2.5-inch drive (SATA SSD / HDD) — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/2-5-inch-drive/ (sheet CC BY 4.0) Basis: SFF-8201 form factor Catalog version: 2026-10-20 Overall (mm): length 100.2, width 69.85, height 7.0 Mounting holes: 8 × Ø3.0 mm, pattern bottom 76.60 × 61.72; side 76.60 at 3.00 high (from the connector end: 14.00, 90.60), screw M3 - 100.20 × 69.85 mm (SFF-8201 nominal length; 100.45 max, width ±0.25); 7 mm thick for most SSDs, 9.5 mm for laptop HDDs, 15 mm for some older and enterprise drives (the spec also lists 5, 8.47, 10.5, 12.7, 17 and 19.05). - Mounting holes, measured from the connector-end face: 2 × M3 on each side at 14.00 and 90.60 mm, 3.00 mm above the bottom face; 4 × M3 on the bottom at 14.00 and 90.60 mm, 4.07 mm in from each long edge (61.72 mm apart). Side screws may go 2.0 mm deep on drives up to 7 mm thick and 3.0 mm on thicker ones; bottom screws 2.5 mm. - Bottom holes are optional on drives 7 mm thick or less (some SSDs omit them); the side holes are mandatory. - Files: true-size solid drives (7, 9.5 and 15 mm) with every hole as a plain Ø3.0 cylinder at the thread depth; the SATA connector is not modelled. No printing allowance. Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - SNIA SFF: SFF-8201 Rev 3.4, 2.5" Form Factor Drive Dimensions (Fig 3-1, 3-3) — PDF — SNIA public spec; dimensions are facts — https://members.snia.org/document/dl/25851 - Seagate: BarraCuda 2.5 Product Manual 100807728 Rev B, Fig 4–5 mounting dimensions — PDF — Publisher's page; dimensions are facts — https://www.seagate.com/files/www-content/product-content/seagate-laptop-fam/barracuda_25/en-us/docs/100807728b.pdf Free files (CC BY 4.0, Xem Studio; STEP + STL, 3 parts): https://xemstudio.com/files/hardware/2-5-inch-drive/index.json API: https://xemstudio.com/api/geometry?object=2-5-inch-drive