{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "walking-beam",
 "name": "Walking beam, arms 158.07 / 131.73",
 "kind": "hardware",
 "category": "Hardware",
 "group": "Gears, cranks & flywheels",
 "year": null,
 "question": "What does a walking beam with unequal arms look like?",
 "tags": [
  "beam",
  "walking beam",
  "linkage",
  "tri-clamp",
  "stirling",
  "long earth society"
 ],
 "aliases": [
  "walking beam stirling",
  "beam engine linkage"
 ],
 "overall_mm": {
  "length": null,
  "width": null,
  "height": null
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": true,
 "free_files": 1,
 "url": "https://xemstudio.com/objects/walking-beam/",
 "sheet_txt": "https://xemstudio.com/objects/walking-beam/sheet.txt",
 "sheet": {
  "basis": "Design values; 625 and dowel sizes from their standards",
  "overall_mm": {
   "length": null,
   "width": null,
   "height": null
  },
  "notes": [
   "A T-shaped beam on two 625 bearings on a Ø5 pivot pin in the post's cheeks. Arm A (158.62) carries a Ø6 pin for the 60 mm link from the piston rod's crosshead; arm B (132.18) a Ø5 pin for the 488.4 mm link down to the crank. The arm ratio 1.2 turns the crank's 30 mm throw into the piston's 36 mm stroke."
  ],
  "table": {
   "columns": [
    "feature",
    "value"
   ],
   "rows": [
    [
     "arm A",
     158.62
    ],
    [
     "arm B",
     132.18
    ],
    [
     "pivot",
     "Ø16 bore, two 625"
    ],
    [
     "swing",
     "±6.5°"
    ]
   ]
  }
 },
 "sheet_text": "Walking beam, arms 158.07 / 131.73 — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/walking-beam/  (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/)\nBasis: Design values; 625 and dowel sizes from their standards\nCatalog version: 2026-10-20\n\nSizes: see table below\n- A T-shaped beam on two 625 bearings on a Ø5 pivot pin in the post's cheeks. Arm A (158.62) carries a Ø6 pin for the 60 mm link from the piston rod's crosshead; arm B (132.18) a Ø5 pin for the 488.4 mm link down to the crank. The arm ratio 1.2 turns the crank's 30 mm throw into the piston's 36 mm stroke.\n\nfeature  value\narm A  158.62\narm B  132.18\npivot  Ø16 bore, two 625\nswing  ±6.5°\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- Long Earth Society: Engine builds — web, video — LES site — https://longearthsociety.com/engineering/\n\nFree files (Xem Studio Design License, Xem Studio; STEP + STL, 1 parts): https://xemstudio.com/files/hardware/walking-beam/index.json\nAPI: https://xemstudio.com/api/geometry?object=walking-beam\n",
 "sources": [
  {
   "publisher": "Long Earth Society",
   "title": "Engine builds",
   "url": "https://longearthsociety.com/engineering/",
   "formats": [
    "web",
    "video"
   ],
   "license": "LES site",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "pivot bore",
   "exact": "Ø16 × 10",
   "mates": "two 625 bearings",
   "fit": "press",
   "files": "all"
  },
  {
   "feature": "end A hole",
   "exact": "Ø6",
   "mates": "Ø6 dowel pin (link A)",
   "fit": "press",
   "files": "all"
  },
  {
   "feature": "end B hole",
   "exact": "Ø5",
   "mates": "Ø5 dowel pin (link B)",
   "fit": "press",
   "files": "all"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "Why a beam?",
   "a": "It is the classic desk layout: the power cylinder stands up from the middle of the displacer cylinder and the beam brings its motion to the same crank as the displacer."
  }
 ],
 "files_license": {
  "name": "Xem Studio Design License",
  "holder": "Xem Studio",
  "url": "https://xemstudio.com/license/",
  "note": "Xem Studio's own design: free to use, print, modify and sell things made from it; not to be republished or redistributed as files."
 },
 "offers": [
  {
   "file": "walking-beam-158.07-131.73",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/hardware/walking-beam/walking-beam-158.07-131.73.step",
   "stl": "https://xemstudio.com/files/hardware/walking-beam/walking-beam-158.07-131.73.stl",
   "note": "walking beam 10 thick: pivot boss Ø30 with an Ø16 bore (two 625), end A Ø6 press hole 158.62 from the pivot, end B Ø5 press hole 132.18 from it, bar 16 high, stem to 40 below the pivot"
  }
 ],
 "markdown": "https://xemstudio.com/objects/walking-beam/index.md"
}