{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "tri-clamp-slotted-hollow-pistons",
 "name": "Slotted hollow pistons for tri-clamp spools: Ø31.8, Ø44.5 and Ø69.9",
 "kind": "hardware",
 "category": "Hardware",
 "group": "Pistons, cylinders & rods",
 "year": null,
 "question": "What slotted hollow piston fits a tri-clamp spool?",
 "tags": [
  "displacer",
  "regenerator",
  "tri-clamp",
  "stirling",
  "beta",
  "annular gap",
  "long earth society"
 ],
 "aliases": [
  "regenerative displacer",
  "annular gap regenerator displacer",
  "tri clamp beta displacer",
  "senft regenerative displacer",
  "displacer with regenerator"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": true,
 "free_files": 6,
 "url": "https://xemstudio.com/objects/tri-clamp-slotted-hollow-pistons/",
 "sheet_txt": "https://xemstudio.com/objects/tri-clamp-slotted-hollow-pistons/sheet.txt",
 "sheet": {
  "basis": "Spool bore minus a 1.5 mm radial gap (Senft annular-gap regenerator); 16 ga ASME BPE bores 34.8 / 47.5 / 72.9 mm",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "An annular-gap regenerative displacer: the 1.5 mm radial gap between it and the spool is the regenerator path, so one spool with this displacer is a complete engine with no separate regenerator section.",
   "Sizes: 1.5 in Ø31.8 × 75, 2 in Ø44.5 × 90, 3 in Ø69.9 × 120 mm. Wall 1.5 mm, closed rounded end, open at the cap end.",
   "Twelve radial slots 1.2 mm wide run through the wall over the middle 70 % of the length (from 15 % to 85 % of L); they are the pockets for the regenerator matrix.",
   "Its cap has a spigot Ø(D − 3) × 3 into the shell, a Ø D × 1.5 flange and a Ø16 × 6 boss with the Ø3 rod hole; 10.5 mm overall."
  ],
  "table": {
   "columns": [
    "spool_in",
    "bore_mm",
    "displacer_od_mm",
    "length_mm",
    "radial_gap_mm",
    "slots"
   ],
   "rows": [
    [
     "1.5",
     34.8,
     31.8,
     75,
     1.5,
     12
    ],
    [
     "2",
     47.5,
     44.5,
     90,
     1.5,
     12
    ],
    [
     "3",
     72.9,
     69.9,
     120,
     1.5,
     12
    ]
   ]
  }
 },
 "sheet_text": "Slotted hollow pistons for tri-clamp spools: Ø31.8, Ø44.5 and Ø69.9 — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/tri-clamp-slotted-hollow-pistons/  (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/)\nBasis: Spool bore minus a 1.5 mm radial gap (Senft annular-gap regenerator); 16 ga ASME BPE bores 34.8 / 47.5 / 72.9 mm\nCatalog version: 2026-10-20\n\nSizes: see table below\n- An annular-gap regenerative displacer: the 1.5 mm radial gap between it and the spool is the regenerator path, so one spool with this displacer is a complete engine with no separate regenerator section.\n- Sizes: 1.5 in Ø31.8 × 75, 2 in Ø44.5 × 90, 3 in Ø69.9 × 120 mm. Wall 1.5 mm, closed rounded end, open at the cap end.\n- Twelve radial slots 1.2 mm wide run through the wall over the middle 70 % of the length (from 15 % to 85 % of L); they are the pockets for the regenerator matrix.\n- Its cap has a spigot Ø(D − 3) × 3 into the shell, a Ø D × 1.5 flange and a Ø16 × 6 boss with the Ø3 rod hole; 10.5 mm overall.\n\nspool_in  bore_mm  displacer_od_mm  length_mm  radial_gap_mm  slots\n1.5  34.8  31.8  75  1.5  12\n2  47.5  44.5  90  1.5  12\n3  72.9  69.9  120  1.5  12\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- Long Earth Society: Tri-clamp Stirling engine builds — web, video — LES site — https://longearthsociety.com/engineering/\n- James R. Senft: An Introduction to Low Temperature Differential Stirling Engines (displacer and gap design) — book — Moriya Press [verify license at link] — https://www.stirlingengine.com/\n- Wikipedia: Stirling engine — web — CC BY-SA 4.0 (text) — https://en.wikipedia.org/wiki/Stirling_engine\n\nFree files (Xem Studio Design License, Xem Studio; STEP + STL, 6 parts): https://xemstudio.com/files/hardware/tri-clamp-slotted-hollow-pistons/index.json\nAPI: https://xemstudio.com/api/geometry?object=tri-clamp-slotted-hollow-pistons\n",
 "sources": [
  {
   "publisher": "Long Earth Society",
   "title": "Tri-clamp Stirling engine builds",
   "url": "https://longearthsociety.com/engineering/",
   "formats": [
    "web",
    "video"
   ],
   "license": "LES site",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "James R. Senft",
   "title": "An Introduction to Low Temperature Differential Stirling Engines (displacer and gap design)",
   "url": "https://www.stirlingengine.com/",
   "formats": [
    "book"
   ],
   "license": "Moriya Press",
   "license_verified": false,
   "hosted": false
  },
  {
   "publisher": "Wikipedia",
   "title": "Stirling engine",
   "url": "https://en.wikipedia.org/wiki/Stirling_engine",
   "formats": [
    "web"
   ],
   "license": "CC BY-SA 4.0 (text)",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "tri-clamp-hollow-pistons",
  "tri-clamp-cap-623-bearing-towers",
  "tri-clamp-spool",
  "wire-mesh-discs-44-32",
