Library › Computers & desk › Keyboard switches & stabilizers ·
Alps SKCM / SKCL switch: plate cutout and PCB footprint
What size is the Alps switch plate cutout and where are its PCB holes? · Standard part · basis: Alps SKCL/SKCM datasheet (mounting-panel hole drawing, panel t1.2, PCB mounting holes); key pitch and pin split from the KiCad SW_Matias_1.00u footprint
Also called: alps plate cutout, alps switch cutout 15.5 x 12.8, skcm cutout, skcl footprint, alps pcb holes, matias plate cutout, alps switch dimensions, alps plate thickness
Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features
- length
- 19.05 mm
- width
- 19.05 mm
Notes
- Alps SKCM / SKCL ('complicated' and 'simplified' Alps) switches and their clones (Matias, many vintage boards) clip into a 15.5 × 12.8 mm rectangular plate hole in a 1.2 mm plate, wider than tall, and have two Ø1.5 pins.
- Holes are seen from the switch mounting side, origin on the key centre, x to the right, y up: the pins are 5 mm apart, pin 1 at 4.5 mm and pin 2 at 4.0 mm above the key centre. Alps dimensions the 5 mm spacing; the ±2.5 split about the key centre is confirmed by the KiCad Matias/Alps footprint.
- The plate tile is the 19.05 mm key footprint; the cutout is at true size with square corners as Alps draws it.
Alps SKCM / SKCL switch: plate cutout and PCB footprint size chart
| parameter | value |
|---|---|
| plate (panel) cutout | 15.5 × 12.8 mm (15.5 across, 12.8 up) |
| plate thickness | t1.2 mm |
| pin 1 (x, y) | Ø1.5 at (+2.5, +4.5) mm |
| pin 2 (x, y) | Ø1.5 at (-2.5, +4.0) mm |
| key pitch (1u) | 19.05 mm |
Mating features
Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.
| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| plate cutout | 15.5 wide × 12.8 tall in a 1.2 plate, square corners | Alps SKCM / SKCL switch and clones (Matias) | designed | alps-plate* |
| PCB pins | Ø1.5 at (+2.5, +4.5) and (−2.5, +4.0), 5 apart; switch-mounting-side view | Alps switch pins | designed | alps-pcb* |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| Alps Alpine | SKCL/SKCM series push switch datasheet: mounting-panel hole drawing, panel t1.2, PCB mounting holes | web | Maker datasheet (linked, not rehosted) |
| KiCad | kicad-footprints: Button_Switch_Keyboard.pretty (SW_Cherry_MX_1.00u_PCB fixing pegs; SW_Matias_1.00u Alps-type pin positions) | web | CC BY-SA 4.0 with KiCad exception (footprints) |
Free files
★ Free files 2 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json
Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.
Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp- Claude: Add to Claude
- ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
- Cursor: install with one click. VS Code: install with one click.
| alps-plate-1u | 1u plate square 19.05 × 19.05 × 1.2 mm with the 15.5 × 12.8 mm Alps switch cutout, true size | STEP · STL |
| alps-pcb-footprint | Alps SKCM/SKCL PCB holes as a 1.6 mm drill jig: 2 × Ø1.5, 5 mm apart, 4.5 and 4.0 mm above the key centre, true size | STEP · STL |
https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=alps-skcm-skcl-plate-cutout-and-pcb-footprint

Fits with
Questions
What size hole does an Alps switch need?
15.5 × 12.8 mm in a 1.2 mm plate (Alps SKCL/SKCM datasheet).
Where are the Alps switch pins?
Two Ø1.5 holes 5 mm apart: (+2.5, +4.5) and (−2.5, +4.0) mm from the key centre, seen from the mounting side.

