Library › Phones, tablets & wearables › Smartwatches & wearables · 2024 ·

Apple Watch Series 10 / 11 (42 mm)

What are the Apple Watch Series 10 / 11 (42 mm) dimensions? · Modern device · basis: Apple accessory dimensional drawing (developer.apple.com/accessories); numbers transcribed, geometry built by Xem Studio

Also called: apple watch series 10 / 11 (42 mm) size, apple watch series 10 / 11 (42 mm) measurements

Exact dimensions. True size, with no tolerance added.

length
42.05 mm
width
36.44 mm
height
11.74 mm

Notes

  • From Apple's published dimensional drawing for Apple Watch Series 11, 42 mm: 36.44 × 42.05 × 11.74 mm (case without crown; 9.7 mm flat of back to flat of cover glass, the rest is the back dome). The body file is the case band lofted through the drawing's own profile table and corner-point table, with the back dome as a spherical cap through its printed diameter and apex height; crown, buttons and band slots are not modelled. Hollow it for a bumper, or subtract it for a dock or stand pocket.
  • Sizes are exact nominal millimetres, true size: add your own clearance.
  • Apple's notes for accessory makers: 1 CASE DOES NOT INTERFERE WITH CLICK OR ROTATION FUNCTION OF DIGITAL CROWN; CASE DOES NOT APPLY FORCE ON DIGITAL CROWN; CASE DOES NOT OBSTRUCT FACE OF CROWN; 2 CASE DOES NOT OBSTRUCT THE WATCH ACOUSTIC OPENINGS AND ALTIMETER AND MUST NOT DEGRADE ACOUSTIC OR WATER EJECTION PERFORMANCE; 3. NO METAL CASES ALLOWED DUE TO ANTENNA FUNCTION; 4 CASE DOES NOT OBSTRUCT THE WATCH CHARGING INTERFACE; 5 CASE DOES NOT OBSTRUCT THE WATCH OPTICAL SENSORS; 6 CASE DOES NOT EXTEND BEYOND WATCH SENSOR WINDOWS; 7 CASE DOES NOT CONTACT THE WATCH COVER GLASS; 8 CASE DOES NOT CONTACT ELECTRICAL SENSORS; 9 CASE DOES N
  • Apple Watch Series 10 / 11 (42 mm): 42 × 36 × 9.7 mm (height × width × depth), 1.65 × 1.42 × 0.38 in, 30 g, 1.65 in display.
  • Band groups: 38/40/41/42 mm cases share bands (lug slot 20 mm wide); 44/45/46/49 mm cases share bands (lug slot 24 mm). Lug slot depth about 2.5 mm; the band connector is a 1.5 mm thick tongue with spring-loaded buttons.
  • Charger puck: commonly given as Ø27.9 × 6.3 mm (magnetic fast charger); Apple does not publish it, so check yours before cutting a press-fit dock pocket (Ø28.2 for that size). See magsafe-and-watch-chargers.
  • Compare with the rest of the family on the Apple Watch Series 10/11 (42, 46 mm), Ultra 2/3 (49 mm), SE (40, 44 mm) sheet.

Apple Watch Series 10 / 11 size chart

parametervalue
width × length × thickness36.44 × 42.05 × 11.74 mm
overall (as printed)36.44 (front view, case width without crown, unlabelled)
overall (as printed)38.30 WIDTH WITH CROWN
overall (as printed)42.05 (front view, case height, unlabelled)
overall (as printed)33.89 COVER GLASS (width)
overall (as printed)39.50 COVER GLASS (height)
overall (as printed)29.17 DISPLAY ACTIVE AREA (width)
overall (as printed)34.79 DISPLAY ACTIVE AREA (height)
overall (as printed)11.74 APEX OF DOME TO FLAT OF DISPLAY GLASS
overall (as printed)9.70 FLAT OF BACK TO FLAT OF DISPLAY GLASS
overall (as printed)0.67 (side view, near back; unlabelled)
display active area29.17 × 34.79 mm
corner profile points (x from side, y from top)(0, 21.03); (0.02, 13.03); (0.35, 8.42); (1.57, 5.03); (3.19, 2.95); (5.33, 1.4); (8.78, 0.29); (13.22, 0.01); (18.22, 0)
edge profile (z from the flat of the back, inset)(9.7, 6.83); (9.69, 5.61); (9.6, 4.32); (9.29, 3.05); (8.63, 1.86); (7.61, 0.88); (6.31, 0.23); (4.85, 0); (3.39, 0.23); (2.09, 0.88); (1.07, 1.86); (0.41, 3.05); (0.1, 4.32); (0.01, 5.61); (0, 6.83)
flat of back to flat of cover glass9.7 mm
back domeØ25.39 mm, apex 2.04 mm below the flat of the back
digital crownØ9.25 CROWN DIAL KEEPOUT; Ø7.25 CROWN DIAL; 7.92 CROWN CENTER (from datum 0.00 along side); 5.07 CROWN CENTER (z, from case-side datum); 2X 36.5°
mic portØ3.00 MIC KEEPOUT; 2.20 MIC PORT CENTER
side button0.20 BUTTON (top end); BUTTON CENTER -5.76; -11.72 BUTTON (bottom end); z: 2.95, 5.08 BUTTON CENTER, 7.20
band slotno band slot dimensions printed
speaker (left side)SPEAKER KEEPOUT 2X 0.30 ALL AROUND (SECTION A-A)
cover glass clearancenote 7: 1.84
back dome / sensorsØ25.39 DOME DIAMETER; 1.00 ELECTRICAL SENSOR KEEPOUT; 2X DO NOT OBSTRUCT ELECTRICAL SENSORS; note 6 NO THICKNESS IN THIS REGION with 0.67
band release buttons15.44 and -15.44
SECTION B-B12.13°, 60.00°, 2.72°, 60.00°
charging0.86 MAXIMUM ALLOWABLE OFFSET FROM CHARGING PUCK CENTER; 12.13° (side view); note 2 DO NOT OBSTRUCT THIS PORT

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Apple (official)Apple Watch Series 10 tech specswebManufacturer spec page
Apple (official)Apple Watch Ultra 2 tech specswebManufacturer spec page
Apple (official)Apple Watch band compatibilitywebManufacturer spec page
Apple (official)Accessory Design Guidelines for Apple Devices (dimensioned drawings of every current device)PDFApple developer terms; drawings for accessory design
AppleApple Watch Series 11, 42 mm dimensional drawing (Accessory Design Guidelines)PDFApple's terms; linked, not hosted

Free files

★ Free files 1 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
apple-watch-series-10-11-42-mm-bodyApple Watch Series 11, 42 mm at true size: case band lofted through Apple's printed profile table (flat of back to flat of cover glass 9.7 mm), plan outline from the corner-point table; back dome drawn as a spherical cap through its printed Ø25.39 base and 2.04 mm apex height (its curvature is not dimensioned). Crown, buttons and band slots are not modelled.STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=apple-watch-series-10-11-42-mm

Apple Watch Series 10 / 11 (42 mm), isometric render of a generated part
Render of apple-watch-series-10-11-42-mm-body from the free STEP; not to scale.

Fits with

Questions

How big is the Apple Watch Series 10 / 11 (42 mm) in inches?

1.65 × 1.42 × 0.38 in (height × width × depth); 42 × 36 × 9.7 mm.

What are the Apple Watch Series 10 / 11 (42 mm) dimensions in mm?

42 × 36 × 9.7 mm, 30 g.