{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "tri-clamp-spool",
 "name": "Tri-clamp spool (two ferrules on a tube), 1.5 and 2 inch",
 "kind": "hardware",
 "category": "Tri-clamp & pipe",
 "group": "Clamp fittings",
 "year": null,
 "question": "What are the face-to-face lengths and volumes of 1.5 and 2 inch tri-clamp spools?",
 "tags": [
  "tri-clamp",
  "sanitary",
  "spool",
  "pipe",
  "stirling",
  "resonator"
 ],
 "aliases": [
  "tri clamp spool",
  "tc spool",
  "sanitary spool",
  "tri clover spool",
  "2 inch spool",
  "resonator section"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": true,
 "free_files": 7,
 "url": "https://xemstudio.com/objects/tri-clamp-spool/",
 "sheet_txt": "https://xemstudio.com/objects/tri-clamp-spool/sheet.txt",
 "sheet": {
  "basis": "ISO 2852 faces on ASME BPE 16 ga tube; catalog lengths",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "Face-to-face length is the spool's stated length. Internal volume sets a thermoacoustic engine's resonance; volumes assume 16 ga tube.",
   "2 in bore: 50.8 − 2×1.65 = 47.5 mm → 17.7 cm³ per cm. 1.5 in: 34.8 mm → 9.5 cm³ per cm.",
   "Stack-up per joint: the faces of a clamped joint sit 1.7 mm apart (the gasket web; ISO 2852 quotes 2.1 compressed). A clamp adds about 10 mm of radial envelope beyond the flange."
  ],
  "table": {
   "columns": [
    "size_in",
    "length_in",
    "length_mm",
    "bore_mm",
    "volume_cm3"
   ],
   "rows": [
    [
     "1.5",
     3,
     76.2,
     34.8,
     72
    ],
    [
     "1.5",
     6,
     152.4,
     34.8,
     145
    ],
    [
     "1.5",
     12,
     304.8,
     34.8,
     290
    ],
    [
     "2",
     3,
     76.2,
     47.5,
     135
    ],
    [
     "2",
     6,
     152.4,
     47.5,
     270
    ],
    [
     "2",
     12,
     304.8,
     47.5,
     540
    ],
    [
     "2",
     18,
     457.2,
     47.5,
     810
    ]
   ]
  }
 },
 "sheet_text": "Tri-clamp spool (two ferrules on a tube), 1.5 and 2 inch — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/tri-clamp-spool/  (sheet CC BY 4.0)\nBasis: ISO 2852 faces on ASME BPE 16 ga tube; catalog lengths\nCatalog version: 2026-10-20\n\nSizes: see table below\n- Face-to-face length is the spool's stated length. Internal volume sets a thermoacoustic engine's resonance; volumes assume 16 ga tube.\n- 2 in bore: 50.8 − 2×1.65 = 47.5 mm → 17.7 cm³ per cm. 1.5 in: 34.8 mm → 9.5 cm³ per cm.\n- Stack-up per joint: the faces of a clamped joint sit 1.7 mm apart (the gasket web; ISO 2852 quotes 2.1 compressed). A clamp adds about 10 mm of radial envelope beyond the flange.\n\nsize_in  length_in  length_mm  bore_mm  volume_cm3\n1.5  3  76.2  34.8  72\n1.5  6  152.4  34.8  145\n1.5  12  304.8  34.8  290\n2  3  76.2  47.5  135\n2  6  152.4  47.5  270\n2  12  304.8  47.5  540\n2  18  457.2  47.5  810\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- L.J. Star: Sanitary clamp gaskets: a good seal compresses the gasket about 0.3 mm — web — maker page [verify license at link] — https://www.ljstar.com/\n- Rubber Fab: Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50) — PDF — maker chart; dimensions are facts [verify license at link] — https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf\n- ISO (via iTeh sample): ISO 2852:1974 clamp liners with gaskets (face and gasket profile, §6.1 and §8) — PDF — standard excerpt; dimensions are facts — https://cdn.standards.iteh.ai/samples/7850/eb49c396488d408c8ced3e2961d76cf3/ISO-2852-1974.pdf\n- McMaster-Carr: Sanitary tube spools (free STEP per part, for your own design use; no redistribution) — STEP, PDF — McMaster-Carr site terms: personal design use, no redistribution [verify license at link] — https://www.mcmaster.com/products/sanitary-fittings/\n- Glacier Tanks: Tri-clamp spools (dimensions on product pages) — web, PDF — vendor catalog [verify license at link] — https://www.glaciertanks.com/tri-clamp-spools\n\nFree files (CC BY 4.0, Xem Studio; STEP + STL, 7 parts): https://xemstudio.com/files/hardware/tri-clamp-spool/index.json\nAPI: https://xemstudio.com/api/geometry?object=tri-clamp-spool\n",
