{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "tri-clamp-pg13-5-probe-ports",
 "name": "Tri-clamp caps with PG13.5 probe ports (12 mm pH, dissolved O₂ and CO₂ probes): 1½ to 4 in",
 "kind": "hardware",
 "category": "Tri-clamp & pipe",
 "group": "Clamp fittings",
 "year": null,
 "question": "How do I mount a 12 mm pH probe on a tri-clamp?",
 "tags": [
  "ph probe",
  "pg13.5",
  "probe port",
  "dissolved oxygen",
  "sensor port",
  "sanitary",
  "tri-clamp",
  "clamp fitting",
  "brewing",
  "homebrew"
 ],
 "aliases": [
  "tri clamp ph probe port",
  "pg13.5 tri clamp",
  "12mm ph probe mount",
  "fermenter ph probe port",
  "tri clamp sensor port"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": false,
 "free_files": 5,
 "url": "https://xemstudio.com/objects/tri-clamp-pg13-5-probe-ports/",
 "sheet_txt": "https://xemstudio.com/objects/tri-clamp-pg13-5-probe-ports/sheet.txt",
 "sheet": {
  "basis": "Xem Studio design on the standard solid cap: PG13.5 (DIN 40430: Ø20.4 major, 1.41 pitch, Ø18.6 core) in a Ø30 boss, drawn as the core bore over 12 mm of thread, Ø12.5 through for the 12 mm probe shaft",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "Most process probes (pH, ORP, dissolved oxygen, dissolved CO₂, conductivity) are 12 mm shafts with a PG13.5 thread on the head: they screw straight into this port and seal on their own O-ring.",
   "Probe length sets how deep the tip reaches below the clamp face; pick the probe so its tip sits in the liquid at your lowest fill.",
   "Every clamp face is the ISO 2852 profile used across this site: 2.85 mm rim, flat face with the gasket groove (K 1.6 deep, R3 1.2 bottom, 23° walls, P2 0.8 edges) on C2, 20° back cone. Flange C3 / groove C2 / tube OD × wall, mm: ½–¾ in 25.0 / 20.4 (derived) / 12.7–19.05 × 1.65; 1–1½ in 50.5 / 43.5 / 25.4–38.1 × 1.65; 2 in 64.0 / 56.5 / 50.8 × 1.65; 2½ in 77.5 / 70.5 / 63.5 × 1.65; 3 in 91.0 / 83.5 / 76.2 × 1.65; 4 in 119.0 / 110.0 / 101.6 × 2.11; 6 in 166.9 (6.570 in) / 156.5 / 152.4 × 2.77; 8 in 217.7 (8.570 in) / 207.0 / 203.2 × 2.77; 10 in 268.5 / 261.0 / 254.0 × 3.40; 12 in 319.3 / 311.8 / 304.8 × 3.40."
  ],
  "table": {
   "columns": [
    "clamp",
    "ports",
    "pg_major_mm",
    "core_mm",
    "probe_mm"
   ],
   "rows": [
    [
     "1–1½",
     1,
     20.4,
     18.6,
     12
    ],
    [
     "2",
     1,
     20.4,
     18.6,
     12
    ],
    [
     "3",
     2,
     20.4,
     18.6,
     12
    ],
    [
     "3",
     3,
     20.4,
     18.6,
     12
    ],
    [
     "4",
     3,
     20.4,
     18.6,
     12
    ]
   ]
  }
 },
 "sheet_text": "Tri-clamp caps with PG13.5 probe ports (12 mm pH, dissolved O₂ and CO₂ probes): 1½ to 4 in — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/tri-clamp-pg13-5-probe-ports/  (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/)\nBasis: Xem Studio design on the standard solid cap: PG13.5 (DIN 40430: Ø20.4 major, 1.41 pitch, Ø18.6 core) in a Ø30 boss, drawn as the core bore over 12 mm of thread, Ø12.5 through for the 12 mm probe shaft\nCatalog version: 2026-10-20\n\nSizes: see table below\n- Most process probes (pH, ORP, dissolved oxygen, dissolved CO₂, conductivity) are 12 mm shafts with a PG13.5 thread on the head: they screw straight into this port and seal on their own O-ring.\n- Probe length sets how deep the tip reaches below the clamp face; pick the probe so its tip sits in the liquid at your lowest fill.\n- Every clamp face is the ISO 2852 profile used across this site: 2.85 mm rim, flat face with the gasket groove (K 1.6 deep, R3 1.2 bottom, 23° walls, P2 0.8 edges) on C2, 20° back cone. Flange C3 / groove C2 / tube OD × wall, mm: ½–¾ in 25.0 / 20.4 (derived) / 12.7–19.05 × 1.65; 1–1½ in 50.5 / 43.5 / 25.4–38.1 × 1.65; 2 in 64.0 / 56.5 / 50.8 × 1.65; 2½ in 77.5 / 70.5 / 63.5 × 1.65; 3 in 91.0 / 83.5 / 76.2 × 1.65; 4 in 119.0 / 110.0 / 101.6 × 2.11; 6 in 166.9 (6.570 in) / 156.5 / 152.4 × 2.77; 8 in 217.7 (8.570 in) / 207.0 / 203.2 × 2.77; 10 in 268.5 / 261.0 / 254.0 × 3.40; 12 in 319.3 / 311.8 / 304.8 × 3.40.