{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "tri-clamp-rolling-diaphragm-head-2in",
 "name": "2 in tri-clamp rolling-diaphragm head with cylinder, rod guide and crank tower",
 "kind": "hardware",
 "category": "Tri-clamp & pipe",
 "group": "Caps & heads",
 "year": null,
 "question": "What tri-clamp head holds a rolling diaphragm and its piston?",
 "tags": [
  "power head",
  "rolling diaphragm",
  "crank",
  "cylinder",
  "tri-clamp",
  "stirling",
  "long earth society"
 ],
 "aliases": [
  "rolling diaphragm power cylinder",
  "tri clamp power piston head",
  "stirling power head tri clamp",
  "rolling diaphragm cylinder",
  "rolling diaphragm seat ring"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": true,
 "free_files": 2,
 "url": "https://xemstudio.com/objects/tri-clamp-rolling-diaphragm-head-2in/",
 "sheet_txt": "https://xemstudio.com/objects/tri-clamp-rolling-diaphragm-head-2in/sheet.txt",
 "sheet": {
  "basis": "ISO 2852 face (flat, gasket groove), rim and 20° back cone as the flat end cap on this site; rolling-diaphragm bore, radii and stroke from the published 1.50 in size; 625 and 5 × 8 × 12 bushing sizes from their standards; crank geometry is a design value",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "One part behind a standard 2 in clamp joint. Its clamped end is a standard ISO 2852 2 in face: flat from the 2 in bore out, the gasket groove on Ø56.5, the 2.85 mm rim and the 20° back cone, exactly as an end cap's (inside the 2 in bore it has a 1.6 mm seat pocket for the seat ring), so the standard clamp closes on it and it goes on any 2 in ferrule.",
   "The diaphragm's flange (0.51) takes the place of the gasket. Between the flange and the head sits the seat ring: 1.19 mm between the flange and the head's face and down into the head's seat pocket inside Ø47.5, so flange plus ring are the 1.7 mm of a Type B gasket's web and the clamp closes exactly as it does on a gasket. The ring carries the 1/16 in mouth radius the diaphragm wall rolls off, and its Ø38.10 bore runs on into the head's.",
   "Behind the ring: the Ø38.10 bore the diaphragm rolls in, down to a floor 49 mm from the clamp plane with four Ø6 vents so the back of the diaphragm is at air pressure; a Ø16 boss with an Ø8 seat for two 5 × 8 × 12 sleeve bushings that guide the Ø5 tube piston rod.",
   "A tower on −Y carries two 625 bearings (Ø16 × 5 pockets, 24 apart) on a Ø5 crankshaft 188 mm from the clamp plane: a 20 mm stroke crank disc on the shaft end, a conrod-80 down to the rod yoke. The flywheel goes on the far end.",
   "The same head goes on the 2 in cup of the beta (straight up) and on the branch of a standard 2 in tee in the Ringbom and gamma (sideways)."
  ],
  "table": {
   "columns": [
    "feature",
    "value_mm"
   ],
   "rows": [
    [
     "clamp face",
     "ISO 2852 2 in, face plane 0.85 from the clamp plane"
    ],
    [
     "seat ring on the land",
     1.19
    ],
    [
     "seat ring in the seat pocket",
     2.79
    ],
    [
     "bore Ø",
     38.1
    ],
    [
     "bore depth",
     49
    ],
    [
     "bushing seat",
     "Ø8 × 24"
    ],
    [
     "bearing pockets",
     "Ø16 × 5, y −26 and −50"
    ],
    [
     "shaft axis",
     188
    ],
    [
     "stroke",
     20
    ]
   ]
  }
 },
 "sheet_text": "2 in tri-clamp rolling-diaphragm head with cylinder, rod guide and crank tower — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/tri-clamp-rolling-diaphragm-head-2in/  (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/)\nBasis: ISO 2852 face (flat, gasket groove), rim and 20° back cone as the flat end cap on this site; rolling-diaphragm bore, radii and stroke from the published 1.50 in size; 625 and 5 × 8 × 12 bushing sizes from their standards; crank geometry is a design value\nCatalog version: 2026-10-20\n\nSizes: see table below\n- One part behind a standard 2 in clamp joint. Its clamped end is a standard ISO 2852 2 in face: flat from the 2 in bore out, the gasket groove on Ø56.5, the 2.85 mm rim and the 20° back cone, exactly as an end cap's (inside the 2 in bore it has a 1.6 mm seat pocket for the seat ring), so the standard clamp closes on it and it goes on any 2 in ferrule.