 "sources": [
  {
   "publisher": "L.J. Star",
   "title": "Sanitary clamp gaskets: a good seal compresses the gasket about 0.3 mm",
   "url": "https://www.ljstar.com/",
   "formats": [
    "web"
   ],
   "license": "maker page",
   "license_verified": false,
   "hosted": false
  },
  {
   "publisher": "Rubber Fab",
   "title": "Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50)",
   "url": "https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf",
   "formats": [
    "PDF"
   ],
   "license": "maker chart; dimensions are facts",
   "license_verified": false,
   "hosted": false
  },
  {
   "publisher": "ISO (via iTeh sample)",
   "title": "ISO 2852:1974 clamp liners with gaskets (face and gasket profile, §6.1 and §8)",
   "url": "https://cdn.standards.iteh.ai/samples/7850/eb49c396488d408c8ced3e2961d76cf3/ISO-2852-1974.pdf",
   "formats": [
    "PDF"
   ],
   "license": "standard excerpt; dimensions are facts",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "McMaster-Carr",
   "title": "Sanitary tube spools (free STEP per part, for your own design use; no redistribution)",
   "url": "https://www.mcmaster.com/products/sanitary-fittings/",
   "formats": [
    "STEP",
    "PDF"
   ],
   "license": "McMaster-Carr site terms: personal design use, no redistribution",
   "license_verified": false,
   "hosted": false
  },
  {
   "publisher": "Glacier Tanks",
   "title": "Tri-clamp spools (dimensions on product pages)",
   "url": "https://www.glaciertanks.com/tri-clamp-spools",
   "formats": [
    "web",
    "PDF"
   ],
   "license": "vendor catalog",
   "license_verified": false,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "tri-clamp-ferrule",
  "tri-clamp-end-cap"
 ],
 "fits": [
  {
   "role": "Parts that fit it",
   "items": [
    {
     "slug": "tri-clamp-mesh-cage",
     "why": "cage OD = spool bore Ø47.5 / Ø34.8 (socket)"
    },
    {
     "slug": "tri-clamp-slotted-hollow-pistons",
     "why": "Ø44.5 in the Ø47.5 bore, 1.5 mm radial gap"
    },
    {
     "slug": "tri-clamp-cap-rod-bore-hose-barb",
     "why": "ISO 2852 face on the spool ferrule"
    },
    {
     "slug": "tri-clamp-cap-syringe-socket",
     "why": "ISO 2852 face on the spool or tee ferrule"
    },
    {
     "slug": "tri-clamp-instrument-cap",
     "why": "ISO 2852 face on any ferrule of its size"
    },
    {
     "slug": "tri-clamp-cap-623-bearing-towers",
     "why": "ISO 2852 face on the cold-end ferrule"
    },
    {
     "slug": "tri-clamp-honeycomb-spiral-stacks",
     "why": "stack OD = spool bore"
    },
    {
     "slug": "tri-clamp-cap-speaker-socket",
     "why": "ISO 2852 face on the resonator's open ferrule"
    },
    {
     "slug": "tri-clamp-cap-608-bearing-towers",
     "why": "ISO 2852 face on the open ferrule"
    },
    {
     "slug": "tri-clamp-cap-flexure-seats",
     "why": "ISO 2852 face on the open ferrule"
    },
    {
     "slug": "tri-clamp-cap-gear-shaft-walls-2in",
     "why": "ISO 2852 face on the ferrule with a gasket"
    },
    {
     "slug": "tri-clamp-heat-shield",
     "why": "bore = flange OD, slides over the rim and down the tube"
    }
   ]
  },
  {
   "role": "Connects to",
   "items": [
    {
     "slug": "tri-clamp-clamps",
     "why": "one clamp per ferrule joint"
    },
