{
 "version": "2026-10-20",
 "license": "Dimension sheets: CC BY 4.0. Standard and published-size files: CC BY 4.0. Xem Studio's own designs (files_license = Xem Studio Design License): free to use and sell things from, not to redistribute as files — https://xemstudio.com/license/. Other publishers' files: their own license, linked beside them.",
 "slug": "wedge-motion-converter",
 "name": "3D printable 45° wedge slider: converts up/down motion to left/right (cam slider, STL, STEP)",
 "kind": "hardware",
 "category": "Mechanisms",
 "group": "Cams",
 "year": null,
 "question": "What mechanism turns a push up and down into a slide left and right?",
 "tags": [
  "wedge cam",
  "cam slider",
  "motion converter",
  "vertical to horizontal",
  "45 degree",
  "diagonal slider",
  "print in place",
  "mechanism",
  "stl",
  "step"
 ],
 "aliases": [
  "vertical to horizontal motion",
  "wedge slider stl",
  "cam slider 3d print",
  "diagonal cut slider",
  "push down move sideways mechanism"
 ],
 "overall_mm": {
  "length": 20,
  "width": 8,
  "height": 60
 },
 "official_cad": false,
 "xem_status": "free-files",
 "les": false,
 "free_files": 2,
 "url": "https://xemstudio.com/objects/wedge-motion-converter/",
 "sheet_txt": "https://xemstudio.com/objects/wedge-motion-converter/sheet.txt",
 "sheet": {
  "basis": "45° wedge / cam slider: follower travel h = s·tan α, so 45° gives 1:1. Xem design, zero clearance.",
  "overall_mm": {
   "length": 20,
   "width": 8,
   "height": 60
  },
  "notes": [
   "Resize: multiply every length by one factor k and the motion stays identical: angles, ratios, timing and the formulas below do not change, because a mechanism's motion depends only on the ratios of its lengths.",
   "Resize: Scale base radius and lift together: the motion law and the pressure angle stay the same. Raising lift alone steepens the pressure angle and the follower can jam.",
   "Resize: fit clearances stay in mm (a slide fit is the same gap at any size); keep every printed wall and pin at least two nozzle widths; mass grows with k³ but part strength only with k², so at k = 2 parts are about 8× heavier and 4× stronger: check pins and thin links when scaling up.",
   "Vertical slider carries 45° ribs, 2 mm deep at 4 mm pitch; horizontal slider carries matching grooves.",
   "Run each bar in its own guide (vertical and horizontal); 1 mm down moves the other bar 1 mm sideways.",
   "Add 0.15–0.2 mm on the rib faces for FDM. Print flat, ribs up."
  ],
  "table": {
   "columns": [
    "file",
    "motion",
    "overall mm"
   ],
   "rows": [
    [
     "wedge-slider-vertical",
     "up / down (input)",
     "20 × 8 × 60"
    ],
    [
     "wedge-slider-horizontal",
     "left / right (output)",
     "60 × 6 × 20"
    ]
   ]
  }
 },
 "sheet_text": "3D printable 45° wedge slider: converts up/down motion to left/right (cam slider, STL, STEP) — dimension sheet\nSource: Xem Studio, https://xemstudio.com/objects/wedge-motion-converter/  (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/)\nBasis: 45° wedge / cam slider: follower travel h = s·tan α, so 45° gives 1:1. Xem design, zero clearance.\nCatalog version: 2026-10-20\n\nOverall (mm): length 20.0, width 8.0, height 60.0\n- Resize: multiply every length by one factor k and the motion stays identical: angles, ratios, timing and the formulas below do not change, because a mechanism's motion depends only on the ratios of its lengths.\n- Resize: Scale base radius and lift together: the motion law and the pressure angle stay the same. Raising lift alone steepens the pressure angle and the follower can jam.\n- Resize: fit clearances stay in mm (a slide fit is the same gap at any size); keep every printed wall and pin at least two nozzle widths; mass grows with k³ but part strength only with k², so at k = 2 parts are about 8× heavier and 4× stronger: check pins and thin links when scaling up.\n- Vertical slider carries 45° ribs, 2 mm deep at 4 mm pitch; horizontal slider carries matching grooves.\n- Run each bar in its own guide (vertical and horizontal); 1 mm down moves the other bar 1 mm sideways.\n- Add 0.15–0.2 mm on the rib faces for FDM. Print flat, ribs up.\n\nfile  motion  overall mm\nwedge-slider-vertical  up / down (input)  20 × 8 × 60\nwedge-slider-horizontal  left / right (output)  60 × 6 × 20\n\nFiles elsewhere (not hosted by Xem Studio; license as stated by the publisher):\n- USPTO: US 5099708 Adjustable rolling cam slider (45° slant faces convert vertical to horizontal action) — web — Publisher's page; dimensions are facts — https://image-ppubs.uspto.gov/dirsearch-public/print/downloadPdf/5099708\n- FIRGELLI: Wedge Cam Mechanism: How It Works, Formula h = s·tan(α) — web — Publisher's page; dimensions are facts — https://www.firgelliauto.com/blogs/mechanisms/wedge-cam\n\nFree files (Xem Studio Design License, Xem Studio; STEP + STL, 2 parts): https://xemstudio.com/files/mechanisms/wedge-motion-converter/index.json\nAPI: https://xemstudio.com/api/geometry?object=wedge-motion-converter\n",
