{
 "object": "handlebar-clamp-rings",
 "license": "Xem Studio Design License (https://xemstudio.com/license/), Xem Studio",
 "files": [
  {
   "name": "clamp-ring-22.2",
   "step": "/files/hardware/handlebar-clamp-rings/clamp-ring-22.2.step",
   "stl": "/files/hardware/handlebar-clamp-rings/clamp-ring-22.2.stl",
   "note": "Split clamp ring for a Ø22.2 bar: bore Ø22.2 (= the bar), wall 4, 16 wide, 2 take-up gap between two 5 ears, Ø4.5 M4 clearance hole on the ear centre 19.85 below the bar axis"
  },
  {
   "name": "clamp-ring-23.8",
   "step": "/files/hardware/handlebar-clamp-rings/clamp-ring-23.8.step",
   "stl": "/files/hardware/handlebar-clamp-rings/clamp-ring-23.8.stl",
   "note": "Split clamp ring for a Ø23.8 bar: bore Ø23.8 (= the bar), wall 4, 16 wide, 2 take-up gap between two 5 ears, Ø4.5 M4 clearance hole on the ear centre 20.65 below the bar axis"
  },
  {
   "name": "clamp-ring-25.4",
   "step": "/files/hardware/handlebar-clamp-rings/clamp-ring-25.4.step",
   "stl": "/files/hardware/handlebar-clamp-rings/clamp-ring-25.4.stl",
   "note": "Split clamp ring for a Ø25.4 bar: bore Ø25.4 (= the bar), wall 4, 16 wide, 2 take-up gap between two 5 ears, Ø4.5 M4 clearance hole on the ear centre 21.45 below the bar axis"
  },
  {
   "name": "clamp-ring-26.0",
   "step": "/files/hardware/handlebar-clamp-rings/clamp-ring-26.0.step",
   "stl": "/files/hardware/handlebar-clamp-rings/clamp-ring-26.0.stl",
   "note": "Split clamp ring for a Ø26.0 bar: bore Ø26.0 (= the bar), wall 4, 16 wide, 2 take-up gap between two 5 ears, Ø4.5 M4 clearance hole on the ear centre 21.75 below the bar axis"
  },
  {
   "name": "clamp-ring-31.8",
   "step": "/files/hardware/handlebar-clamp-rings/clamp-ring-31.8.step",
   "stl": "/files/hardware/handlebar-clamp-rings/clamp-ring-31.8.stl",
   "note": "Split clamp ring for a Ø31.8 bar: bore Ø31.8 (= the bar), wall 4, 16 wide, 2 take-up gap between two 6 ears, Ø5.5 M5 clearance hole on the ear centre 25.15 below the bar axis"
  },
  {
   "name": "clamp-ring-35.0",
   "step": "/files/hardware/handlebar-clamp-rings/clamp-ring-35.0.step",
   "stl": "/files/hardware/handlebar-clamp-rings/clamp-ring-35.0.stl",
   "note": "Split clamp ring for a Ø35.0 bar: bore Ø35.0 (= the bar), wall 4, 16 wide, 2 take-up gap between two 6 ears, Ø5.5 M5 clearance hole on the ear centre 26.75 below the bar axis"
  }
 ]
}