\n\nclamp  ports  pg_major_mm  core_mm  probe_mm\n1–1½  1  20.4  18.6  12.0\n2  1  20.4  18.6  12.0\n3  2  20.4  18.6  12.0\n3  3  20.4  18.6  12.0\n4  3  20.4  18.6  12.0\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- DIN: DIN 40430 Pg (Panzergewinde) threads: PG13.5 Ø20.4 major, 1.41 pitch (18 tpi), Ø18.6 core; the thread of 12 mm process probes (pH, dissolved O2 / CO2) — standard — DIN; dimensions are facts [verify license at link] — https://www.din.de/en\n- GW Kent: Tri-clamp fittings guide: tube OD, flange OD and ID per size to 12 in; solid cap thickness — web — publisher's guide; dimensions cited — https://www.gwkent.com/triclamp-guide\n- Rubber Fab: Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50) — PDF — maker chart; dimensions are facts [verify license at link] — https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf\n\nFree files (Xem Studio Design License, Xem Studio; STEP + STL, 5 parts): https://xemstudio.com/files/hardware/tri-clamp-pg13-5-probe-ports/index.json\nAPI: https://xemstudio.com/api/geometry?object=tri-clamp-pg13-5-probe-ports\n",
 "sources": [
  {
   "publisher": "DIN",
   "title": "DIN 40430 Pg (Panzergewinde) threads: PG13.5 Ø20.4 major, 1.41 pitch (18 tpi), Ø18.6 core; the thread of 12 mm process probes (pH, dissolved O2 / CO2)",
   "url": "https://www.din.de/en",
   "formats": [
    "standard"
   ],
   "license": "DIN; dimensions are facts",
   "license_verified": false,
   "hosted": false
  },
  {
   "publisher": "GW Kent",
   "title": "Tri-clamp fittings guide: tube OD, flange OD and ID per size to 12 in; solid cap thickness",
   "url": "https://www.gwkent.com/triclamp-guide",
   "formats": [
    "web"
   ],
   "license": "publisher's guide; dimensions cited",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Rubber Fab",
   "title": "Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50)",
   "url": "https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf",
   "formats": [
    "PDF"
   ],
   "license": "maker chart; dimensions are facts",
   "license_verified": false,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "tri-clamp-brewing-sensor-lids",
  "tri-clamp-probe-gland-caps",
  "tri-clamp-thermowells",
  "cable-glands-pg-thread"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [],
 "faq": [
  {
   "q": "Which probes fit?",
   "a": "Any 12 mm probe with a PG13.5 head: most industrial pH, ORP, DO and dissolved-CO₂ probes."
  }
 ],
 "files_license": {
  "name": "Xem Studio Design License",
  "holder": "Xem Studio",
  "url": "https://xemstudio.com/license/",
  "note": "Xem Studio's own design: free to use, print, modify and sell things made from it; not to be republished or redistributed as files."
 },
 "offers": [
  {
   "file": "pg13-5-cap-1.5in-x1",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-pg13-5-probe-ports/pg13-5-cap-1.5in-x1.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-pg13-5-probe-ports/pg13-5-cap-1.5in-x1.stl",
   "note": "1–1½ in cap with 1 × PG13.5 probe port: boss Ø30 × 16, core bore Ø18.6 × 12 (thread), Ø12.5 through"
  },
  {
   "file": "pg13-5-cap-2in-x1",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-pg13-5-probe-ports/pg13-5-cap-2in-x1.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-pg13-5-probe-ports/pg13-5-cap-2in-x1.stl",
   "note": "2 in cap with 1 × PG13.5 probe port: boss Ø30 × 16, core bore Ø18.6 × 12 (thread), Ø12.5 through"
  },
  {
   "file": "pg13-5-cap-3in-x2",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-pg13-5-probe-ports/pg13-5-cap-3in-x2.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-pg13-5-probe-ports/pg13-5-cap-3in-x2.stl",
   "note": "3 in cap with 2 × PG13.5 probe port: boss Ø30 × 16, core bore Ø18.6 × 12 (thread), Ø12.5 through"
  },
  {
   "file": "pg13-5-cap-3in-x3",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-pg13-5-probe-ports/pg13-5-cap-3in-x3.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-pg13-5-probe-ports/pg13-5-cap-3in-x3.stl",
   "note": "3 in cap with 3 × PG13.5 probe port: boss Ø30 × 16, core bore Ø18.6 × 12 (thread), Ø12.5 through"
  },
  {
   "file": "pg13-5-cap-4in-x3",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-pg13-5-probe-ports/pg13-5-cap-4in-x3.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-pg13-5-probe-ports/pg13-5-cap-4in-x3.stl",
   "note": "4 in cap with 3 × PG13.5 probe port: boss Ø30 × 16, core bore Ø18.6 × 12 (thread), Ø12.5 through"
  }
 ],
 "markdown": "https://xemstudio.com/objects/tri-clamp-pg13-5-probe-ports/index.md"
}