{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "tri-clamp-slotted-fin-inserts",
 "name": "Slotted fin inserts for a 2 in tri-clamp bore (heater and cooler sleeves)",
 "kind": "hardware",
 "category": "Tri-clamp & pipe",
 "group": "Inserts & liners",
 "year": null,
 "question": "What fin insert adds heat-transfer area inside a 2 inch tri-clamp bore?",
 "tags": [
  "heat exchanger",
  "fins",
  "insert",
  "heater",
  "cooler",
  "optional",
  "tri-clamp",
  "stirling",
  "long earth society"
 ],
 "aliases": [
  "stirling heater insert",
  "internal fins stirling cooler",
  "slotted heat exchanger sleeve"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": true,
 "free_files": 2,
 "url": "https://xemstudio.com/objects/tri-clamp-slotted-fin-inserts/",
 "sheet_txt": "https://xemstudio.com/objects/tri-clamp-slotted-fin-inserts/sheet.txt",
 "sheet": {
  "basis": "Design values of the free-piston generator: 36 axial slots 1.5 × 2.5 in a sleeve whose OD is the 2 in bore (Ø47.5); heat-transfer and flow numbers from the generator's simple analysis",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "Two slotted sleeves that slide into the plain tri-clamp parts: the heater insert on the liner's lower end inside the closed-end spool, the cooler insert pressed into the 3 in spool under the water jacket. The gas runs along the 36 slots, between fins that touch the wall.",
   "Optional: without them the heater is the plain 3.0 mm annulus round the liner and the cooler the 4.05 mm annulus round the displacer. The engine still runs; my analysis gives 6.6 W instead of 43.2 W at the same stroke (helium, 10 bar), because the gas-side heat transfer falls and the cooler annulus adds dead volume.",
   "Fits: the heater insert slides on the liner (press) and its OD against the hot spool's bore (slide); the cooler insert's OD is pressed into S3, its Ø40 bore is the displacer's 0.30 gap."
  ],
  "table": {
   "columns": [
    "insert",
    "id_mm",
    "od_mm",
    "length_mm",
    "slots",
    "slot_mm"
   ],
   "rows": [
    [
     "heater",
     41.5,
     47.5,
     68.05,
     36,
     "1.5 × 2.5"
    ],
    [
     "cooler",
     40,
     47.5,
     73.2,
     36,
     "1.5 × 2.5"
    ]
   ]
  }
 },
 "sheet_text": "Slotted fin inserts for a 2 in tri-clamp bore (heater and cooler sleeves) — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/tri-clamp-slotted-fin-inserts/  (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/)\nBasis: Design values of the free-piston generator: 36 axial slots 1.5 × 2.5 in a sleeve whose OD is the 2 in bore (Ø47.5); heat-transfer and flow numbers from the generator's simple analysis\nCatalog version: 2026-10-20\n\nSizes: see table below\n- Two slotted sleeves that slide into the plain tri-clamp parts: the heater insert on the liner's lower end inside the closed-end spool, the cooler insert pressed into the 3 in spool under the water jacket. The gas runs along the 36 slots, between fins that touch the wall.\n- Optional: without them the heater is the plain 3.0 mm annulus round the liner and the cooler the 4.05 mm annulus round the displacer. The engine still runs; my analysis gives 6.6 W instead of 43.2 W at the same stroke (helium, 10 bar), because the gas-side heat transfer falls and the cooler annulus adds dead volume.\n- Fits: the heater insert slides on the liner (press) and its OD against the hot spool's bore (slide); the cooler insert's OD is pressed into S3, its Ø40 bore is the displacer's 0.30 gap.\n\ninsert  id_mm  od_mm  length_mm  slots  slot_mm\nheater  41.5  47.5  68.05  36  1.5 × 2.5\ncooler  40.0  47.5  73.2  36  1.5 × 2.5\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- Ohio University (Urieli): Stirling cycle machine analysis: ideal adiabatic and simple analysis (after Urieli & Berchowitz, Stirling Cycle Engine Analysis, 1984) — web — author's site — https://www.ohio.edu/mechanical/stirling/\n- Long Earth Society: Engine builds — web, video — LES site — https://longearthsociety.com/engineering/\n\nFree files (Xem Studio Design License, Xem Studio; STEP + STL, 2 parts): https://xemstudio.com/files/hardware/tri-clamp-slotted-fin-inserts/index.json\nAPI: https://xemstudio.com/api/geometry?object=tri-clamp-slotted-fin-inserts\n",
 "sources": [
  {
   "publisher": "Ohio University (Urieli)",
   "title": "Stirling cycle machine analysis: ideal adiabatic and simple analysis (after Urieli & Berchowitz, Stirling Cycle Engine Analysis, 1984)",
   "url": "https://www.ohio.edu/mechanical/stirling/",
   "formats": [
    "web"
   ],
   "license": "author's site",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Long Earth Society",
   "title": "Engine builds",
   "url": "https://longearthsociety.com/engineering/",
   "formats": [
    "web",
    "video"
   ],
   "license": "LES site",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "tri-clamp-inner-liner-40-bore",
  "tri-clamp-clamp-on-water-jacket",
  "tri-clamp-hot-end-fin-sleeve"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "bore",
   "exact": "Ø41.5",
   "mates": "liner tube OD",
   "fit": "press",
   "files": "fpse-heater-insert"
  },
  {
   "feature": "OD",
   "exact": "Ø47.5",
   "mates": "hot spool bore (hot wall)",
   "fit": "slide",
   "files": "fpse-heater-insert"
  },
  {
   "feature": "OD",
   "exact": "Ø47.5",
   "mates": "S3 spool bore",
   "fit": "press",
   "files": "fpse-cooler-insert"
  },
  {
   "feature": "bore",
   "exact": "Ø40.00",
   "mates": "displacer Ø39.4 (0.30 radial gap, no contact)",
   "fit": "designed",
   "files": "fpse-cooler-insert"
  },
  {
   "feature": "slots",
   "exact": "36 × 1.5 wide × 2.5 deep",
   "mates": "gas passages (no contact)",
   "fit": "designed",
   "files": "all"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "What if I leave them out?",
   "a": "The engine is complete without them; expect about 6.6 W instead of 43.2 W at 10 bar helium."
  }
 ],
 "files_license": {
  "name": "Xem Studio Design License",
  "holder": "Xem Studio",
  "url": "https://xemstudio.com/license/",
  "note": "Xem Studio's own design: free to use, print, modify and sell things made from it; not to be republished or redistributed as files."
 },
 "offers": [
  {
   "file": "fpse-heater-insert-41.5x47.5",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-slotted-fin-inserts/fpse-heater-insert-41.5x47.5.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-slotted-fin-inserts/fpse-heater-insert-41.5x47.5.stl",
   "note": "heater insert (optional): Ø41.5 / Ø47.5 × 68.05, 36 slots 1.5 × 2.5 deep in the OD, full length; on the liner's lower end, OD against the hot wall"
  },
  {
   "file": "fpse-cooler-insert-40x47.5",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-slotted-fin-inserts/fpse-cooler-insert-40x47.5.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-slotted-fin-inserts/fpse-cooler-insert-40x47.5.stl",
   "note": "cooler insert (optional): Ø40 / Ø47.5 × 73.2, 36 slots 1.5 × 2.5 deep in the OD; pressed into the 3 in spool S3, its bore continues the displacer's bore"
  }
 ],
 "markdown": "https://xemstudio.com/objects/tri-clamp-slotted-fin-inserts/index.md"
}