    {
     "slug": "tri-clamp-end-cap",
     "why": "flat cap and Type B gasket"
    },
    {
     "slug": "tri-clamp-hollow-pistons",
     "why": "heads with rod guide, crank, power or instrument ports"
    }
   ]
  },
  {
   "role": "Alternatives",
   "items": [
    {
     "slug": "tri-clamp-cups",
     "why": "one end closed"
    },
    {
     "slug": "tri-clamp-ferrule",
     "why": "weld your own length"
    }
   ]
  },
  {
   "role": "Also needed",
   "items": [
    {
     "slug": "spool-hanger-collars",
     "why": "clamp it to 2020 for a vertical engine"
    },
    {
     "slug": "tri-clamp-hollow-pistons",
     "why": "displacers sized to its bore"
    },
    {
     "slug": "tri-clamp-full-bore-pistons",
     "why": "full-bore pistons and the clamp-on crank frame"
    }
   ]
  }
 ],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "faces",
   "exact": "ISO 2852",
   "mates": "clamp + Type B gasket",
   "fit": "clamp",
   "files": "all"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "What is the internal volume of a 2 inch tri clamp spool?",
   "a": "About 17.7 cm³ per cm of length with 16 ga tube (47.5 mm bore): a 6 in spool is roughly 270 cm³, a 12 in spool 540 cm³ before the ferrule faces."
  },
  {
   "q": "What is the bore of a 1.5 inch tri clamp spool?",
   "a": "34.8 mm (38.1 mm OD tube, 1.65 mm wall), about 9.5 cm³ per cm."
  },
  {
   "q": "How long is a tri clamp joint stack-up?",
   "a": "Two ferrule faces plus one compressed gasket web, about 2.1 mm per joint (ISO 2852 V). A clamp adds roughly 10 mm of radial envelope beyond the flange."
  }
 ],
 "files_license": null,
 "offers": [
  {
   "file": "tc-spool-1.5in-3in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-spool/tc-spool-1.5in-3in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-spool/tc-spool-1.5in-3in.stl",
   "note": "1.5 in spool, 76.2 mm face to face, 16 ga; ISO 2852 faces"
  },
  {
   "file": "tc-spool-1.5in-6in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-spool/tc-spool-1.5in-6in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-spool/tc-spool-1.5in-6in.stl",
   "note": "1.5 in spool, 152.4 mm face to face, 16 ga; ISO 2852 faces"
  },
  {
   "file": "tc-spool-1.5in-12in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-spool/tc-spool-1.5in-12in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-spool/tc-spool-1.5in-12in.stl",
   "note": "1.5 in spool, 304.8 mm face to face, 16 ga; ISO 2852 faces"
  },
  {
   "file": "tc-spool-2in-3in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-spool/tc-spool-2in-3in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-spool/tc-spool-2in-3in.stl",
   "note": "2 in spool, 76.2 mm face to face, 16 ga; ISO 2852 faces"
  },
  {
   "file": "tc-spool-2in-6in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-spool/tc-spool-2in-6in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-spool/tc-spool-2in-6in.stl",
   "note": "2 in spool, 152.4 mm face to face, 16 ga; ISO 2852 faces"
  },
  {
   "file": "tc-spool-2in-12in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-spool/tc-spool-2in-12in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-spool/tc-spool-2in-12in.stl",
   "note": "2 in spool, 304.8 mm face to face, 16 ga; ISO 2852 faces"
  },
  {
   "file": "tc-spool-2in-18in",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "CC BY 4.0 (Xem Studio)",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-spool/tc-spool-2in-18in.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-spool/tc-spool-2in-18in.stl",
   "note": "2 in spool, 457.2 mm face to face, 16 ga; ISO 2852 faces"
  }
 ],
 "markdown": "https://xemstudio.com/objects/tri-clamp-spool/index.md"
}