# 2.5-inch drive (SATA SSD / HDD)

> What are the dimensions and screw positions of a 2.5-inch drive?

- Category: Computers & desk › Storage & NAS
- Kind: Standard part
- Basis: SFF-8201 form factor
- Page: https://xemstudio.com/objects/2-5-inch-drive/ · JSON: https://xemstudio.com/api/geometry?object=2-5-inch-drive · Plain text: https://xemstudio.com/objects/2-5-inch-drive/sheet.txt
- License: dimension sheet CC BY 4.0 (Xem Studio); files CC BY 4.0 or their publisher's license
- Use in every chat: add https://xemstudio.com/mcp as a connector (https://xemstudio.com/use-with-ai/)

## Overall (mm)

| length | width | height |
|---|---|---|
| 100.2 | 69.85 | 7.0 |

Mounting holes: 8 × Ø3.0 mm, pattern bottom 76.60 × 61.72; side 76.60 at 3.00 high (from the connector end: 14.00, 90.60) mm, M3

**Exact dimensions.** Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part.

## Notes

- 100.20 × 69.85 mm (SFF-8201 nominal length; 100.45 max, width ±0.25); 7 mm thick for most SSDs, 9.5 mm for laptop HDDs, 15 mm for some older and enterprise drives (the spec also lists 5, 8.47, 10.5, 12.7, 17 and 19.05).
- Mounting holes, measured from the connector-end face: 2 × M3 on each side at 14.00 and 90.60 mm, 3.00 mm above the bottom face; 4 × M3 on the bottom at 14.00 and 90.60 mm, 4.07 mm in from each long edge (61.72 mm apart). Side screws may go 2.0 mm deep on drives up to 7 mm thick and 3.0 mm on thicker ones; bottom screws 2.5 mm.
- Bottom holes are optional on drives 7 mm thick or less (some SSDs omit them); the side holes are mandatory.
- Files: true-size solid drives (7, 9.5 and 15 mm) with every hole as a plain Ø3.0 cylinder at the thread depth; the SATA connector is not modelled. No printing allowance.

## Mating features (exact size; open press / slide / run / socket by your process clearance, leave designed and clamp as drawn)

| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| side mounting holes | 2 × M3 per side at 14.00 and 90.60 from the connector end, 3.00 above the bottom face; thread depth 2.0 (≤7 mm drives) / 3.0 | M3 screws; mandatory (SFF-8201) | designed | all |
| bottom mounting holes | 4 × M3 at 14.00 and 90.60, 4.07 from each long edge (61.72 apart); depth 2.5 | M3 screws; optional on drives ≤7 mm thick | designed | all |
| drive body | 100.20 × 69.85 (100.45 max, width ±0.25); thickness 7 / 9.5 / 15 | bay or cage; SATA connector on the short edge | slide | all |

## Where the files are

- SNIA SFF: [SFF-8201 Rev 3.4, 2.5" Form Factor Drive Dimensions (Fig 3-1, 3-3)](https://members.snia.org/document/dl/25851) — PDF — SNIA public spec; dimensions are facts
- Seagate: [BarraCuda 2.5 Product Manual 100807728 Rev B, Fig 4–5 mounting dimensions](https://www.seagate.com/files/www-content/product-content/seagate-laptop-fam/barracuda_25/en-us/docs/100807728b.pdf) — PDF — Publisher's page; dimensions are facts

## Free STEP/STL (3 parts, CC BY 4.0, Xem Studio)

Index: https://xemstudio.com/files/hardware/2-5-inch-drive/index.json

- drive-2-5in-7-0mm: [STEP](https://xemstudio.com/files/hardware/2-5-inch-drive/drive-2-5in-7-0mm.step) · [STL](https://xemstudio.com/files/hardware/2-5-inch-drive/drive-2-5in-7-0mm.stl) — 2.5 in drive 7.0 mm thick: 100.2 × 69.85 mm, 4 × M3 bottom + 2 × M3 each side at 14.00 / 90.60 mm from the connector end (bottom holes are optional on drives 7 mm and thinner)
- drive-2-5in-9-5mm: [STEP](https://xemstudio.com/files/hardware/2-5-inch-drive/drive-2-5in-9-5mm.step) · [STL](https://xemstudio.com/files/hardware/2-5-inch-drive/drive-2-5in-9-5mm.stl) — 2.5 in drive 9.5 mm thick: 100.2 × 69.85 mm, 4 × M3 bottom + 2 × M3 each side at 14.00 / 90.60 mm from the connector end
- drive-2-5in-15-0mm: [STEP](https://xemstudio.com/files/hardware/2-5-inch-drive/drive-2-5in-15-0mm.step) · [STL](https://xemstudio.com/files/hardware/2-5-inch-drive/drive-2-5in-15-0mm.stl) — 2.5 in drive 15.0 mm thick: 100.2 × 69.85 mm, 4 × M3 bottom + 2 × M3 each side at 14.00 / 90.60 mm from the connector end

## Questions

**What are 2.5 inch SSD dimensions?**

100 × 69.85 mm, 7 mm thick for most SSDs (9.5 mm laptop HDDs, 15 mm some older drives).

**What are the 2.5 inch drive mounting hole positions?**

Four M3 on the bottom on a 76.6 × 61.72 mm pattern, plus two M3 per side; SATA connector on one short edge.

## Fits with

- [Socket head cap screws, M2–M8 (ISO 4762 / DIN 912)](https://xemstudio.com/objects/socket-head-cap-screws-metric/)
- [Raspberry Pi 5](https://xemstudio.com/objects/raspberry-pi-5/)
