Library › Electronic components › Connectors ·
USB-C / micro-USB breakouts, panel-mount USB, DC jack, magnetic connectors, microSD breakout, Perma-Proto and breadboards
What are the dimensions of a half-size breadboard and the Perma-Proto boards? · Modern device · basis: Adafruit CAD (MIT) models
Also called: half size breadboard dimensions, perma proto dimensions, usb-c breakout dimensions, panel mount usb cutout, magnetic pogo connector, microsd breakout
Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features
- sizes
- 27 in table
Notes
- Half-size breadboard (64): 82.5 × 54.5 × 8.5 mm, 400 tie points; full-size is 165 × 55 mm. Perma-Proto: half 81 × 51 mm with 4 × Ø2.5 holes, full 164 × 51, quarter 43 × 51, Mint tin 54 × 32 mm.
- USB-C breakout (4090): 13 × 10 mm; USB-C plug breakout (5978) 24 × 12; micro-USB breakout (1833) 14 × 12. Panel-mount USB-A cable (937): Ø? body 30 × 20 mm flange with two Ø3.2 holes 24 mm apart. DC jack (610): Ø11.6 panel hole? see sheet.
- Magnetic pogo connectors (5358/5359/5360/5413): 12 × 7 mm, snap to a mating half with 3–5 pins. microSD breakout (4682): 27 × 20 mm.
USB-C / micro-USB breakouts, panel-mount USB, DC jack, magnetic… size chart
| product | bbox l (mm) | bbox w (mm) | bbox h (mm) |
|---|---|---|---|
| 64 Halfsize Breadboard | 85.0 | 55.0 | 9.7 |
| 1609 Perma-Proto HalfSize | 81.3 | 50.8 | 1.6 |
| 1606 Perma-Proto FullSize | 157.5 | 50.8 | 1.6 |
| 1608 perma-proto quarter | 50.8 | 43.2 | 1.6 |
| 1214 PermaProto Small Mint | 53.3 | 33.0 | 1.6 |
| 723 Minty Perma-Proto | 91.4 | 56.9 | 1.6 |
| 4090 USB C Breakout | 20.3 | 14.0 | 4.8 |
| 5978 USB-C Plug Breakout | 24.0 | 14.0 | 3.3 |
| 5993 USB-C Vertical Breakout | 30.5 | 15.2 | 11.3 |
| 1833 microUSB breakout | 20.3 | 10.7 | 4.3 |
| 937 Panel Mount USB Cable | 43.4 | 37.5 | 15.0 |
| 3258 USB Panel Mout Cable | 30.8 | 25.0 | 9.8 |
| 610 DC Jack | 19.0 | 16.2 | 14.0 |
| 5358 Mag Connector (4-pin, Right Angle) | 21.0 | 7.3 | 5.9 |
| 5359 Mag Connector (5-pin, Right Angle) | 20.1 | 6.0 | 5.9 |
| 5360 Mag Connector (3-pin, Right Angle) | 15.0 | 6.0 | 5.9 |
| 5413 Mag Connector (5-pin, Straight) | 20.1 | 5.8 | 4.2 |
| 5412 Mag Connector (USB to 4-pin) | 20.6 | 15.9 | 8.8 |
| 4682 Micro SD Breakout | 25.4 | 22.9 | 3.5 |
| 1870 Coin Cell CR2032 | 27.9 | 23.6 | 5.9 |
| 1867 12mm Coincell Switched | 24.8 | 22.9 | 4.4 |
| 5625 Stemma 5 Port Hub | 25.4 | 17.8 | 5.9 |
| 4471 MCP2221A Breakout | 26.6 | 17.8 | 4.8 |
| 5807 HUSB238 Breakout | 24.6 | 20.3 | 12.1 |
| 5997 CH334F 4-Port Hub | 31.6 | 20.3 | 4.8 |
| 592 microUSB B Connector Cable | 53.9 | 10.8 | 7.9 |
| 4056 USBC-to-microB-cable | 41.5 | 28.5 | 8.5 |
Mating features
Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.
| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| Perma-Proto half-size | 81 × 51 with 4 × Ø2.5 holes | M2.5 screws | designed | 1609-* |
| panel-mount USB-A cable (937) | 30 × 20 flange, two Ø3.2 holes 24 apart | M3 screws, panel cutout for the USB-A body | designed | 937* |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| Adafruit (official) | Adafruit_CAD_Parts: STEP, Fusion 360 and STL for Adafruit products | STEP, F3D, STL | MIT |
Free files
★ Free files 27 parts. Direct links to Adafruit Industries's own repository; nothing rehosted. MIT License (Adafruit_CAD_Parts). index.json
Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.
Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp- Claude: Add to Claude
- ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
- Cursor: install with one click. VS Code: install with one click.
| 64-halfsize-breadboard | Adafruit #64 Halfsize Breadboard; bbox 85.0 × 55.0 × 9.7 mm; 0.0 MB on GitHub | STEP |
| 1609-perma-proto-halfsize | Adafruit #1609 Perma-Proto HalfSize; bbox 81.3 × 50.8 × 1.6 mm; 0.7 MB on GitHub | STEP · STL |
| 1606-perma-proto-fullsize | Adafruit #1606 Perma-Proto FullSize; bbox 157.5 × 50.8 × 1.6 mm; 1.5 MB on GitHub | STEP · STL |
| 1608-perma-proto-quarter | Adafruit #1608 perma-proto quarter; bbox 50.8 × 43.2 × 1.6 mm; 0.0 MB on GitHub | STEP |
| 1214-permaproto-small-mint | Adafruit #1214 PermaProto Small Mint; bbox 53.3 × 33.0 × 1.6 mm; 0.4 MB on GitHub | STEP · STL |
| 723-minty-perma-proto | Adafruit #723 Minty Perma-Proto; bbox 91.4 × 56.9 × 1.6 mm; 0.8 MB on GitHub | STEP |
| 4090-usb-c-breakout | Adafruit #4090 USB C Breakout; bbox 20.3 × 14.0 × 4.8 mm; 0.6 MB on GitHub | STEP · STL |
| 5978-usb-c-plug-breakout | Adafruit #5978 USB-C Plug Breakout; bbox 24.0 × 14.0 × 3.3 mm; 0.2 MB on GitHub | STEP · STL |
| 5993-usb-c-vertical-breakout | Adafruit #5993 USB-C Vertical Breakout; bbox 30.5 × 15.2 × 11.3 mm; 1.9 MB on GitHub | STEP · STL |
| 1833-microusb-breakout | Adafruit #1833 microUSB breakout; bbox 20.3 × 10.7 × 4.3 mm; 0.5 MB on GitHub | STEP · STL |
| 937-panel-mount-usb-cable | Adafruit #937 Panel Mount USB Cable; bbox 43.4 × 37.5 × 15.0 mm; 0.0 MB on GitHub | STEP · STL |
| 3258-usb-panel-mout-cable | Adafruit #3258 USB Panel Mout Cable; bbox 30.8 × 25.0 × 9.8 mm; 0.1 MB on GitHub | STEP · STL |
| 610-dc-jack | Adafruit #610 DC Jack; bbox 19.0 × 16.2 × 14.0 mm; 0.1 MB on GitHub | STEP · STL |
| 5358-mag-connector-4-pin-right-angle | Adafruit #5358 Mag Connector (4-pin, Right Angle); bbox 21.0 × 7.3 × 5.9 mm; 0.1 MB on GitHub | STEP · STL |
| 5359-mag-connector-5-pin-right-angle | Adafruit #5359 Mag Connector (5-pin, Right Angle); bbox 20.1 × 6.0 × 5.9 mm; 0.2 MB on GitHub | STEP · STL |
| 5360-mag-connector-3-pin-right-angle | Adafruit #5360 Mag Connector (3-pin, Right Angle); bbox 15.0 × 6.0 × 5.9 mm; 0.1 MB on GitHub | STEP · STL |
| 5413-mag-connector-5-pin-straight | Adafruit #5413 Mag Connector (5-pin, Straight); bbox 20.1 × 5.8 × 4.2 mm; 0.1 MB on GitHub | STEP · STL |
| 5412-mag-connector-usb-to-4-pin | Adafruit #5412 Mag Connector (USB to 4-pin); bbox 20.6 × 15.9 × 8.8 mm; 0.1 MB on GitHub | STEP · STL |
| 4682-micro-sd-breakout | Adafruit #4682 Micro SD Breakout; bbox 25.4 × 22.9 × 3.5 mm; 1.2 MB on GitHub | STEP · STL |
| 1870-coin-cell-cr2032 | Adafruit #1870 Coin Cell CR2032; bbox 27.9 × 23.6 × 5.9 mm; 0.2 MB on GitHub | STEP · STL |
| 1867-12mm-coincell-switched | Adafruit #1867 12mm Coincell Switched; bbox 24.8 × 22.9 × 4.4 mm; 0.1 MB on GitHub | STEP |
| 5625-stemma-5-port-hub | Adafruit #5625 Stemma 5 Port Hub; bbox 25.4 × 17.8 × 5.9 mm; 0.6 MB on GitHub | STEP · STL |
| 4471-mcp2221a-breakout | Adafruit #4471 MCP2221A Breakout; bbox 26.6 × 17.8 × 4.8 mm; 1.5 MB on GitHub | STEP · STL |
| 5807-husb238-breakout | Adafruit #5807 HUSB238 Breakout; bbox 24.6 × 20.3 × 12.1 mm; 1.4 MB on GitHub | STEP · STL |
| 5997-ch334f-4-port-hub | Adafruit #5997 CH334F 4-Port Hub; bbox 31.6 × 20.3 × 4.8 mm; 1.3 MB on GitHub | STEP |
| 592-microusb-b-connector-cable | Adafruit #592 microUSB B Connector Cable; bbox 53.9 × 10.8 × 7.9 mm; 0.0 MB on GitHub | STEP |
| 4056-usbc-to-microb-cable | Adafruit #4056 USBC-to-microB-cable; bbox 41.5 × 28.5 × 8.5 mm; 0.1 MB on GitHub | STEP · STL |
https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=adafruit-breakouts-cables-proto

Fits with
Questions
What are half-size breadboard dimensions?
82.5 × 54.5 × 8.5 mm (400 points); full-size 165 × 55 mm; mini 46 × 35 mm. The adhesive back is 1 mm.
What is the panel cutout for a panel-mount USB-A cable?
Ø13.5 mm hole for the body (or an 18 × 14 rectangle), two Ø3.2 screw holes 24 mm apart; 30 × 20 mm flange.


