or rim: 2 in, web 0.6 or 0.45",
 "kind": "hardware",
 "category": "Tri-clamp & pipe",
 "group": "Clamp fittings",
 "year": null,
 "question": "How do I seal a flat plate clamped in a tri-clamp joint?",
 "tags": [
  "gasket",
  "tri-clamp",
  "half gasket",
  "stirling",
  "long earth society"
 ],
 "aliases": [
  "half gasket tri clamp",
  "gasket for plate in tri clamp joint",
  "flexure gasket"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": true,
 "free_files": 2,
 "url": "https://xemstudio.com/objects/tri-clamp-leaf-half-gasket/",
 "sheet_txt": "https://xemstudio.com/objects/tri-clamp-leaf-half-gasket/sheet.txt",
 "sheet": {
  "basis": "ISO 2852 Type B section split at the joint plane: one bulge (R5 1.2, R4 0.4, 1.9 above the web) in one face's 1.6 deep gasket groove with the Type B's 0.3 squeeze, web so that two webs and the plate make the 1.7 joint",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "Two of them sandwich a flat plate (a flexure leaf, the liner's rim) in a 2 in joint: each bulge sits in its ferrule's gasket groove, each web lies on the flat face, the plate between the webs. Web 0.6 for a 0.5 plate, 0.45 for a 0.8 plate: 0.6 + 0.5 + 0.6 = 0.45 + 0.8 + 0.45 = 1.7, the Type B web, so the clamp closes as usual.",
   "Ratings, as facts: the gasket must be rated above the relief setting (15 bar gauge) at its temperature; helium permeates silicone faster than PTFE; PTFE cold-flows under sustained load and heat. Cut or ordered to this drawing."
  ],
  "table": {
   "columns": [
    "web_mm",
    "plate_mm",
    "bulge_above_web_mm",
    "bulge_on_dia_mm",
    "od_mm",
    "id_mm"
   ],
   "rows": [
    [
     0.6,
     0.5,
     1.9,
     56.5,
     63,
     47.5
    ],
    [
     0.45,
     0.8,
     1.9,
     56.5,
     63,
     47.5
    ]
   ]
  }
 },
 "sheet_text": "Tri-clamp half gasket for a clamped leaf or rim: 2 in, web 0.6 or 0.45 — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/tri-clamp-leaf-half-gasket/  (sheet CC BY 4.0)\nBasis: ISO 2852 Type B section split at the joint plane: one bulge (R5 1.2, R4 0.4, 1.9 above the web) in one face's 1.6 deep gasket groove with the Type B's 0.3 squeeze, web so that two webs and the plate make the 1.7 joint\nCatalog version: 2026-10-20\n\nSizes: see table below\n- Two of them sandwich a flat plate (a flexure leaf, the liner's rim) in a 2 in joint: each bulge sits in its ferrule's gasket groove, each web lies on the flat face, the plate between the webs. Web 0.6 for a 0.5 plate, 0.45 for a 0.8 plate: 0.6 + 0.5 + 0.6 = 0.45 + 0.8 + 0.45 = 1.7, the Type B web, so the clamp closes as usual.\n- Ratings, as facts: the gasket must be rated above the relief setting (15 bar gauge) at its temperature; helium permeates silicone faster than PTFE; PTFE cold-flows under sustained load and heat. Cut or ordered to this drawing.\n\nweb_mm  plate_mm  bulge_above_web_mm  bulge_on_dia_mm  od_mm  id_mm\n0.6  0.5  1.9  56.5  63  47.5\n0.45  0.8  1.9  56.5  63  47.5\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- ISO (via iTeh sample): ISO 2852 clamp liners: face profile and flange / groove diameters — PDF — standard excerpt; dimensions are facts — https://cdn.standards.iteh.ai/samples/7850/eb49c396488d408c8ced3e2961d76cf3/ISO-2852-1974.pdf\n- ASME: BPE Bioprocessing Equipment (tube OD and wall, clamp fittings) — standard — ASME; dimensions are facts [verify license at link] — https://www.asme.org/codes-standards/find-codes-standards/bpe-bioprocessing-equipment\n- Long Earth Society: Engine builds — web, video — LES site — https://longearthsociety.com/engineering/\n\nFree files (CC BY 4.0, Xem Studio; STEP + STL, 2 parts): https://xemstudio.com/files/hardware/tri-clamp-leaf-half-gasket/index.json\nAPI: https://xemstudio.com/api/geometry?object=tri-clamp-leaf-half-gasket\n",
 "sources": [
  {
   "publisher": "ISO (via iTeh sample)",
   "title": "ISO 2852 clamp liners: face profile and flange / groove diameters",
   "url": "https://cdn.standards.iteh.ai/samples/7850/eb49c396488d408c8ced3e2961d76cf3/ISO-2852-1974.pdf",
   "formats": [
    "PDF"
   ],
   "license": "standard excerpt; dimensions are facts",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "ASME",
   "title": "BPE Bioprocessing Equipment (tube OD and wall, clamp fittings)",
   "url": "https://www.asme.org/codes-standards/find-codes-standards/bpe-bioprocessing-equipment",
   "formats": [
    "standard"
   ],
   "license": "ASME; dimensions are facts",
   "license_verified": false,
   "hosted": false
  },
  {
   "publisher": "Long Earth Society",
   "title": "Engine builds",
   "url": "https://longearthsociety.com/engineering/",
   "formats": [
    "web",
    "video"
   ],
   "license": "LES site",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "tri-clamp-flexure-leaf",
  "tri-clamp-inner-liner-40-bore"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "bulge",
   "exact": "on Ø56.5, 1.9 above the web (ISO 2852 R5 1.2, R4 0.4)",
   "mates": "ferrule gasket groove 1.6 deep (0.3 squeeze)",
   "fit": "clamp",
   "files": "all"
  },
  {
   "feature": "web",
   "exact": "0.6 / 0.45 thick to Ø63",
   "mates": "ferrule land and the leaf or rim",
   "fit": "clamp",
   "files": "all"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "Why not a Type B gasket each side?",
   "a": "Two full gaskets plus the plate would be 1.7 + 1.7 + plate: too thick for the clamp to close."
  }
 ],
 "files_license": null,
 "offers": [
  {
   "file": "leaf-half-gasket-2in-w0.6",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-leaf-half-gasket/leaf-half-gasket-2in-w0.6.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-leaf-half-gasket/leaf-half-gasket-2in-w0.6.stl",
   "note": "half gasket: web 0.60 thick from Ø47.5 to Ø63, ISO 2852 bulge on Ø56.5 standing 1.9 into one face's gasket groove (1.6 deep + 0.3 squeeze); two per leaf, bulges outward"
  },
  {
   "file": "leaf-half-gasket-2in-w0.45",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-leaf-half-gasket/leaf-half-gasket-2in-w0.45.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-leaf-half-gasket/leaf-half-gasket-2in-w0.45.stl",
   "note": "half gasket: web 0.45 thick from Ø47.5 to Ø63, ISO 2852 bulge on Ø56.5 standing 1.9 into one face's gasket groove (1.6 deep + 0.3 squeeze); two per leaf, bulges outward"
  }
 ],
 "markdown": "https://xemstudio.com/objects/tri-clamp-leaf-half-gasket/index.md"
}