{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "tri-clamp-spools-2in-bored-48",
 "name": "2 in tri-clamp spools: 42 mm bored Ø48.00 and 25.4 mm (fabrication spec)",
 "kind": "hardware",
 "category": "Tri-clamp & pipe",
 "group": "Clamp fittings",
 "year": null,
 "question": "What short 2 inch tri-clamp spools can be ordered bored to 48 mm?",
 "tags": [
  "spool",
  "custom length",
  "bored",
  "honed",
  "fabrication",
  "sanitary",
  "linear alternator",
  "tri-clamp",
  "stirling",
  "long earth society"
 ],
 "aliases": [
  "short tri clamp spool",
  "custom length sanitary spool",
  "tri clamp spool bored 48",
  "2 inch spool 25.4 mm",
  "linear alternator module spool"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": true,
 "free_files": 2,
 "url": "https://xemstudio.com/objects/tri-clamp-spools-2in-bored-48/",
 "sheet_txt": "https://xemstudio.com/objects/tri-clamp-spools-2in-bored-48/sheet.txt",
 "sheet": {
  "basis": "Fabrication specs on standard 2 in ferrules (ISO 2852 faces as gen_hardware draws them, BPE tube Ø50.8 × 1.65); lengths set by the module's stroke, the leaves' joints and two high-pressure clamps per spool",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "Two plain custom spools, both full 2 in sanitary fittings with a standard ferrule face at each end. With the catalog's stock 2 in × 3 in spool bored Ø48.00 between them they make the body of my linear alternator module: face A — 42 bored — leaf 1 — 3 in bored — leaf 2 — 25.4 — face B.",
   "42 mm spool, bored: the bore opened from Ø47.5 to Ø48.00 end to end and finished as a running bore (wall 1.40). It is the piston's cylinder: the cup's 24 mm land runs in it as a clearance seal. Spec line: '2 in × 42 mm clamp × clamp spool, tube Ø50.8 × 1.65, bore finished Ø48.00 through'.",
   "25.4 mm spool: two 0.5 in (12.7 mm) short weld ferrules welded back to back, nothing else: room for leaf 2's hub and collar to travel ±6 mm. Spec line: '2 in × 25.4 mm clamp × clamp spool, two short ferrules'.",
   "Both are as short as two high-pressure clamps side by side allow: each clamp needs about 10 mm either side of its joint plane. Hoop stress at the 15 bar gauge relief setting: 27.5 MPa in the 1.40 bored wall, 23.0 MPa in the plain tube; the builder checks that against what the spools are made of."
  ],
  "table": {
   "columns": [
    "spool",
    "face_to_face_mm",
    "bore_mm",
    "wall_mm",
    "faces",
    "made from"
   ],
   "rows": [
    [
     "spool-2in-42mm-bored-48.00",
     42,
     "48.00 (finished)",
     1.4,
     "ISO 2852 2 in, both",
     "two ferrules + tube, bored"
    ],
    [
     "spool-2in-25.4mm",
     25.4,
     "47.5 (as made)",
     1.65,
     "ISO 2852 2 in, both",
     "two 12.7 short weld ferrules"
    ]
   ]
  }
 },
 "sheet_text": "2 in tri-clamp spools: 42 mm bored Ø48.00 and 25.4 mm (fabrication spec) — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/tri-clamp-spools-2in-bored-48/  (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/)\nBasis: Fabrication specs on standard 2 in ferrules (ISO 2852 faces as gen_hardware draws them, BPE tube Ø50.8 × 1.65); lengths set by the module's stroke, the leaves' joints and two high-pressure clamps per spool\nCatalog version: 2026-10-20\n\nSizes: see table below\n- Two plain custom spools, both full 2 in sanitary fittings with a standard ferrule face at each end. With the catalog's stock 2 in × 3 in spool bored Ø48.00 between them they make the body of my linear alternator module: face A — 42 bored — leaf 1 — 3 in bored — leaf 2 — 25.4 — face B.\n- 42 mm spool, bored: the bore opened from Ø47.5 to Ø48.00 end to end and finished as a running bore (wall 1.40). It is the piston's cylinder: the cup's 24 mm land runs in it as a clearance seal. Spec line: '2 in × 42 mm clamp × clamp spool, tube Ø50.8 × 1.65, bore finished Ø48.00 through'.\n- 25.4 mm spool: two 0.5 in (12.7 mm) short weld ferrules welded back to back, nothing else: room for leaf 2's hub and collar to travel ±6 mm. Spec line: '2 in × 25.4 mm clamp × clamp spool, two short ferrules'.\n- Both are as short as two high-pressure clamps side by side allow: each clamp needs about 10 mm either side of its joint plane. Hoop stress at the 15 bar gauge relief setting: 27.5 MPa in the 1.40 bored wall, 23.0 MPa in the plain tube; the builder checks that against what the spools are made of.