  "tri-clamp-full-bore-pistons"
 ],
 "fits": [
  {
   "role": "Goes in or on",
   "items": [
    {
     "slug": "tri-clamp-spool",
     "why": "Ø44.5 in the Ø47.5 bore, 1.5 mm radial gap"
    }
   ]
  },
  {
   "role": "Connects to",
   "items": [
    {
     "slug": "tri-clamp-cap-623-bearing-towers",
     "why": "Ø3 rod through the cold-end head"
    }
   ]
  },
  {
   "role": "Alternatives",
   "items": [
    {
     "slug": "tri-clamp-hollow-pistons",
     "why": "plain displacer with a separate regenerator"
    }
   ]
  },
  {
   "role": "Also needed",
   "items": [
    {
     "slug": "wire-mesh-discs-44-32",
     "why": "matrix in the 12 slots"
    }
   ]
  }
 ],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "displacer OD in the spool bore",
   "exact": "bore − 2 × 0.6 / 0.75 / 1.0",
   "mates": "tri-clamp-spool bore",
   "fit": "designed",
   "files": "displacer-"
  },
  {
   "feature": "regenerative displacer OD in the spool bore",
   "exact": "bore − 2 × 1.5",
   "mates": "tri-clamp-spool bore",
   "fit": "designed",
   "files": "displacer-regenerative-"
  },
  {
   "feature": "regenerative cap spigot in the shell",
   "exact": "shell bore (bore − 6)",
   "mates": "regenerative displacer shell",
   "fit": "slide",
   "files": "displacer-regenerative-cap-"
  },
  {
   "feature": "regenerative cap rod hole",
   "exact": "Ø3",
   "mates": "Ø3 displacer rod",
   "fit": "slide",
   "files": "displacer-regenerative-cap-"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "What is a regenerative displacer?",
   "a": "A displacer whose gap to the cylinder is the regenerator: here a 1.5 mm radial gap with 12 slotted pockets in the wall, so the gas passes the matrix every stroke."
  },
  {
   "q": "What size regenerative displacer for a 2 inch spool?",
   "a": "Ø44.5 × 90 mm in the Ø47.5 bore, 1.5 mm radial gap."
  },
  {
   "q": "How big are the slots?",
   "a": "1.2 mm wide, through the 1.5 mm wall, 12 around, over the middle 70 % of the length: 63 mm on the 2 in displacer."
  }
 ],
 "files_license": {
  "name": "Xem Studio Design License",
  "holder": "Xem Studio",
  "url": "https://xemstudio.com/license/",
  "note": "Xem Studio's own design: free to use, print, modify and sell things made from it; not to be republished or redistributed as files."
 },
 "offers": [
  {
   "file": "displacer-regenerative-1.5in-75",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-slotted-hollow-pistons/displacer-regenerative-1.5in-75.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-slotted-hollow-pistons/displacer-regenerative-1.5in-75.stl",
   "note": "1.5 in annular-gap regenerative displacer Ø31.8 × 75: 12 radial slots for regenerator mesh, 1.5 mm radial gap"
  },
  {
   "file": "displacer-regenerative-cap-1.5in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-slotted-hollow-pistons/displacer-regenerative-cap-1.5in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-slotted-hollow-pistons/displacer-regenerative-cap-1.5in.stl",
   "note": "cap for the 1.5 in regenerative displacer: Ø28.8 × 3 spigot, Ø31.8 × 1.5 flange, Ø16 × 6 boss with the Ø3 rod bore and an M3 grub (Ø2.5 tapped) at 8 mm"
  },
  {
   "file": "displacer-regenerative-2in-90",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-slotted-hollow-pistons/displacer-regenerative-2in-90.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-slotted-hollow-pistons/displacer-regenerative-2in-90.stl",
   "note": "2 in annular-gap regenerative displacer Ø44.5 × 90: 12 radial slots for regenerator mesh, 1.5 mm radial gap"
  },
  {
   "file": "displacer-regenerative-cap-2in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-slotted-hollow-pistons/displacer-regenerative-cap-2in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-slotted-hollow-pistons/displacer-regenerative-cap-2in.stl",
   "note": "cap for the 2 in regenerative displacer: Ø41.5 × 3 spigot, Ø44.5 × 1.5 flange, Ø16 × 6 boss with the Ø3 rod bore and an M3 grub (Ø2.5 tapped) at 8 mm"
  },
  {
   "file": "displacer-regenerative-3in-120",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-slotted-hollow-pistons/displacer-regenerative-3in-120.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-slotted-hollow-pistons/displacer-regenerative-3in-120.stl",
   "note": "3 in annular-gap regenerative displacer Ø69.9 × 120: 12 radial slots for regenerator mesh, 1.5 mm radial gap"
  },
  {
   "file": "displacer-regenerative-cap-3in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-slotted-hollow-pistons/displacer-regenerative-cap-3in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-slotted-hollow-pistons/displacer-regenerative-cap-3in.stl",
   "note": "cap for the 3 in regenerative displacer: Ø66.9 × 3 spigot, Ø69.9 × 1.5 flange, Ø16 × 6 boss with the Ø3 rod bore and an M3 grub (Ø2.5 tapped) at 8 mm"
  }
 ],
 "markdown": "https://xemstudio.com/objects/tri-clamp-slotted-hollow-pistons/index.md"
}