\n- The diaphragm's flange (0.51) takes the place of the gasket. Between the flange and the head sits the seat ring: 1.19 mm between the flange and the head's face and down into the head's seat pocket inside Ø47.5, so flange plus ring are the 1.7 mm of a Type B gasket's web and the clamp closes exactly as it does on a gasket. The ring carries the 1/16 in mouth radius the diaphragm wall rolls off, and its Ø38.10 bore runs on into the head's.\n- Behind the ring: the Ø38.10 bore the diaphragm rolls in, down to a floor 49 mm from the clamp plane with four Ø6 vents so the back of the diaphragm is at air pressure; a Ø16 boss with an Ø8 seat for two 5 × 8 × 12 sleeve bushings that guide the Ø5 tube piston rod.\n- A tower on −Y carries two 625 bearings (Ø16 × 5 pockets, 24 apart) on a Ø5 crankshaft 188 mm from the clamp plane: a 20 mm stroke crank disc on the shaft end, a conrod-80 down to the rod yoke. The flywheel goes on the far end.\n- The same head goes on the 2 in cup of the beta (straight up) and on the branch of a standard 2 in tee in the Ringbom and gamma (sideways).\n\nfeature  value_mm\nclamp face  ISO 2852 2 in, face plane 0.85 from the clamp plane\nseat ring on the land  1.19\nseat ring in the seat pocket  2.79\nbore Ø  38.1\nbore depth  49.0\nbushing seat  Ø8 × 24\nbearing pockets  Ø16 × 5, y −26 and −50\nshaft axis  188.0\nstroke  20.0\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- ISO (via iTeh sample): ISO 2852 clamp liners: face profile and flange / groove diameters — PDF — standard excerpt; dimensions are facts — https://cdn.standards.iteh.ai/samples/7850/eb49c396488d408c8ced3e2961d76cf3/ISO-2852-1974.pdf\n- ASME: BPE Bioprocessing Equipment (clamp fitting dimensions, tube OD and wall) — standard — ASME; dimensions are facts [verify license at link] — https://www.asme.org/codes-standards/find-codes-standards/bpe-bioprocessing-equipment\n- Marsh Bellofram: Rolling diaphragm design manual (2022): nomenclature, height formula, standard-size tables, hardware radii — PDF — publisher's manual; dimensions cited, nothing copied — https://damapi.marshbellofram.com/uploads/Bellofram_Diaphragm_Design_Manual_2022_7a922642c3.pdf\n- Long Earth Society: Engine builds — web, video — LES site — https://longearthsociety.com/engineering/\n\nFree files (Xem Studio Design License, Xem Studio; STEP + STL, 2 parts): https://xemstudio.com/files/hardware/tri-clamp-rolling-diaphragm-head-2in/index.json\nAPI: https://xemstudio.com/api/geometry?object=tri-clamp-rolling-diaphragm-head-2in\n",
 "sources": [
  {
   "publisher": "ISO (via iTeh sample)",
   "title": "ISO 2852 clamp liners: face profile and flange / groove diameters",
   "url": "https://cdn.standards.iteh.ai/samples/7850/eb49c396488d408c8ced3e2961d76cf3/ISO-2852-1974.pdf",
   "formats": [
    "PDF"
   ],
   "license": "standard excerpt; dimensions are facts",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "ASME",
   "title": "BPE Bioprocessing Equipment (clamp fitting dimensions, tube OD and wall)",
   "url": "https://www.asme.org/codes-standards/find-codes-standards/bpe-bioprocessing-equipment",
   "formats": [
    "standard"
   ],
   "license": "ASME; dimensions are facts",
   "license_verified": false,
   "hosted": false
  },
  {
   "publisher": "Marsh Bellofram",
   "title": "Rolling diaphragm design manual (2022): nomenclature, height formula, standard-size tables, hardware radii",
   "url": "https://damapi.marshbellofram.com/uploads/Bellofram_Diaphragm_Design_Manual_2022_7a922642c3.pdf",
   "formats": [
    "PDF"
   ],
   "license": "publisher's manual; dimensions cited, nothing copied",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Long Earth Society",
   "title": "Engine builds",
   "url": "https://longearthsociety.com/engineering/",
   "formats": [
    "web",
    "video"
   ],
   "license": "LES site",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "rolling-diaphragm-top-hat",
