AirPods Pro 3 case — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/airpods-pro-3-case/ (sheet CC BY 4.0) Basis: Apple accessory dimensional drawing (developer.apple.com/accessories); numbers transcribed by Xem Studio Catalog version: 2026-10-20 Overall (mm): length 47.22, width 62.22, height 21.84 - From Apple's dimensional drawing for MagSafe Charging Case for AirPods Pro 3 (footer; title block TITLE blank): the numbers below are as printed (Apple's drawing is linked, not copied). No body file: the drawing does not dimension the outline fully enough to build a true shape without guessing. - Apple's notes for accessory makers: Note 1: ACCESSORIES INTRUDING INTO SHADED REGION(S) WILL NEGATIVELY AFFECT PRODUCT PERFORMANCE.; 2 TO ENSURE FULL FUNCTIONALITY, DO NOT OBSTRUCT THIS AREA WITH METAL OR OTHER CONDUCTIVE MATERIAL.; 3 TO ENSURE FULL FUNCTIONALITY WITH MINIMAL IMPACT TO QI CHARGING PERFORMANCE, MINIMIZE ANY MATERIAL THICKNESS.; 4 TO ENABLE CHARGING VIA APPLE WATCH CHARGER, IT IS RECOMMENDED THERE BE NO MATERIAL BETWEEN BACK OF DEVICE AND WATCH CHARGER.; 5 PROTECTIVE CASES OR COVERS MAY DETUNE OR IMPACT RF & WIRELESS CHARGING PERFORMANCE. IMPACT IS HIGHLY DEPENDENT ON MATERIAL AND MATERIAL THICKNESS. HIGHLY RECOMM - AirPods Pro 3 case: 45.2 × 60.6 × 21.7 mm (height × width × depth), 1.78 × 2.39 × 0.85 in, 50.8 g, 0 in display. - AirPods 4 case: 46.2 × 50.1 × 21.2 mm, 32.3 g with buds (the smallest). AirPods (3rd gen) case: 46.4 × 54.4 × 21.4 mm, 37.9 g. - Case holders: hinge is on the top; the lid needs 25 mm of swing clearance; MagSafe-compatible cases centre a Ø18 mm magnet ring on the back. - Compare with the rest of the family on the AirPods Pro 2 / Pro 3, AirPods 4 and AirPods 3 charging cases sheet. parameter value width × length × thickness 62.22 × 47.22 × 21.84 mm overall (as printed) 62.22 PRODUCT LENGTH overall (as printed) 47.22 PRODUCT HEIGHT overall (as printed) 21.84 PRODUCT THICKNESS overall (as printed) [1] 62.22 (open view) overall (as printed) [1] 62.07 (open, lid seam width) overall (as printed) [1] 19.64 (open case base height) LED (front) [1] LED OUTER DIAMETER = Ø0.80, Ø2.80 RECOMMENDED MINIMUM KEEPOUT, DO NOT OBSTRUCT LED; 26.31 bottom edge to LED centre; 31.11 left edge to LED centre lid 115.00° NOMINAL; 47.10 LID CLEARANCE SCOOP (section A-A); [1] hinge keep-out lanyard loop (side) [1] 4.16 top edge to keep-out, [1] 9.08 keep-out height, [1] 4.47 keep-out width; DETAIL B 2X Ø3.47, 4.67 pitch; SECTION C-C LANYARD LOOP INTERNAL DIMENSIONS 2.80 x 2.00 hinge keep-out (back) [1] 49.70 RECOMMENDED MINIMUM KEEPOUT VARIES DEPENDING ON ACCESSORY'S MATERIAL THICKNESS; [1] 1.00; [1] 7.90 RECOMMENDED MINIMUM KEEPOUT VARIES... Apple Watch charger keep-out (back) [4] Ø28.62 RECOMMENDED MINIMUM KEEPOUT, MATERIAL IN SPECIFIED AREA MAY DISABLE WATCH CHARGING FEATURE; centre 16.76 above bottom, 31.11 from right edge bottom (port side) [1] 12.46 RECOMMENDED MINIMUM KEEPOUT x [1] 6.60; [1] Ø3.45 RECOMMENDED PORT HOLE KEEPOUT; [1] 7.66 x [1] 3.35 RECOMMENDED SPEAKER HOLE CUTOUT; [3] 1.00 RECOMMENDED DISTANCE TO QI WIRELESS CHARGER, SH wireless charging keep-out (back) [2] 52.22 wide x 37.22 high, 5.00 from top edge, 5.00 from right edge RF antenna keep-outs [5] 21.23 high x [5] 15.20 wide at lower corners button none shown on back view Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - Apple (official): AirPods Pro 2 tech specs — web — Manufacturer spec page — https://support.apple.com/en-us/111851 - Apple (official): AirPods 4 tech specs — web — Manufacturer spec page — https://support.apple.com/en-us/121203 - Apple (official): Accessory Design Guidelines for Apple Devices (dimensioned drawings of every current device) — PDF — Apple developer terms; drawings for accessory design — https://developer.apple.com/accessories/Accessory-Design-Guidelines.pdf - Apple: MagSafe Charging Case for AirPods Pro 3 (footer; title block TITLE blank) dimensional drawing (Accessory Design Guidelines) — PDF — Apple's terms; linked, not hosted — https://developer.apple.com/download/files/accessories/dimensional-drawings/magsafe-charging-case-for-airpods-pro-3.pdf No true-size file yet: the published figures do not fix the whole shape; a measured scan is planned. API: https://xemstudio.com/api/geometry?object=airpods-pro-3-case