 "sources": [
  {
   "publisher": "USPTO",
   "title": "US 5099708 Adjustable rolling cam slider (45° slant faces convert vertical to horizontal action)",
   "url": "https://image-ppubs.uspto.gov/dirsearch-public/print/downloadPdf/5099708",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  },
  {
   "publisher": "FIRGELLI",
   "title": "Wedge Cam Mechanism: How It Works, Formula h = s·tan(α)",
   "url": "https://www.firgelliauto.com/blogs/mechanisms/wedge-cam",
   "formats": [
    "web"
   ],
   "license": "Publisher's page; dimensions are facts",
   "license_verified": true,
   "hosted": false
  }
 ],
 "xem": {
  "status": "free-files",
  "sheet_free": true,
  "mesh_price_usd": null,
  "step_price_usd": null,
  "tolerance_mm": null
 },
 "related": [
  "print-in-place-dovetail-slider",
  "print-in-place-crank-slider",
  "lewis-side-wedge-5-10x14x50",
  "barrel-cam-mechanism"
 ],
 "fits": [],
 "dimensions": "exact (nominal, no tolerance added)",
 "dimension_rule": "All geometry on Xem Studio is exact (nominal, true size) with no tolerance added. Where a part meets another part, the object lists its mating features (feature, exact size, what it mates with, fit class: press, slide, run, socket, clamp or designed). Apply your process's allowance to those features only; 'designed' gaps are part of the design and stay as drawn. Typical accuracy by process and ISO 286 fits: https://xemstudio.com/tolerances/",
 "mating": [
  {
   "feature": "rib faces",
   "exact": "45°, 2 mm deep, 4 mm pitch, zero clearance",
   "mates": "the other slider",
   "fit": "run",
   "files": "pair"
  }
 ],
 "fit_classes": {
  "press": "stays put: pin, tube, bearing or magnet held by interference. ISO 286 equivalent: H7/p6 (locational interference) or tighter.",
  "slide": "assembles by hand and is held by a grub, pinch or clamp: shaft in a hub, rod in a socket, spigot in a bore. ISO 286 equivalent: H7/g6 or H7/h6.",
  "run": "turns or slides in use: pin in a link, rod through a guide. ISO 286 equivalent: H8/f7 (close running).",
  "socket": "large sliding fit: syringe barrel, sleeve, bobbin in a bore. ISO 286 equivalent: H9/d9 (free running) or looser.",
  "clamp": "split part that closes on the mating part with screws: make it at size.",
  "designed": "a gap that is part of the design (piston fit option, displacer gap, air gap): do not change."
 },
 "faq": [
  {
   "q": "How does a wedge convert vertical motion to horizontal?",
   "a": "The 45° faces slide on each other: each mm down on one bar pushes the other bar one mm sideways (h = s·tan α)."
  },
  {
   "q": "Why ribs instead of one wedge face?",
   "a": "Many short 45° ribs keep the parts compact and spread the load, so the stroke stays in a small block."
  },
  {
   "q": "What clearance do the sliders need?",
   "a": "These are zero clearance; add 0.15–0.2 mm on the rib faces and run each bar in a guide."
  },
  {
   "q": "Can I change the ratio?",
   "a": "A shallower angle gives more force and less travel; 45° gives 1:1."
  }
 ],
 "files_license": {
  "name": "Xem Studio Design License",
  "holder": "Xem Studio",
  "url": "https://xemstudio.com/license/",
  "note": "Xem Studio's own design: free to use, print, modify and sell things made from it; not to be republished or redistributed as files."
 },
 "offers": [
  {
   "file": "wedge-slider-vertical",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/mechanisms/wedge-motion-converter/wedge-slider-vertical.step",
   "stl": "https://xemstudio.com/files/mechanisms/wedge-motion-converter/wedge-slider-vertical.stl",
   "note": "Vertical slider: 20 × 60 mm bar with 45° ribs, 2 mm deep at 4 mm pitch; pushing it down drives the horizontal slider sideways"
  },
  {
   "file": "wedge-slider-horizontal",
   "formats": [
    "step",
    "stl"
   ],
   "price_usd": 0,
   "license": "Xem Studio Design License",
   "step": "https://xemstudio.com/files/mechanisms/wedge-motion-converter/wedge-slider-horizontal.step",
   "stl": "https://xemstudio.com/files/mechanisms/wedge-motion-converter/wedge-slider-horizontal.stl",
   "note": "Horizontal slider: 60 × 20 mm bar with matching 45° grooves, zero clearance; it moves left/right as the vertical slider moves up/down"
  }
 ],
 "markdown": "https://xemstudio.com/objects/wedge-motion-converter/index.md"
}