  "rolling-diaphragm-piston-retainers",
  "rod-end-yokes-side-pin",
  "crank-link-webs",
  "sleeve-bushings"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "clamp face",
   "exact": "ISO 2852 2 in (flat Ø47.5–Ø64.0, gasket groove on Ø56.5 (1.6 deep, R1.2 bottom, 23° walls), rim 2.85, 20° back), face plane 0.85 from the clamp plane",
   "mates": "2 in clamp; seat ring and diaphragm flange in place of a gasket",
   "fit": "clamp",
   "files": "rd-power-head"
  },
  {
   "feature": "seat pocket",
   "exact": "Ø47.5 × 1.6 (inside the 2 in bore)",
   "mates": "seat ring (fills it)",
   "fit": "slide",
   "files": "rd-power-head"
  },
  {
   "feature": "cylinder bore",
   "exact": "Ø38.10 from the seat-pocket floor to 49",
   "mates": "rolling diaphragm outer wall (piston 2.41 clear)",
   "fit": "designed",
   "files": "rd-power-head"
  },
  {
   "feature": "seat ring OD in the pocket",
   "exact": "Ø47.5 × 1.6",
   "mates": "power head seat pocket",
   "fit": "slide",
   "files": "rd-seat-ring"
  },
  {
   "feature": "seat ring on the land",
   "exact": "Ø56.5–Ø63.5 × 1.19",
   "mates": "power head land and the diaphragm flange (flange + ring = 1.7, a Type B web)",
   "fit": "clamp",
   "files": "rd-seat-ring"
  },
  {
   "feature": "seat ring bore",
   "exact": "Ø38.10, 1/16 in mouth radius",
   "mates": "rolling diaphragm wall (rolls off the radius)",
   "fit": "designed",
   "files": "rd-seat-ring"
  },
  {
   "feature": "bushing seat",
   "exact": "Ø8 × 24",
   "mates": "two 5 × 8 × 12 sleeve bushings",
   "fit": "press",
   "files": "all"
  },
  {
   "feature": "bearing pockets",
   "exact": "Ø16 × 5 (two)",
   "mates": "625 bearing",
   "fit": "press",
   "files": "all"
  },
  {
   "feature": "shaft passage",
   "exact": "Ø8",
   "mates": "Ø5 crankshaft (no contact)",
   "fit": "designed",
   "files": "all"
  },
  {
   "feature": "floor vents",
   "exact": "4 × Ø6",
   "mates": "air (back of the diaphragm)",
   "fit": "designed",
   "files": "all"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "Does it fit a standard clamp?",
   "a": "Yes: its clamped end is a standard 2 in face, and flange plus seat ring are as thick as a gasket's web."
  },
  {
   "q": "Where does the gasket go?",
   "a": "There is none at this joint: the diaphragm's flange is the seal, with the seat ring behind it."
  },
  {
   "q": "Why the vents?",
   "a": "So the back of the diaphragm and the piston's skirt stay at air pressure; otherwise the space would act as a spring and pump through the bushings."
  }
 ],
 "files_license": {
  "name": "Xem Studio Design License",
  "holder": "Xem Studio",
  "url": "https://xemstudio.com/license/",
  "note": "Xem Studio's own design: free to use, print, modify and sell things made from it; not to be republished or redistributed as files."
 },
 "offers": [
  {
   "file": "rd-power-head-2in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-rolling-diaphragm-head-2in/rd-power-head-2in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-rolling-diaphragm-head-2in/rd-power-head-2in.stl",
   "note": "2 in rolling-diaphragm power head: standard ISO 2852 2 in clamp face (flat from Ø47.5 to Ø64 with the gasket groove on Ø56.5, rim 2.85, 20° back cone; face plane 0.85 from the clamp plane), a 1.6 seat pocket inside Ø47.5, Ø38.10 bore from the pocket floor to 49, floor 6 with 4 × Ø6 vents, Ø16 boss with an Ø8 × 24 seat for two 5 × 8 × 12 bushings, crank tower with two Ø16 × 5 bearing pockets on the shaft axis 188 above the clamp plane"
  },
  {
   "file": "rd-seat-ring-2in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-rolling-diaphragm-head-2in/rd-seat-ring-2in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-rolling-diaphragm-head-2in/rd-seat-ring-2in.stl",
   "note": "diaphragm seat ring: Ø63.5 × 1.19 between the flange and the head's face, 2.79 thick inside Ø47.5 (fills the head's 1.6 seat pocket), bore Ø38.10 with the 1/16 in mouth radius"
  }
 ],
 "markdown": "https://xemstudio.com/objects/tri-clamp-rolling-diaphragm-head-2in/index.md"
}