\n\nspool  face_to_face_mm  bore_mm  wall_mm  faces  made from\nspool-2in-42mm-bored-48.00  42  48.00 (finished)  1.4  ISO 2852 2 in, both  two ferrules + tube, bored\nspool-2in-25.4mm  25.4  47.5 (as made)  1.65  ISO 2852 2 in, both  two 12.7 short weld ferrules\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- ISO (via iTeh sample): ISO 2852 clamp liners: face profile and flange / groove diameters — PDF — standard excerpt; dimensions are facts — https://cdn.standards.iteh.ai/samples/7850/eb49c396488d408c8ced3e2961d76cf3/ISO-2852-1974.pdf\n- ASME: BPE Bioprocessing Equipment (tube OD and wall, clamp fittings) — standard — ASME; dimensions are facts [verify license at link] — https://www.asme.org/codes-standards/find-codes-standards/bpe-bioprocessing-equipment\n- Xem Studio: tools/gen_la_module.py: the module's geometry, masses, bounce volume, natural frequencies and every number on these pages — code — CC BY 4.0 — https://xemstudio.com/\n- Long Earth Society: Engine builds — web, video — LES site — https://longearthsociety.com/engineering/\n\nFree files (Xem Studio Design License, Xem Studio; STEP + STL, 2 parts): https://xemstudio.com/files/hardware/tri-clamp-spools-2in-bored-48/index.json\nAPI: https://xemstudio.com/api/geometry?object=tri-clamp-spools-2in-bored-48\n",
 "sources": [
  {
   "publisher": "ISO (via iTeh sample)",
   "title": "ISO 2852 clamp liners: face profile and flange / groove diameters",
   "url": "https://cdn.standards.iteh.ai/samples/7850/eb49c396488d408c8ced3e2961d76cf3/ISO-2852-1974.pdf",
   "formats": [
    "PDF"
   ],
   "license": "standard excerpt; dimensions are facts",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "ASME",
   "title": "BPE Bioprocessing Equipment (tube OD and wall, clamp fittings)",
   "url": "https://www.asme.org/codes-standards/find-codes-standards/bpe-bioprocessing-equipment",
   "formats": [
    "standard"
   ],
   "license": "ASME; dimensions are facts",
   "license_verified": false,
   "hosted": false
  },
  {
   "publisher": "Xem Studio",
   "title": "tools/gen_la_module.py: the module's geometry, masses, bounce volume, natural frequencies and every number on these pages",
   "url": "https://xemstudio.com/",
   "formats": [
    "code"
   ],
   "license": "CC BY 4.0",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "Long Earth Society",
   "title": "Engine builds",
   "url": "https://longearthsociety.com/engineering/",
   "formats": [
    "web",
    "video"
   ],
   "license": "LES site",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "magnet-carrier-piston-48-tube-rods",
  "tri-clamp-open-flexure-frame-2in",
  "tri-clamp-spool-bored-honed",
  "tri-clamp-custom-length-spools"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "bore",
   "exact": "Ø48.00 × 42",
   "mates": "piston cup land Ø48.00 × 24 (clearance seal)",
   "fit": "run",
   "files": "spool-2in-42mm-bored"
  },
  {
   "feature": "faces",
   "exact": "ISO 2852 2 in, both ends",
   "mates": "face A: Type B gasket + clamp to the engine; other face: half gaskets round leaf 1 (closed module) or Type B gasket + clamp to the open frame base",
   "fit": "clamp",
   "files": "spool-2in-42mm-bored"
  },
  {
   "feature": "faces",
   "exact": "ISO 2852 2 in, both ends",
   "mates": "joint 2: half gaskets round leaf 2; face B: Type B gasket + clamp to the port cap or the next device",
   "fit": "clamp",
   "files": "spool-2in-25.4mm"
  },
  {
   "feature": "bore",
   "exact": "Ø47.5 (as made)",
   "mates": "leaf 2's upper collar and the tube rod's end (no contact)",
   "fit": "designed",
   "files": "spool-2in-25.4mm"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "Can I order these?",
   "a": "Yes: both are standard 2 in ferrules on standard tube; the bored spool then has its bore finished to Ø48.00 end to end, as the other bored spools on this site."
  },
  {
   "q": "Which version uses which?",
   "a": "The 42 mm bored spool is in both versions of the module (closed and open frame); the 25.4 mm spool only in the closed one."
  },
  {
   "q": "Why not a stock 3 in spool at each end?",
   "a": "It would work and add 85 mm of length; on the working side every extra millimetre is dead volume in the engine under test."
  }
 ],
 "files_license": {
  "name": "Xem Studio Design License",
  "holder": "Xem Studio",
  "url": "https://xemstudio.com/license/",
  "note": "Xem Studio's own design: free to use, print, modify and sell things made from it; not to be republished or redistributed as files."
 },
 "offers": [
  {
   "file": "spool-2in-42mm-bored-48.00",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-spools-2in-bored-48/spool-2in-42mm-bored-48.00.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-spools-2in-bored-48/spool-2in-42mm-bored-48.00.stl",
   "note": "2 in × 42 mm spool, ISO 2852 faces both ends, bore finished Ø48.00 end to end (wall 1.40): the module's piston cylinder, face A to the engine"
  },
  {
   "file": "spool-2in-25.4mm",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/tri-clamp-spools-2in-bored-48/spool-2in-25.4mm.step",
   "stl": "https://xemstudio.com/files/hardware/tri-clamp-spools-2in-bored-48/spool-2in-25.4mm.stl",
   "note": "2 in × 25.4 mm spool: two 12.7 mm short weld ferrules back to back, ISO 2852 faces, as-made Ø47.5 bore: the module's face B end"
  }
 ],
 "markdown": "https://xemstudio.com/objects/tri-clamp-spools-2in-bored-48/index.md"
}