AirPods Pro 2 case — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/airpods-pro-2-case/ (sheet CC BY 4.0) Basis: Apple accessory dimensional drawing (developer.apple.com/accessories); numbers transcribed by Xem Studio Catalog version: 2026-10-20 Overall (mm): length 45.21, width 60.62 - From Apple's dimensional drawing for AIRPODS PRO GEN 2 WIRELESS CASE, USB-C: the numbers below are as printed (Apple's drawing is linked, not copied). No body file: the drawing does not dimension the outline fully enough to build a true shape without guessing. - Apple's notes for accessory makers: Note 1: ACCESSORIES INTRUDING INTO SHADED REGION(S) WILL NEGATIVELY AFFECT PRODUCT PERFORMANCE.; 2 TO ENSURE FULL FUNCTIONALITY, DO NOT OBSTRUCT THIS AREA WITH METAL OR OTHER CONDUCTIVE MATERIAL.; 3 TO ENSURE FULL FUNCTIONALITY WITH MINIMAL IMPACT TO QI CHARGING PERFORMANCE, MINIMIZE ANY MATERIAL THICKNESS.; 4 TO ENABLE CHARGING VIA APPLE WATCH CHARGER, IT IS RECOMMENDED THERE BE NO MATERIAL BETWEEN BACK OF DEVICE AND WATCH CHARGER.; 5 PROTECTIVE CASES OR COVERS MAY DETUNE OR IMPACT RF & WIRELESS CHARGING PERFORMANCE. IMPACT IS HIGHLY DEPENDENT ON MATERIAL AND MATERIAL THICKNESS. HIGHLY RECOMM - AirPods Pro 2 case: 45.2 × 60.6 × 21.7 mm (height × width × depth), 1.78 × 2.39 × 0.85 in, 50.8 g, 0 in display. - AirPods 4 case: 46.2 × 50.1 × 21.2 mm, 32.3 g with buds (the smallest). AirPods (3rd gen) case: 46.4 × 54.4 × 21.4 mm, 37.9 g. - Case holders: hinge is on the top; the lid needs 25 mm of swing clearance; MagSafe-compatible cases centre a Ø18 mm magnet ring on the back. - Compare with the rest of the family on the AirPods Pro 2 / Pro 3, AirPods 4 and AirPods 3 charging cases sheet. parameter value width × length × thickness 60.62 × 45.21 mm overall (as printed) 60.62 PRODUCT LENGTH (front view) overall (as printed) 45.21 PRODUCT HEIGHT (front view) overall (as printed) [1] 60.62 (open lid view) overall (as printed) [1] 60.47 (open, lid seam width) overall (as printed) [1] 19.45 (open case base height) LED (front) [1] LED OUTER DIAMETER = 0.80mm; RECOMMEND Ø2.80; DO NOT OBSTRUCT LED lid 115.00° NOMINAL; 45.01 LID CLEARANCE SCOOP (section A-A); [1] lid-hinge keep-out lanyard loop (side) [1] 3.17 top edge to keep-out, [1] 9.08 keep-out height, [1] 4.47 keep-out width; LANYARD LOOP KEEPOUT [1]; DETAIL B 2X Ø3.44, 4.65 hole pitch; SECTION C-C internal 2.80 x 2.00 button (back) [1] BUTTON OUTER DIAMETER = 6.5mm, AVOID OBSTRUCTING BUTTON, RECOMMEND Ø10.48; BUTTON 16.40 (bottom edge to button centre) hinge keep-out (back) [1] 49.00 VARIES DEPENDING ON ACCESSORY'S MATERIAL THICKNESS; [1] 1.00; [1] RECOMMEND 7.90 VARIES... Apple Watch charger keep-out (back) [4] RECOMMENDED MINIMUM KEEPOUT Ø28.62, MATERIAL IN SPECIFIED AREA MAY DISABLE WATCH CHARGING FEATURE; centre 16.40 above bottom, 30.31 from right edge bottom (port side) [1] 12.45 x [1] 6.60 RECOMMENDED CONNECTOR KEEPOUT; [1] Ø3.45 RECOMMENDED PORT HOLE KEEPOUT; RECOMMENDED SPEAKER HOLE KEEPOUT [1] 3.35 x [1] 7.66; [3] 1.00 RECOMMENDED DISTANCE TO QI WIRELESS CHARGER, wireless charging keep-out (back) [2] 50.62 wide x 35.21 high, 5.00 from top edge RF antenna keep-outs [5] 21.23 high x [5] 15.20 wide at lower corners (front, left, back views) Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - Apple (official): AirPods Pro 2 tech specs — web — Manufacturer spec page — https://support.apple.com/en-us/111851 - Apple (official): AirPods 4 tech specs — web — Manufacturer spec page — https://support.apple.com/en-us/121203 - Apple (official): Accessory Design Guidelines for Apple Devices (dimensioned drawings of every current device) — PDF — Apple developer terms; drawings for accessory design — https://developer.apple.com/accessories/Accessory-Design-Guidelines.pdf - Apple: AIRPODS PRO GEN 2 WIRELESS CASE, USB-C dimensional drawing (Accessory Design Guidelines) — PDF — Apple's terms; linked, not hosted — https://developer.apple.com/download/files/accessories/dimensional-drawings/magsafe-charging-case-usb-c-for-airpods-pro-2nd-generation.pdf No true-size file yet: the published figures do not fix the whole shape; a measured scan is planned. API: https://xemstudio.com/api/geometry?object=airpods-pro-2-case